User manual

English 19
02 Connections
Stand Pole
1
Stand Bracket
Connect the Stand Pole to the Stand Bracket. 1.
2
Insert and tighten three large screws into the three holes on the
Stand Bracket as shown in the illustration.
2.
3
Straighten the speaker wire and route it through the Stand Pole. 3.
Connect the Stand Pole to the Stand Neck and
Stand Base.
- Make sure all holes are properly connected,
if not, the stand will fall down.
4.
Installing the Speakers on the Tallboy Stand
Stand Pole
4
Stand Base
Stand Neck
HT-C7550W_ELS_0506.indd 19HT-C7550W_ELS_0506.indd 19 2010-05-06  11:28:182010-05-06  11:28:18