Manual

funcJtions

To connect the Soundbar to a Bluetooth device

Check if the BJuetooth device supports the Biuetooth compliant stereo headset function.

÷ Connect

Bluetooth device

1 Press the SOURCE button on the remote control of the Soundbar to display the BT message,

• You wilJ see BT READY on the front disp ay of the Soundbar.

2. On the Bluetooth device you want to connect, open the Bbetooth menu, (Refer to the Bbetooth device's

user manual,)

3. Select the Stereo headset menu on the Bbetooth device,

• You will see a ist of scanned device£

4. Seect "[Samsung] SoundbaP from the isL

• When the Soundbar isconnected to the B uetooth device, it wiJ disp ay Device name '_ BTon the front disp ay.

• Bfthe Bluetooth device has faiJed to pair with the SoundbaB delete the previous "[Sarnsung] SoundbaR found by

the Biuetooth device and have it search for the Soundbar again.

• If the Soundbar is in another mode (except TV mode), you can shift it to Biuetooth mode using your smart

device.

5. Piay music on the connected device.

• You can isten to the music paying on the connected B uetooth device over the Wire ess Audio - Soundbar

system.

• In BT mode, Repeat functions are not avaiJab e. For some B uetooth device, PayiStopiNextiPrev function are not

available.

You may be required to enter a PIN code (password) when connecting the Bbetooth device to the

Soundbar, If the PIN code input window appears, enter <(0000>,

The Soundbar supports SBC data (44,i kHz, 48kHz),

The AVRCP feature issupported,

Connect only to a Bbetooth device that supports the A2DP (AV) function,

You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function,

Only one Bluetooth device can be paired at a time,

Once you have turned off the Soundbar and the pairing is disconnected, the pairing will not be

restored automatically, To reconnect, you must pair the device again,

The Soundbar may not run the Bbetooth Search or Connection functions properly in the following

cases:

If there is a strong electrical field around the Soundbar,

If several Bbetooth devices are simukaneously paired with the Soundbar,

If the Bluetooth device is turned off, not in place, or malfunctions,

Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas

stoves use the same frequency range as the Bluetooth device, which can cause electric interference,

Once paired the device,on ARC!DIN!USBiHDMIiAUX mode,se ect "[Samsung] Soundbar" from the ist

will automatically change to BT mode,