User's Manual

Shooting options 48
Shooting in the dark
Adjusting the amount of flash
Adjust the amount of flash to avoid overexposure or
underexposure.
In Shooting mode, press [
1
m ].
Select
2
Shooting ¢ Flash EVC.
Adjust the amount of flash.
3
0
Back Move
Adjusting the flash amount may not be effective if:t
the subject is too close to the camera -
you set a high ISO speed -
the exposure value is too big or too small -
In some shooting modes, you cannot use this function.t
pAhn
Option Description
Slow Sync:
The flash fires and the shutter stays open longer.
t
Select this when you want to capture ambient light to
t
reveal more details in the background.
Use a tripod to prevent your photos from blurring.
t
Fill in:
The flash always fires.
t
Light intensity is adjusted automatically.
t
Red-eye*:
The flash fires when the subject or background is dark.
t
The camera reduces red-eyes.
t
Auto: The flash fires automatically when the subject or
background is dark.
The options may differ depending on the shooting mode.
* There is an interval between two bursts of the flash. Do not move until
the flash fires a second time.
Flash options are not available if you set burst options or select t
Self-Portrait or Blink Detection.
Make sure that your subjects are within the recommended distance t
from the flash. (p. 104)
If there is reflected light or much dust in the air, tiny spots may appear t
on your photo.