User Manual 2021.05.27
Table Of Contents
- HW-LST70T_ENG
- 01 Checking the Components
- 02 Product Overview
- 03 Using the Remote Control
- 04 Connecting the Soundbar
- 05 Installing the Wall Mount
- 06 Using a wired connection to the TV
- 07 Using a wireless connection to the TV
- 08 Connecting an External Device
- 09 Connecting a Mobile Device
- 10 Connecting an Amazon product
- 11 Software Update
- 12 Troubleshooting
- 13 License
- 14 Open Source License Notice
- 15 Important Notes About Service
- 16 Specifications and Guide
- HW-LST70T_FRC
- 01 Vérification des composants
- 02 Présentation du produit
- 03 Utilisation de la télécommande
- 04 Connexion du Soundbar
- 05 Installation du support mural
- 06 Utilisation d'une connexion filaire avec le téléviseur
- 07 Utilisation d'une connexion sans fil avec le téléviseur
- 08 Connexion d'un appareil externe
- 09 Connexion d'un appareil mobile
- 10 Connecter un produit Amazon
- 11 Mise à jour logicielle
- 12 Dépannage
- 13 Licence
- 14 Avis de Licences Libres
- 15 Remarque Importante Concernant le Service
- 16 Caractéristiques et Guide
ENG - 17
04 CONNECTING THE SOUNDBAR
Connecting Electrical Power
Connect the Soundbar to an electrical outlet in
the following order:
1. Connect the AC/DC adapter to the Soundbar.
2. Connect the power cord to a wall socket.
• For more information about the required
electrical power and power consumption,
refer to the label attached to the product.
(Label: Bottom of the Soundbar Main Unit)
CAUTION ! TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE AC/DC
ADAPTOR TO RAIN OR MOISTURE.
Rear of the Soundbar Main Unit
SERVICE
DC 23V
DIGITAL
AUDIO IN
(OPTICAL)
SERVICE
DC 23V
DIGITAL
AUDIO IN
(OPTICAL)
AC/DC Adapter
• While the cable is not in use, seal it with the
silicone.
NOTES
• If you unplug and reconnect the power
cord when the product is turned on, the
Soundbar turns on automatically.
• Never forcibly pull the power cord of AC/
DC adapter.
• When installing the AC/DC adapter
horizontally, place it with the Samsung
logo facing upward.
How to mount the AC/DC
adapter
• Tighten 2 or 4 screws (not supplied) on the
wall or table and then insert them into the
grooves on the rear of the AC/DC adapter.
You cannot install the adapter directly on
the oor.
• For the mounting screws, see the following
gures.
RecommendedScrewspecication
(not supplied)
L12
M3
0.26”
(6.5 mm)
0.18”
(4.5 mm)