User manual

18 English
English 19
02 Connections
Connections
Stand Pole

Stand Bracket
Connect the Stand Pole to the Stand Bracket. 1.

Insert and tighten three large screws into the three holes on the
Stand Bracket as shown in the illustration.
2.

Straighten the speaker wire and route it through the Stand Pole. 3.
Connect the Stand Pole to the Stand Neck and
Stand Base.
- Make sure all holes are properly connected,
if not, the stand will fall down.
4.
Installing the Speakers on the Tallboy Stand
Stand Pole

Stand Base
Stand Neck