HT-C7550W 5.1CH Blu-ray Home Cinema System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-C7550W_ELS_0506.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous CAUTION : TO PREVENT ELECTRIC voltage” inside the product that presents SHOCK, MATCH WIDE BLADE OF PLUG a risk of electric shock or personal injury. TO WIDE SLOT, FULLY INSERT.
Precautions • Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. • Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). • Do not place the product on amplifiers or other equipment which may become hot. Make sure the ventilation slots are not covered. • Do not stack anything on top of the product. • Before moving the product, ensure the Disc Insert Hole is empty.
Safety Information Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Holding discs • Do not touch the playback side of the disc. • Hold the disc by the edges so that fingerprints will not get on the surface. • Do not stick paper or tape on the disc. Disc Storage • Do not keep in direct sunlight • Keep in a cool ventilated area • Keep in a clean Protection jacket.
Contents Safety Warnings Precautions Cautions on Handling and Storing Discs Licence Copyright GETTING STARTED 7 7 8 12 13 13 14 15 Icons that will be used in manual Disc Types and Characteristics Accessories Description Front Panel Rear Panel Remote control CONNECTIONS 17 22 23 25 26 27 28 Connecting the Speakers Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit Connecting External Devices/your TV via HDMI Connecting the Video Out to your TV Connecting Audio from External Compone
Contents SETUP 43 43 43 43 43 44 44 44 General Background Energy Saving Front Display Power On/Off Sound Support Software Upgrade Contact Samsung BASIC FUNCTIONS 45 45 46 47 47 48 50 52 53 54 55 56 Playing a Disc Using the Disc menu / Title menu / Popup menu Using the Search and Skip Functions Slow Motion Play/Step Motion Play Repeat Playback Using the TOOLS button Listening to Music Sound Mode Playing back a Picture Playing back a USB Storage Listening to Radio Using an iPod NETWORK SERVICES 58 62 6
01 Getting Started Getting Started Icons that will be used in manual Make sure to check the following terms before reading the user manual. Term Logo Icon h z Z BD-ROM BD-RE/-R DVD-VIDEO Definition This involves a function available on a BD-ROM. This involves a function available on a BD-RE/-R disc recorded in the BD-RE format. This involves a function available on a DVD-VIDEO.
Getting Started Disc Types and Characteristics Logos of Discs that can be played Blu-ray Disc Compatibility Blu-ray is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Types and Characteristics section of this Manual. If you encounter compatibility problems, please contact the SAMSUNG customer care centre.
01 Disc Types Both the product and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. BD-ROM Disc Type Blu-ray DVD-VIDEO Region Code Area A North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia. B Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand. C India, China, Russia, Central and South Asia. 1 The U.S., U.S.
Getting Started Audio CD DivX(Digital Video Express) • An audio disc on which 44.1kHz PCM Audio is recorded. • This product can play back CD-DA format audio CD-R and CD-RW discs. • The product may not be able to play some CD-R or CD-RW discs due to the condition of the recording. DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time.
01 Getting Started Supported File Formats Video File Support File Extension Container *.avi Video Codec Audio Codec Resolution Divx 3.11/4.x/5.1/6.0 MP3 AC3 DTS WMA PCM 1920x1080 XviD AVI MP4v3 H.264 BP/MP/HP 1920x1080 1920x1080 1920x1080 1920x1080 VC-1 AP *.mkv DivX 5.1/6.0 MKV XviD MP3 AC3 DTS 1920x1080 1920x1080 1920x1080 H.264 BP/MP/HP *.wmv WMV (wmv9) *.mp4 MP4 *.mpg *.mpeg PS VC-1 AP 1920x1080 WMA VC-1 SM MP4 (mp4v) H.264 BP/MP/HP MPEG1 MPEG2 H.
Getting Started Non-compliance • Does not support a device that requires installing a separate driver on the PC (Windows). • Does not support connection to a USB hub. • A USB device that is connected using an USB extension cable may not be recognized. Operational Limitations • If the connected device has multiple drives (or partitions) installed, only one drive (or partition) can be connected. • A device supporting USB 1.1 alone may cause a difference in the picture quality, depending on the device.
