Installation guide

CHAPTER 2. MMC Programming OfficeServ 7400 Programming Guide
Samsung Business Communications 2-296
[815] CUSTOMER DATABASE COPY
This enables the on-board customer database (SRAM) to be copied to the Smart Media
card database (SMDB) and also allows the SMDB to be copied to the SRAM. A daily save
can be programmed to automatically save the SRAM to the SMDB. This ensures that an
up-to-date database is always available in case of a catastrophic failure. A daily save time
of 00:00 means that no daily save is performed.
It is recommended that the SMDB is cleared before the SRAM is copied to it. When the
SRAM is copied to the SMDB there is no interruption in service. If the SMDB is copied to
the SRAM, the system will be reset to accept the new data.
SMDB (Smart Media card database)
Option Description
S:mm/dd/yy hh:mm Indicates the time the database was saved to the SMDB
CLEAR SMDB Clear SMDB
COPY TO SRAM Copy SMDB to SRAM
SRAM (MP on-board database)
Option Description
S:mm/dd/yy hh:mm Indicates the time the SRAM was last saved
COPY TO SMDB Copy SRAM to SMDB
DAILY SAVE hh:mm The time the SRAM will be saved to the SMDB
A 16 or 32 MB Smart Media card must be installed in order to copy the SRAM to
the SMDB.
DEFAULT DATA
DAILY SAVE 00:00 (no daily save)
ACTION DISPLAY
1. Press Transfer button and enter 815.
Display shows:
CUST DBASE:SMDB
S:12/01/01 00:00
If the Smart Media card is in use, the display shows: CUST DBASE:SMDB
SMART IS BUSY
2. Press Right Soft button to move cursor. CUST DBASE:SMDB
S:12/01/01 00:00