User manual
98
ENG
REMOTE CONTROL
REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
WOOFER (*Use the
[
,
]
button to adjust volume )
You can control the woofer volume.
Press the
[
,
]
button to increase or decrease the subwoofer
volume. You can select SW (-12, -6,-5,-4,-3,-2,-
1,0,+1,+2,+3,+4,+5,+6).
AUTO POWER
Auto Power Link: Synchronizes the Soundbar to a connected Optical
source via the Optical jack so it turns on automatically when you turn
on your TV.
(Auto Power Link : Default OFF, ON-Anynet+ / OFF-POWER LINK or
OFF-Anynet+ / ON-POWER LINK ). The Anynet+ function lets you
control the Soundbar with the remote from an Anynet+ compatible
Samsung TV. The Soundbar must be connected to the TV via an HDMI
cable.
* Anynet+:
Press the AUTO POWER button to turn the Anynet+
function on or off.
REPEAT
Press to set the REPEAT function during music playback from a USB
device.
OFF-REPEAT : Cancels Repeat Playback.
TRACK-REPEAT : Repeatedly play a track.
ALL-REPEAT : Repeatedly play all tracks.
RANDOM-REPEAT : Plays tracks in random order.
(A track that has already been played may be played again.)
MUTE
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
SOURCE
Press to select a source connected to the Soundbar.
Skip Forward
If there is more than one file on the device you are playing, and you
press the ] button, the next file is selected.
● Soundbar is a Samsung proprietary name.
● Operate the TV using the TV's remote control.
SOUND CONTROL (*Use the
[
,
]
buttons to adjust level.)
Press to select TREBLE, BASS, or AUDIO SYNC.Then, use the
[
,
]
buttons to adjust the Treble, Bass volume from -6 to +6.
If the Soundbar is connected to a digital TV and the video appears out
of sync with the audio, press the SOUND CONTROL button to sync the
audio with the video.
Use the [,] buttons to set the audio delay
between 0 ms and 300 ms.
In USB mode, TV mode, and BT mode, the
Audio Sync function may not work.
Press and hold the SOUND CONTROL button for about 5 seconds to
adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz,
1.2KHz,2.5KHz, 5KHz and 10KHz are selectable and each can be
adjusted to a setting between -6 and +6.
HW-J450-XU ENG-0115.indd 9 2015/1/30 8:39:54