Instructions Getting to know your camera ■ Use this camera in the following order Set up the camera driver Take a picture Insert the USB cable Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.64) Take a picture. (p.15) Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.66) Check the camera’s power Check the camera’s power.
Danger DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. ■ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre. ■ Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. ■ Leaking, overheating, or burst battery could result in fire or injury. •Use battery with the correct specification for the camera. •Do not short circuit, heat or dispose of battery in fire. •Do not insert the battery with the polarities reversed. ■ Remove the battery when not planning to use the camera for a long period of time.
Contents ■+ / - button ●Using the LCD monitor to set the camera settings ■How to use the menu ■Mode Set ■Mode ■Size ■Quality / Frame rate ■Metering ■Continuous shot ■Sharpness ■OSD (On Screen Display) information 29 31 32 33 33 34 34 35 35 35 36 PLAY ●Starting play mode 36 37 ■Playing back a movie clip 37 ■Movie clip capture function 37 ■How to capture the movie clip 37 ■On camera movie trimming ■Playing back a recorded voice 38 38 ●LCD monitor indicator ●Using the camera buttons to adjust 38 the camera 3
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. < Included items > Camera case DPOF compatible printer (see p.48) User manual, Product warranty Camera strap Software CD (see p.63) SD memory card / MMC (see p.12) Computer (see p.66) PictBridge compatible printer (see p.
Identification of features Front & Top Shutter button Power button Speaker Flash Self-timer lamp / Auto focus lamp Lens Microphone 《6》
Identification of features Back & Bottom Camera status lamp Zoom W button (Thumbnail) Zoom T button (Digital zoom) M (Mode) button LCD monitor Strap eyelet E (Effects) button + / - button, Delete button AV OUT/ USB 5 function button Tripod socket Play mode button/Printer button 《7》
Identification of features ■ Self-timer lamp Bottom / 5-function button Icon Memory card slot Status Battery holder Blinking Blinking Blinking Description - For the first 7 seconds, the lamp blinks at 1 second intervals. - For the final 3 seconds, the lamp blinks quickly at 0.25second intervals. For the 2 seconds, the lamp blinks quickly at 0.25-second intervals. A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Identification of features ■ Mode icon : Refer to page 14 for more information about the camera mode setting. MODE MOVIE CLIP VOICE RECORDING AUTO PROGRAM PLAY ICON MODE SCENE NIGHT PORTRAIT CHILDREN LANDSCAPE TEXT CLOSE UP ICON MODE SUNSET DAWN BACKLIGHT FIREWORKS BEACH&SNOW ICON - Connecting to a Power Source ■ You should use the rechargeable battery (SLB-0837) supplied with the camera.
Connecting to a Power Source ■ Insert the battery as shown - If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ / -). - When the battery chamber cover is opened, do not press the battery chamber cover by force. This may cause damage to the battery chamber cover. ■ There are 4 indicators for battery condition that are displayed on the LCD monitor.
Instructions on how to use the memory card ● Be sure to format the memory card (see p.54) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ● Turn off the camera power whenever the memory card is being inserted or removed. ● Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Instructions on how to use the memory card INFORMATION ● Don't remove the memory card when the camera status lamp is blinking as this may cause damage to data in the memory card. ■ When using a 256MB MMC memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type. Recorded image size Super Fine 7M 76 ■ The camera can use SD/ SDHC Memory Cards and MMC (Multi Media Cards).
LCD monitor indicator ■ The LCD monitor displays information about the shooting functions and selections. ① No. 4 ⑳ ⑲ ② ⑱ ③ ⑰ Description Icons Page Flash p.22~24 Without Sound p.16 5 Self-timer p.24 6 Macro p.21~22 7 Metering p.35 8 Card inserted indicator - ④ ⑯ 9 Auto focus frame - ⑤ ⑮ ⑭ 10 Camera shake warning p.18 11 Date / Time ⑬ 12 Exposure compensation ⑫ 13 White Balance p.30 14 ISO p.29 ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ [Image & Full Status] No.
Changing the recording mode ■ You can select the desired working mode by the M (mode) button located on the back of the camera and [MODE], [MODE SET] menu. Auto, Program, movie clip, scene (night, portrait, children, landscape, text recognition, close-up, sunset, dawn, backlight, fireworks, beach & snow) camera modes are available. ● Selecting the [MODE] menu 1. Insert the battery (p.10). 2. Insert the memory card (p.10).
Changing the recording mode ● Changing the recording mode : If the [FULL] menu was selected Steps from 1-4 are the same as those for selecting the [MODE] menu. 5. The recording mode of still image selected in the [MODE SET] menu will display. 6. Press the M (Mode) button located on the back of the camera and the mode selection menu will display. 7. To select the Auto, Program, Movie clip or Scene modes, press the Left / Right button.
