User guide

OfficeServ DataView User Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
25
Each field is described below:
Item Description
OfficeServ Link
Connection
Enter the IP address of OfficeServ Link and the port number for
connection.
If you are not aware of the port number, contact the OfficeServ Link
manager and enter a valid value.
Data Manager
Listen Port
Specify a port to be connected to Data Manager. If another
application already uses Port Number. 5001 on a computer where
OfficeServ DataView is installed, the default value, 5001, should be
changed to another value.
Log Information Save an operation log of Data Collector in this field.
If an error occurs while using Data Collector, this field will allow you
to trace the error.
Level of detail in log information depends on log levels. There are
three log levels of None to Detail.
Set Log File Size to 1 MB to 100 MB and Log File Count to 1 to 20.
Set [Log Print] to Simple or Detail in order to display log information
through Debug View.
Data Collector
Option
Set Startup Mode to Automatic. Then, even if you do not click the
[Run] button of Data Collector, Data Collector will start.
If Startup Mode is set to Manual, click the [Run] button to start
operation.
No values other than those of [Log Level] and [Log Print] can be changed in a
running Data Collector.