01 Getting Started Description Front Panel 1 2 3 4 5 6 7 8 9 10 1 2 DISPLAY Displays the playing status, time, etc. REMOTE CONTROL SENSOR Detects signals from the remote control. 3 FUNCTION BUTTON The mode switches as follows : BD/DVD D. IN AUX HDMI 1 HDMI 2 FM 4 5 6 STOP BUTTON Stops disc playback. PLAY/PAUSE BUTTON Plays a disc or pauses playback. VOLUME CONTROL Volume adjustment. 7 8 9 OPEN/CLOSE BUTTON Opens and closes the disc tray.
Getting Started Rear Panel 1 2 3 4 5 6 7 8 9 10 11 12 iPod 1 HDMI IN JACKS Receives digital video and audio signals simultaneously using an HDMI cable. 2 SPEAKER OUTPUT CONNECTORS Connect the front, centre, subwoofer speakers. 3 HDMI OUT JACK Use an HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture.
01 Getting Started Remote control Tour of the Remote Control POWER FUNCTION TV SOURCE BD RECEIVER/TV SLEEP Turn the product on and off. If you want to change to Home Cinema or TV mode on the remote control, check this button's LED colour. - Home Cinema : Orange - TV : Green Press numeric buttons to operate options. 1 2 3 4 5 6 7 8 0 Allows you to repeat a title, chapter, track or disc. Press to search backwards or forwards. Press to skip backwards or forwards. Press to pause a disc.
Getting Started Installing batteries in the Remote Control * Battery size: AAA TV Brand Code List Brand Code Brand Code Admiral (M.Wards) 56, 57, 58 Mitsubishi/ MGA 18, 40, 59, 60, 75 A Mark 01, 15 MTC 18 NEC 18, 19, 20, 40, 59, 60 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Nikei 03 Onking 03 01, 18, 40, 48 Onwa 03 Panasonic 06, 07, 08, 09, 54, 66, 67, 73, 74 AOC ✎ NOTE Make sure to match the “+” and “–” ends of Bell & Howell (M.
02 Connections Connections This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers SW Position of the product Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Connections Connecting the Speakers Speaker Components Assembled Speakers (L) (R) CENTRE CENTRE SPEAKER FRONT SCREW (Small): 8EA SCREW (Large): 24EA SUBWOOFER (L) (R) STAND NECK SURROUND STAND BRACKET STAND POLE STAND BASE SUBWOOFER FRONT/SURROUND SPEAKER SPEAKER CABLE SWA-5000 Wireless Receiver Module Speaker Cable (2EA) ✎ NOTE Refer to page 19 to install the Speakers on the Tallboy Stand. 18 English HT-C7550W_ELS_0506.
02 Connections Installing the Speakers on the Tallboy Stand 1. Connect the Stand Pole to the Stand Bracket. 1 Stand Bracket Stand Pole 2. Insert and tighten three large screws into the three holes on the Stand Bracket as shown in the illustration. 3. Straighten the speaker wire and route it through the Stand Pole. 4. Connect the Stand Pole to the Stand Neck and Stand Base. - Make sure all holes are properly connected, if not, the stand will fall down.
Connections Connecting the Speakers 5. Insert and tighten three large screws into the three holes on the bottom side of the stand-base as shown in the illustration. 6. Connect the speaker wire to the speaker jack. 5 6 7. Fully insert the Stand Bracket into the speaker's clasp to stand speaker. 7 8. Insert and tighten two small screws into the two holes to connect them. 8 20 English HT-C7550W_ELS_0506.
02 Connections Connecting The Speakers 1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab. 3. Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks. Black Red 4. Connect the left and right surround speakers to the wireless receiver module. 5.
Connections Connecting the Speakers ✎ NOTE Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, some sound interruption may be heard due to interference. If you use a device such as a microwave oven, wireless LAN Card or any other device that uses the same frequency (2.4/5.8GHz) near the product, some sound interruption may be heard due to interference.
02 Connections Connecting External Devices/your TV via HDMI HDMI is a standard digital interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set top box and more. HDMI removes any loss of signal from analogue conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source.
Connections Connecting External Devices/your TV via HDMI HDMI IN : Connecting to an External Component with an HDMI Cable 1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital devices. 2. Press the FUNCTION button to select HDMI 1 or HDMI 2 input. The mode switches as follows : BD/DVD D.