Starting the recording mode ■ How to use the Movie clip mode( ) A movie clip can be recorded for as long as the available recording time of the memory capacity allows. 1. Select the [FULL] sub menu on the [MODE] menu (p.14). 2. Select the Movie clip mode by pressing the M (Mode) button (p.15). 3. Point the camera towards the subject and compose the image by using the LCD monitor. [MOVIE CLIP mode] 4.
Starting the recording mode ■ How to use the Program mode( ) Selecting the automatic mode will configure the camera with optimal settings and you can manually configure various functions. 1. Select the [FULL] sub menu on the [MODE] menu (p.14). 2. Select the Program mode by pressing the M (Mode) button (p.15). 3. Point the camera towards the subject and compose the image by using the LCD monitor. [PROGRAM mode] 4. Press the shutter button to capture an image.
Starting the recording mode ■ How to use the VOICE RECORDING mode ( ) A voice recording can be recorded for as long as the memory capacity allows. (Max. 1hour) 1. In any mode with the exception of Movie clip mode, select the VOICE RECORDING mode by pressing the Voice recording button twice. 2. Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time allows. The recording time will be displayed on the LCD monitor.
Using the camera buttons to set the camera ■ The recording mode function can be set up by using the camera buttons. ZOOM W / T button ● If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. POWER button ● Used for turning the camera’s power on / off. ● If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 54 for more information about the auto power off function.
ZOOM W / T button ● WIDE Zoom Optical zoom WIDE INFORMATION : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.
Voice recording ( ) / Voice memo ( ) / UP button ■ While the menu is showing, press the UP button to move up the sub menu. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recording or voice memo ( ) button. You can add your voice-over to a stored still image. Refer to page 18 for more information about the voice recording.
Macro ( ) / Down button Flash ( ■ When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. ■ Available focusing method, by recording mode (O : Selectable, X : Not selectable, ∞ : Infinity focus range) Mode Normal Macro Auto macro O O X O X O SCENE Mode Normal Macro Auto macro ) / Left button O O X ■ When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( ) button.
Flash ( ) / Left button INFORMATION ● If you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move until the second flash fires. ● Using the flash frequently will reduce the life of the battery. ● Under normal operating conditions the charging time for the flash is normally less than 4 seconds. If the battery is weak, the charging time will be longer.
Flash ( ) / Left button ● Available flash mode, by recording mode (O : Selectable X : Not selectable) X X O X X X X X X X X X X O X O O X O O X X X X X X X X X X O X X X X X X X X O X X X X O O X X X X X X X X X X O O O O O O O O O O O X O X Self-timer ( ) / Right button ■ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab.
MENU / OK button M (Mode) button ■ MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the followings are selected : MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICE RECORDING mode is selected. ■ You can select the desired recording mode.
M (Mode) button E (Effect) button ● How to use the mode button : In case of [FULL] sub menu and Auto mode ■ It is possible to add special effects to your images by using this button ■ Still image mode : You can select the colour and focus menus. Movie clip mode : You can select the colour and stabilizer menus.
Special Effect : Colour Special Effect : Preset focus frames ■ By using the camera’s digital processor, it is possible to add special effects to your images. 1. Press the E button in the available camera modes. 2. Select the ( ) menu tab by pressing the Left / Right button. Normal [Still image mode] ■ You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. 1. Press the E button in the Program mode. 2.
Special Effect : Preset focus frames ● Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 1. Point the camera towards the subject and compose the image by using the LCD monitor. 2. Press the + / - button. 3. The colour of focus frame turns white. Press the Up / Down / Left / Right button to move the focus frame position. 4. To select the focus frame position, press the + / - button again and you can take a picture.
+ / - button ■ You can use the + / - button to adjust the values for the RGB, ISO, white balance and exposure compensation. Main menu Sub menu RGB R (Red), G (Green), B (Blue) ISO AUTO, 50, 100, 200, 400, 800, 1600 Available camera mode AUTO, DAYLIGHT, CLOUDY, WHITE BALANCE FLUORESCENT H, FLUORESCENT L, TUNGSTEN, CUSTOM. Exposure compensation -2.0 ~ 0.0 ~ +2.0 (0.5EV steps) ■ RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to be captured.
+ / - button ■ White balance : The white balance control allows you to adjust the colours to appear more natural. ● Selecting a White Balance 1. Press the + / - button, and then use the UP and DOWN buttons to select the white balance icon ( ). The white balance menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to set the white balance to the desired value. The value you set wil be displayed on the LCD monitor.
+ / - button ■ Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the + / - button. Using the LCD monitor to set the camera settings ■ You can use the menu on the LCD monitor to set up recording functions. The items indicated by are default settings. Menu tab Main menu Sub menu Auto ● Compensating Exposure 1.
