Installation guide

CHAPTER 2. MMC Programming OfficeServ 7400 Programming Guide
Samsung Business Communications 2-258
[750] VM CARD RESTART
This MMC is used for the Samsung Built-In Voice Mail module.
There are four options available in this MMC:
No Option Description
0 MBX DOWNLOAD When the Built-In Voice Mail module starts, part of the power-up
procedure will download data from the system to determine time,
date, what mailboxes to create, and system numbering plan. This
must be done at least once, but once done this download feature
can be turned off (NO) to save booting time.
1 VM RESTART If this option is set to YES the Built-In Voice Mail module will im-
mediately restart according to the DOWNLOAD option specified
above.
This option determines which type of virtual port to include during
the mailbox and system numbering plan downloading procedure.
The virtual port type are as follows:
No Type Description
0 VIRTUAL EXT Virtual extension number
1 DESKTOP ITP DESKTOP IP-based phone number
3 MOBILE ITP Wireless IP-based mobile phone num-
ber
4 BRI STATION ISDN terminal number
5 VOIP NET TRK VoIP networking trunk number
6 VOIP 323 TRK VoIP H.323 trunk number
7 VOIP SIP TRK VoIP SIP trunk number
2 VIRTUAL NUMBER
DOWNLOAD
8 REMOTE STN Remote station number via networking
There are three methods for connecting voice mail to OS7400:
No Type Description
0 IP-UMS SERVER Connect via separate, unified messag-
ing server
1 SVMi CARD Connect via SVMi-20E module
3 VM CONNECTION
2 DLI CONNECT Connect via SVM-400
Removing Built-In Voice Mail Module
If during any test procedures you need to run the system with a default database
and power up with options set to YES, the Built-In Voice Mail database will be
overwritten according to the data in MMC 751 and the default numbering plan. If
you plan this type of test, remove the Built-In Voice Mail module until the proce-
dure is finished and the customer database is reloaded.