User Manual
Table Of Contents
- ENG
- Checking the Components
- Product Overview
- Using the Soundbar Remote Control
- Inserting Batteries before using the Remote Control (AAA batteries X 2)
- How to Use the Remote Control
- Active Voice Amplifier (AVA)
- Using the Hidden Buttons (Buttons with more than one function)
- Output specifications for the different sound effect modes
- Adjusting the Soundbar volume with a TV remote control
- Connecting the Soundbar
- Connecting to a TV
- Connecting an External Device
- Connecting a Mobile Device
- Connecting via Apple Airplay 2
- Installing the Wall Mount
- Installing the Soundbar in front of TV
- Software Update
- Troubleshooting
- License
- Open Source License Notice
- Important Notes About Service
- Specifications and Guide
- SPA
- Verificación de los componentes
- Información general del producto
- Uso del control remoto de la Soundbar
- Colocación de las baterías antes de utilizar el control remoto (2 baterías AAA)
- Cómo usar el control remoto
- Amplificador de voz activo (AVA)
- Uso de los botones ocultos (botones con más de una función)
- Especificaciones de salida para los diferentes modos de efectos de sonido
- Ajuste del volumen de la Soundbar con un control remoto de TV
- Conexión de la Soundbar
- Conexión a un TV
- Conexión a un dispositivo externo
- Conexión a un dispositivo móvil
- Conexión mediante Apple AirPlay 2
- Instalación del soporte de montaje en la pared
- Instalación de la Soundbar frente al TV
- Actualización de software
- Resolución de problemas
- Licencia
- Aviso sobre la licencia de código abierto
- Notas importantes sobre el servicio
- Especificaciones y guía
ENG - 16
Auto EQ
The Auto EQ technology of Samsung provides more natural and softer bass by calibrating low frequency detected via the mic on the subwoofer.
Low frequency usually occurs due to the size of the room and the location of the subwoofer.
• Ensure the subwoofer is placed at least 8 cm away from walls, furniture or other partitions.
• You must keep the room as quiet as possible while operating the Auto EQ tuning.
• Do not use any buttons until the Auto EQ tuning is complete.
• Auto EQ tuning takes about 2 minutes.
• During Auto EQ tuning, there is no sound from the Soundbar’s main unit and rear speakers.
1. Press the (Sound Control) button until Auto EQ is selected.
2. Press the Up/Down buttons to select Tuning, and then press the button.
3. Tuning will start, and the progress appears in percentage.
‒ To cancel tuning, press the Up, Down, Left, Right or button, and then press the button to conrm.
‒ If the tuning is failed, LED blinks in red.
‒ If the tuning is successful, LED blinks in blue.
If you have done the tuning process
1. Press the (Sound Control) button until Auto EQ is selected.
2. Press the Up/Down buttons to select Tuning, and then press the button.
3. Press the Up/Down buttons to select one of the following options.
‒ On: Turn on the previously tuned EQ settings.
‒ Off: Turn on the default EQ settings.
‒ Tuning: Start the tuning process again.