User manual

2120
ENG
FUNCTIONS
TV SOUNDCONNECT
You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV
SoundConnect function.
+ Connecting a TV to the Soundbar
Connect
1. Turn on the TV and Soundbar.
•Turn on the menu of the TV.
•Move to Speaker Settings on "Sound" tab.
•Set the "Add New Device" menu to "On".
2. Press the ( ) button on the main unit’s top
panel or the (SOURCE) button on the
remote control to select the TV mode.
3. On the TV, a message asking whether to enable
the TV SoundConnect function. "[Samsung]
Soundbar" is displayed on the TV screen.
4. Select <Yes> to finish connecting the TV and
Soundbar by TV remote control.
● Switching the Soundbar’s mode from TV
to another mode automatically terminates
TV SoundConnect.
● To connect the Soundbar to another TV,
the existing connection must be
terminated.
● Terminate the connection to the existing TV,
and then press the +# button on the
remote control for 5 seconds to connect to
another TV.
● The TV SoundConnect (SoundShare)
function is supported by some Samsung
TVs released from 2012 on. Check
whether your TV supports the TV
SoundConnect (SoundShare) function
before you begin. (For further
information, refer to the TV’s user
manual.)
● If your Samsung TV was released before
2014, check the SoundShare setting
menu.
● If the distance between the TV and
Soundbar exceeds 5 m, the connection
may not be stable or the audio may stutter.
If this occurs, relocate the TV or Soundbar
so that they are within operational range,
and then re-establish the TV
SoundConnect connection.
● TV SoundConnect Operational Ranges:
- Recommended pairing range:
within 50 cm
- Recommended operational range:
within 5 m
● The Play/Pause, Next, Prev buttons are
not operable in TV SoundConnect mode.
+ Using the Bluetooth POWER On
function
The Bluetooth POWER On function is available after
you have successfully connected the Soundbar to a
Bluetooth compatible TV using TV SoundConnect.
When the Bluetooth POWER On function is ON,
turning the connected TV on or off will turn the
Soundbar's power on and off as well.
1. Connect the TV to your Soundbar using the TV
SoundConnect function.
2. Press the Bluetooth POWER button on the
Soundbar remote. "ON/OFF-BLUETOOTH
POWER" appears on the Soundbar's display.
•ON-BLUETOOTH POWER : The Soundbar turns
on and off when you turn the TV on or off.
•OFF-BLUETOOTH POWER : The Soundbar only
turns off when you turn the TV off.
● This function is supported by some
Samsung TVs released from 2013 on.
HW-J450-XU ENG-0115.indd 21 2015/1/30 8:40:00