Manual

USB
nctions
Once the pairing is established, when you change the Soundbar to the TV mode from other input modes, it
will automatica Jyconnect to the TV_
• The Soundbar will pay the TV's audio when it isconnected to the TV_
• Changing the Soundbar from TV mode to any other mode wil cance the SoundConnect connection_
• If you want to cance the existing pairing of the Soundbar to a TV and pair your Soundbar to a different TV:
o Pressthe PLAY/PAUSE button on the Soundbar for 5 seconds in the TV input mode to cance the existing
pairing_ You can now pair it to a different TV_
• In the SoundConnect mode, you can contro the voume and mute using either the TV remote or the Soundbar
remote_
TV SoundConnect operation range
recommended pairing range: within 20 inches (within 50cm)
recommended operation range: within 1625 fL (Sm)
Bfthe distance between the Soundbar and Samsung TV is over i 625 ft. (Sin), the connection or the
sound can be cut off. Bfthis occurs, connect to the Samsung TV again within the operational range_
Make sure the Samsung TV's SoundConnect mode is on before you use this function_
The PLAY, NEXT, PREV,STOP buttons will not work in the SoundConnect mode_
Bluetooth Power On function
o The Soundbar will be powered on automatica y when you turn the TV on if you connected the TV and
Soundbar with the SoundConnect function_
o You can togge this function On/Off by pressing and ho ding the SOURCE button on the Soundbar
remote for more than 5 seconds when the Soundbar is powered ofL If set to Off, the product turns off
automatica Jywhen the TV turns off, but it does not turn on automatica y_
o This feature issupported by TVs re eased beginning in 2013_
'_' The SoundConnect feature is supported by select models released from 2012 on_ Checkwhether your TV
supports SoundConnect (SoundShare) before you begin_ (For more information, refer to the user's guide of your
TV,)
!_ Connect a USB device to the USB port on the side of the unit_
2_ Pressthe (1=,)button on the front pane of the Soundbar repeated y unti USB appears_
3_ USB appears on the display screen and then disappears_
• The Wire ess Audio o Soundbar connection is comp ete_
Before you connect a USB device
Be aware of the following:
• If the file name of a folder on a USB device exceeds i 0 characters,
it is not shown on the Soundbar's display.
• This product may not be compatible with certain types of USB
storage media_
• The Soundbar supports the FAT16 and FAT32 file systems_
o The NTFSfile system is not supported_
18