02 Connections Connecting the Video Out to your TV METHOD 1 Red Blue Green METHOD 2 iPod Yellow METHOD 1 : Component Video (BETTER QUALITY) If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (Pr, Pb and Y) Jacks on the back of the product to the Component Video Input Jacks on your TV.
Connections Connecting Audio from External Components iPod Optical Cable (not supplied) Red White Audio Cable (not supplied) If the external analogue component has only one Audio Out, connect either left or right. Set-Top Box VCR OPTICAL AUX OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital component. 2.
02 Connections Connecting to the Network This product supports network based services (see pages 58~63), BD-LIVE and software upgrade under the network connection. It is recommended to use an AP (Access Point) or IP router. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance. Cable Network 1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the LAN terminal of your modem. 2.
Connections Connecting to the Network Wireless Network You can connect to the network with a Wireless IP sharer. 1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the Wireless LAN Adapter on the rear panel of the product. - This unit is compatible with the supplied Wireless LAN Adapter. - You can also use the wireless network by connecting the Wireless LAN Adapter Gender to the Wireless LAN Adapter. 2. Set the network options.
03 Setup 1. Turn on your TV after connecting the product. (When the product is connected to TV for the first time, product will turn on automatically and the Initial Settings screen will be displayed.) Initial Settings I On-Screen Language 7. Press the ◄► buttons to the select the desired Network Settings: Wired, Wireless or PBC (WPS), then press the ENTER button. (See pages 39~42) The Network Test will start and Initial Settings will be completed.
Setup If you want to display Initial Setting screen again in order to make changes, press the STOP () button on the front panel of the product for more than 5 seconds with no disc inserted. Use the HDMI cable to connect the product to an Anynet+(HDMI-CEC)-compliant Samsung TV. If the TV uses a language supported by the product, that language will be set to a preferred language automatically. However, the Anynet+(HDMI-CEC) feature should be set to On in both TV and the product.
03 You can configure various display options such as the TV Aspect, Resolution, etc. TV Aspect Depending on the type of television you have, you may want to adjust the screen setting. • 16:9 Normal Certain movies(4:3 source) will be displayed in 4:3 Pillarbox (black bars on sides of picture) if 16:9 normal is selected. • 16:9 Wide You can view the full 16:9 picture on your widescreen TV.
Setup Resolution according to the output mode • Blu-ray Disc playback HDMI / connected Output Setup HDMI / not connected HDMI Mode Component/VIDEO Mode Component Mode VIDEO Mode Auto Optimal Resolution 576i(480i) - - 1080p, Movie Frame(24Fs) off 1080p@60F 576i(480i) - - 1080p/1080i, Movie Frame(24Fs) on 1080p@24F 576i(480i) - - 1080i, Movie Frame(24Fs) off 1080i 576i(480i) 1080i 576i(480i) 720p 720p 576i(480i) 720p 576i(480i) 576p(480p) 576p(480p) 576i(480i) 576p(480p) 5
03 Setup HDMI Format Progressive Mode You can optimize the colour setting from the HDMI output. Select a connected device Type. Set to improve picture quality when viewing DVDs. • TV : Select if connected to a TV via HDMI. • Monitor : Select if connected to a Monitor via HDMI. ✎ NOTE A TV or monitor has to be connected to the product before you select this option.
Setup Distance Audio If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, centre, surround and subwoofer speakers. Speaker Setting Settings Speaker Setting Display Audio System Network Language Security General Support | Level Distance Test tone : • You can set the Speaker Distance between 1ft(0.3m) and 30ft(9.0m).
03 By setting the Musical Auto Calibration (MAC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for your environment. ✎ NOTE Setup Musical Auto Calibration Setting the Musical Auto Calibration function takes about 3 minutes.
Setup ✎ NOTE Digital Output Set Digital output depending on the connected receiver. (For more details, please refer to the digital output selection.) Be sure to select the correct Digital Output or you will hear no sound or a loud noise. If the HDMI device (Receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio signal outputs as PCM. • PCM • Bistream(Re-encode) • Bistream(Audiophile) Secondary and Effect audio will not be heard with regular DVDs.
