Manual

connections

iNSTALLiNG THE WALL MOUNT

Youcan usethe wa mount bracketto mount this unit on a wa_

installation Precautions

• Bnstallon a vertical wall only_

• [Forthe installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the

weight of the set.

• Check the strength of the wall. Bfthe wall isnot strong enough to support the unit, reinforce the wall or install

the unit on a different wall that can support the unit's weight

• Purchase and usethe fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron

board, wood, etc_)_Bfpossible, fix the support screws into wall studs_

• Purchasewall mounting screws according to the type and thickness of the wall you will mount the Soundbar

on_

• Diameter : M5

• Length: i 3/8 in (35 ram) or longer recommended.

• Connect cablesfrom the unit to external devices before you install it on the walk

• Make sure the unit isturned off and unplugged before you install it

Otherwise, it may cause an electric shock

Hace the instal!ation guide against the wail surface_

. The installation guide must be placed parallelto the

wall

. Installationshould bedone at least2 inches(5 cm)

below the TV

2, Mark the location where the screws wiil go through

on the wali using a pen, and then remove the

installation guide_

Fastenthe wail mount and screw to the marked

iocation_

. The left and right mounts are different shapes

Securethe two ho!der screws to the screw ho!es on

the back of the Soundbar's main body, one on the

ieft and one on the right_

5, Insert the USB cable into the unit before installing it

on the waik

, Setthe holder screws on the back of the Soundbar

into the grooves of the wal! mounL

Forsafe instal!ation, make sureto push the hotder

screws atl the way to the bottom of the grooves_