User Manual
Table Of Contents
- Safety Warnings
- Precautions
- Features
- Contents
- Notes on Discs
- Description
- Connecting the Speakers
- Connecting the Optional Wireless Receiving Amplifier
- Connecting the Video Out to your TV
- P.SCAN (Progressive Scan) Function
- Connecting Audio from External Components
- Connecting the FM Antenna
- Before Reading the User's Manual
- Before Using Your Home Theater
- Disc Playback
- MP3/WMA-CD Playback
- JPEG File Playback
- DivX Playback
- Using the Playback Function
- Playing Media Files using the USB Host Feature
- Settings
- Listening to Radio
- Convenient Functions
- Operating a TV with the Remote Control
- Troubleshooting
- Cautions on Handling and Storing Discs
- Language Code List
- USB Host Feature Supported Products
- Specifications
- Warranty
- Contact SAMSUNG WORLD WIDE
ENG
SETUP
4544
Settings (Con’t)
You can adjust the balance and level for each speaker.
1 In Stop mode, press the MENU button.
2
Press the Cursor button to move to <Audio> and then press the ENTER button.
3 Press the Cursor button to move to <SOUND EDIT> and then press
the ENTER button.
4 Press the Cursor , button to select and adjust the desired item.
Press the Cursor , button to adjust the settings.
Press the RETURN button to return to the previous level.
Press the MENU button to exit the setup screen.
Setting the Audio
Press the SOUND EDIT button and then press the Cursor , button.
Adjusting Front/Rear Speaker Balance
• You can select between 00, -6, and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
Use the Test Tone feature to check the speaker connections.
1 In Stop mode, press the MENU button.
2
Press the Cursor button to move to <Audio> and then press the ENTER button.
3 Press the Cursor button to move to <TEST TONE> and then press
the ENTER button.
The test tone will be sent to L ➝ C ➝ R ➝ SR ➝ SL ➝ SW in order.
If the ENTER button is pressed again at this time, the test tone will stop.
Press the RETURN button to return to the previous level.
Press the MENU button to exit the setup screen.
Setting the Test Tone
Press the TEST TONE button.
■
Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
■
Use this function to check that each speaker is correctly connected and that there is
no problem.
To end the test tone, press the TEST TONE button again.
Alternative method: press the TEST TONE button on the remote.
Multi-Channel Pro Logic Mode
Start
L: Front Speaker (L) C: Center Speaker SW: Subwoofer
R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)
X20(40~63P) SEA 2007.3.31 2:59 PM Page 44