03 Setup Dynamic Range Control Anynet+(HDMI-CEC) You can listen at low volumes but still hear dialog clearly. This is only active when a Dolby Digital signal is detected. • Off : You can enjoy the movie with the standard Dynamic Range. • On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.
Setup Description of Device(Storage) Information on the Product DivX(R) Registration • Total Size : Total size of the Device (Storage). • Available Size : Available size of the Device (Storage). View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content. ✎ NOTE In the external memory mode, disc playback will be stopped if you disconnect the USB device in the middle of the playback. Only those USB devices formatted in FAT file system (DOS 8.
03 To begin setting up the network connection for your product, follow these steps: 1. In the Home menu, press the ◄► buttons to select the Settings, and then press the ENTER button. 2. Press the ▲▼ buttons to select Network, and then press the ENTER button. 3. Press the ▲▼ buttons to select Network Settings, and then press the ENTER button. 4. Press the ▲▼ buttons to select Network Type, and then press the ENTER button. 5. Press the ▲▼ buttons to select Wired or Wireless, and then press the ENTER button.
Setup Settings Network Settings Display On-Screen Menu Internet Protocol Setup : Manual Audio Disc Menu 0 IP Address : 0 System Audio Subnet Mask : 255 255 Subtitle Network 0 Gateway : 0 Language DNS : Manual Security 0 DNS Server : 0 General Support > Move " Select : : 0 : 255 : 0 2. Press the RED(A) button on the remote control. 3. Press the PBC (WPS) button on your router within two minutes.
03 Display Audio System Network Language Security General Support Network Settings Network Selection Connecting to network. Network Name(SSID) : shj Stop " Select ' Return 5. In the list of networks, press the ▲▼ buttons to select a network, and then press the ENTER button. 6. If the PIN/Security pop-up appears, go to Step 7. If the Network Connecting Screen appears, go to Step 11. 7. 8. Press the ▲▼ buttons to select PIN or Security.
Setup 5. 6. When done with each field, use the ► button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. Enter the IP Address, Subnet Mask, and Gateway values. 7. Press the ▼ to go to DNS. 8. Press the ▼ button to go to the first DNS entry field. Enter the numbers as above. 9. When done, press the ▲ button to return to Access Point Selection. Select the network, and then press the ENTER button. 10.
03 Setup Security General When you operate this menu for the first time, password setup screen will be displayed. Enter the desired 4-digit password using the number buttons. (Default password is set to 0000.) Background Change the background theme of the menu screen. Parental Rating This function works in conjunction with Blu-ray Disc/DVDs that have been assigned a rating, which helps you control the types of Blu-ray Disc/ DVDs that your family watches. Select the rating level you want to set.
Setup Support Software Upgrade This menu allows you to upgrade software for performance improvements or additional services. You can check the current software version, upgrade by internet and set the Auto upgrade notification. If the product is properly connected to the network by cable or wirelessly, the product will automatically connect to our website each time it is turned on and download update files if any valid upgrade exists.
Basic Functions Playing a Disc 04 Basic Functions Disc Structure The contents of disc are usually divided as below. Playback • Blu-ray Disc, DVD-VIDEO 1. Press the OPEN/CLOSE ( ) button to open the disc tray. 2. Place a disc gently into the tray with the disc’s label facing up. 3. Press the PLAY (►) button or OPEN/ CLOSE ( ) button to close the disc tray.
Basic Functions Using the Title Menu Using the Search and Skip Functions Z 1. During playback, press the TITLE MENU button on the remote control. 2. Press the ▲▼◄ ► buttons to make the desired selection, then press the ENTER button. TITLE MENU POPUP Searching for a Desired Scene hzZyx ✎ NOTE Depending on the disc, the menu items may differ and this menu may not be available. The Title Menu will only be displayed if there are at least two titles on the disc. Playing the Title List z 1.
04 Basic Functions Slow Motion Play/Step Motion Play Repeat Off Slow Motion Play hzZyx • In pause mode, press the SEARCH () button. If you press the SEARCH () button, the playback speed is reduced to * 1/8 * 1/4 * 1/2 • To return to normal speed playback, press the PLAY (► ) button. ✎ NOTE 3. To return to normal play, press the REPEAT button again. 4. Press the ▲▼ buttons to select Off, the press the ENTER button. ✎ NOTE Depending on the disc, the Repeat function may not be available.
Basic Functions Information about the primary / secondary Using the TOOLS button During playback, you can operate disc menu by pressing the TOOLS button. TOOLS • TOOLS Menu Screen Tools Title : 1/1 Chapter 4/21 Playing Time : 00:12:06 Repeat Audio : 1/7 ENG Multi CH Subtitle : 1/6 ENG Angle : 1/1 BONUSVIEW Video : Off BONUSVIEW Audio : 0/1 Off mode will be also displayed if the Blu-ray Disc has a BONUSVIEW section. Use the ◄► button to switch between primary and secondary audio modes.
04 x • You must have some experience with video extraction and editing in order to use this feature properly. • To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media f le (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi • Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.
Basic Functions Listening to Music ow Buttons on the Remote Control used for Music Playback @ 1 2 3 4 5 6 7 8 9 FULL SCREEN ENTER button : Plays and pauses the selected track. 8 ◄► buttons : Fast Play. (except for Audio CD (CD-DA)) 9 STOP button : Stops a track. 0 SKIP($) button : During playback, moves to the next page in the Music List or moves to the next track in the Playlist.
04 Repeat an Audio CD (CD-DA)/MP3 1. Insert an Audio CD (CD-DA) or an MP3 Disc into the disc tray. • For an Audio CD (CD-DA), the first track will be played automatically. • For an MP3 disc, press the ◄► buttons to select Music, then press the ENTER button. 1. During the Playlist playback, press the REPEAT button. 2. Select the desired play mode by pressing the REPEAT button repeatedly. Off Tracks on a disc are played Audio CD in the order in which they (CD-DA)/MP3 were recorded on the disc.
Basic Functions 4. If there is an undesired track in the playlist, press the YELLOW(C) button again. The selected track will be deleted. 5. Press the ENTER button to play the selected tracks. The selected track will automatically play. 1/1 Playlist TRACK 001 + Sound Mode DSP(Digital Signal Processor) Function This will regulate and stabilize the volume level against a drastic volume change when changing channels or during a scene transition.
04 Using the TOOLS button You can select the desired Dolby Pro Logic II audio mode. During the slide show playback, you can use various function by pressing the TOOLS button. Press the MUSIC MOVIE PL II button. When listening to music, you can experience sound effects as if you are listening to the actual performance. Basic Functions Dolby Pro Logic II Mode TOOLS Tools Stop Slide Show Slide Show Speed : Normal Background Music Zoom Adds realism to the movie soundtrack.
Basic Functions ✎ NOTE Playing back a USB Storage F You can use the USB connection to play multimedia files (MP3, JPEG, DivX, etc) downloaded from the USB storage device. 1. Move to the home menu. 2. In Stop mode, connect the USB storage device to the USB port on the side of the product. The message “Do you want to access the device?” will be displayed. 3. Press the ◄► button to select Yes, then press the ENTER button. 4. Press the RED(A) button.
04 Using buttons on the Remote Control Example : Presetting FM 89.10 into memory 1. Press the FUNCTION button to select FM. 2. Tune in to the desired station. • Automatic Tuning 1 : When the # $ button is pressed, a preset broadcast station is selected. • Automatic Tuning 2 : Press and hold the ) button to automatically TUNING/CH ( search for active broadcasting stations. • Manual Tuning : Press the TUNING/CH ) button to increase or decrease the ( frequency incrementally.
Basic Functions ✎ NOTE Using an iPod You can enjoy music, video files from an iPod through the product. Adjust the volume to a moderate level before you connect your iPod and product. When the product is powered on and you connect an iPod, the product will charge your iPod's battery. Make sure to connect the dock connector so that the label “SAMSUNG” faces upward.
04 Basic Functions Watching a Movie You can play video files stored in the iPod player by connecting it to the product. 1. Connect the iPod dock connector to the iPod Jack on the rear panel of the product. 2. In the iPod screen, move to Settings > Videos, then set the TV Out option and the TV signal. 3. Place the iPod in the supplied iPod Dock. • “iPod” message appears on the TV screen. 4. Press the RED(A) button. 5. Press the ▲▼ buttons to select iPod, then press the ENTER button. 6.
Network Services You can enjoy various network services such as Internet@TV or BD-LIVE by connecting the product to the network system. Check the following instructions before using any network service. 4. After you have signed off on the service agreement, the Internet@TV service starts updating. It takes several minutes. When the update is complete, you will see the Internet@TV menu screen. 1. Connect the product to the network. (see pages 27~28) Internet@TV at a Glance 2.
05 13. Press the ENTER button. Through your remote, you can use the OnScreen Keypad in several Internet@TV applications to enter text. Pressing the FULL SCREEN button on the remote while you are using the Screen Keypad lets you to change the text fields to lower case, upper case, numbers and icons. 14. The map and address appear on the screen.
Network Services Account Login System Setup For a more enjoyable application experience, register and log in to your account. Reset To do this, you must create an account first. (For instructions on creating an account, refer to Internet@TV ID on this page) 1. Press the ▲▼◄► buttons to select the desired application and press the RED(A) button. Resets Internet@TV settings to factory default settings.
05 Delete and lock applications installed to Internet@ TV. Lock Lock the application. Accessing a locked application requires the password. Using the colour buttons with the Samsung Apps • RED(A) (Login) : To log in to the internet service. • GREEN(B) (Thumbnail View) : To change the view mode. • BLUE(D) (Sort By) : To sort the applications by Featured, Most Downloaded, Most Recent or Name. Network Services Service Manager Delete Delete the application.
Network Services Using the AllShare Function BD-LIVE™ Once the product is connected to the network, you can enjoy various movie-related service contents using a BD-LIVE compliant disc. 1. Check the size of the remaining memory. The memory device must have at least 1GB of free space to accommodate the BD-LIVE services. 2. Insert a Blu-ray disc that supports BD-LIVE. 3. Select an item from various BD-LIVE service contents provided by the disc manufacturer.
05 Application Program at a Glance 6 1 SAMSUNG PC Share Manager File Share Server Help Server : PC Share Manager 2345 My Computer a Change Device d View Devices Shared Folder C: Document and settings Admin You Tube internet radio service Please activate Internet@TV to enjoy a variety of Internet Services. No Disc Name Folder 1 " Enter ✎ NOTE Depending on te performance of the external modem or router, HD video may not play properly.
Other information Troubleshooting Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the product, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Centre. Symptom Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. The iPod fails to connect.
06 Check/Remedy Aspect ratio cannot be changed. • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. • The product is not working. (Example: The power goes out or a strange noise is heard.) • Turn off the power, and press and hold the STOP ( ) button on the remote control for longer than 5 seconds with no disc inserted.
Other information Symptom Check/Remedy PC Share Manager function I can see folders shared through the PC Share Manager, but I cannot see the files. • Since it shows only files corresponding to the Image, Music, and Movie categories, files that do not correspond to these categories may not be displayed. AllShare function Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded.
06 Other information Specifications General FM Tuner Weight 2.5 kg Dimensions 420 (W) x 133 (H) x 178 (D) mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % to 75 % Signal/noise ratio 70 dB Usable sensitivity 10 dB Total harmonic distortion 0.5 % BD (Blu-ray Disc) DVD (Digital Versatile Disc) Disc CD : 12cm (COMPACT DISC) CD : 8cm (COMPACT DISC) Composite Video Reading Speed : 4.917m/sec Reading Speed : 3.49 ~ 4.06 m/sec. Approx.
Other information 5.1ch speaker system Speaker system Speaker Front Surround Centre Subwoofer Impedance 3Ω 3Ω 3Ω 3Ω Frequency range 140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 40Hz ~ 160Hz Output sound pressure level 87dB/W/M 87dB/W/M 87dB/W/M 88dB/W/M Rated input 133W 133W 134W 134W Maximum input 266W 266W 268W 268W Dimensions (W x H x D) Front : 94 x 1300 x 90 mm (Stand base : ø 308 mm) Surround : 94 x 1300 x 90 mm (Stand base : ø 308 mm) Centre : 360 x 74.5 x 68.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Area Contact Centre ` North America Canada 1-800-SAMSUNG (726-7864) Mexico 01-800-SAMSUNG (726-7864) U.S.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