Using the LCD monitor to set the camera settings Menu tab Main menu QUALITY FRAME RATE METERING SHOOTING SHARPNESS OSD INFORMATION Sub menu Camera working mode Page Super Fine Fine Normal - 30 FPS 15 FPS Multi Spot Single Continuous AEB - Soft Normal Vivid - Full Basic LCD Save - p.34 How to use the menu 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode ( ). 2.
Mode Set ■ You can select the desired recording mode. [Auto] [Program] : For shooting basic still image MODE SET : You can still manually configure all Auto Program functions except the aperture value Movie and shutter speed. Night Portrait [Movie] : For taking a movie clip Move: Set:OK [Night] : Use this for shooting still images at night or in other dark conditions. [Portrait] : To take a picture of a person. [Children] : To take a picture of fast moving objects, for example, children.
Size Quality / Frame rate ■ You can select the image size appropriate for your application. Mode Icon Size STILL IMAGE mode 7M 5M 3M 1M 3072X2304 2592X1944 2048X1536 1024X768 MOVIE CLIP mode 640 320 640X480 320X240 ■ You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Metering ■ If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. - Multi : Exposure will be calculated based on an METERING average of the available light in the image Multi Spot area. However, the calculation will be biased towards the centre of the image area. This is suitable for general use. - Spot : Only the rectangular area in the centre of the LCD monitor will be metered for light.
OSD (On Screen Display) information ■ In any mode with the exception of VOICE RECORDING mode, you can check the recording status in the LCD monitor. OSD INFORMATION Full Basic LCD Save ■ Idle mode : If you select the [LCD Save] and the camera isn't operated during the specified time(about 30 SEC.), the camera power will be idle (LCD monitor : OFF, Camera status lamp : Blinking) automatically. - To use the camera again, press any of the camera buttons except the power button.
Starting play mode ● Playing back a movie clip 1. Select the recorded movie clip that you want to play back by using the LEFT / RIGHT button. 2. Press the play & pause button ( ) to play back a movie clip file. - To pause a movie clip file while playing it back, press the play & pause button again. - Pressing the play & pause button again will cause the movie clip file to restart. - To rewind the movie clip while it is playing, press the LEFT button. To fast forward the movie clip, press the RIGHT button.
Starting play mode ● Playing back a recorded voice 1. Select the recorded voice that you want to play back by using the LEFT / RIGHT button. 2. Press the play & pause button ( ) to play back a recorded voice file. - To pause a recorded voice file, while playing it back, press the play & pause button again. - To resume playback of the voice file, press the play & pause button - To rewind the voice file while it is playing, press the LEFT button. To fast forward the voice file, press the RIGHT button.
Thumbnail / Enlargement button ● You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. ● Thumbnail display 1. While an image is displayed full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3. Press the 5 function button to move to a desired image. 4. To view an image separately, press the enlargement button.
Thumbnail / Enlargement button ● Trimming : You can extract part of the image and save it separately. 1. Select an image that you want to enlarge and press the enlargement button. Trimming? 2. Different parts of the image can be viewed by pressing Yes No the 5 function button. Confirm:OK 3. Press the MENU button and a message will be displayed as shown alongside. 4. Select a desired sub menu by pressing the UP / DOWN button and press the OK button.
Play & Pause ( ) / Down button ■ In Play mode, the play & pause/ down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor. - If a still image with a voice memo, a voice file, or a movie clip is playing In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip. During playback : Temporarily stops playback.
Setting up the play back function using the LCD monitor ■ PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button.
Setting up the play back function using the LCD monitor ■ This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu tab Main menu IMAGES AUTO SET Sub menu One Pic All Pics No Yes Size CUSTOM SET Layout Secondary menu Auto PostCard Card 4X6 L 2L Letter A4 A3 Auto Full 1 2 4 8 9 16 Index Menu tab Main menu Page Sub menu Type p.50 p.50 Quality CUSTOM SET Date File Name p.
Starting the slide show ■ Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Select the [Show] sub menu by pressing the UP / SLIDE DOWN button and press the RIGHT button. Show Play 2. Use the Up / Down buttons to select the desired Interval Repeat Play Effect sub menu. Music [Play] selected : The slide show is closed Back: Set:OK after one cycle. [Repeat Play] selected : The slide show is repeated until cancelled. 3.
On Screen Display information ■ You can check shooting information about the displayed image. 1. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. OSD INFORMATION Full Basic OSD Off Rotating an image ■ You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Select a desired sub menu by pressing the UP / DOWN button.
Resize Protecting images ■ Change the resolution (size) of pictures taken. Select the [User Image] to save an image to be the start-up image. The resized image will have a new file name. 1. Select a desired sub menu by pressing the UP / DOWN button and press the OK button.
Deleting images Copy To Card ■ Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image and SKIN image are stored in the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card. ● Deleting images 1.
DPOF DPOF : Index ■ DPOF (Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. ■ The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs. ■ This function is not available for Movie clips and Voice recording files.
DPOF : Print size PictBridge ■ You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. ● Setting the Print Size 1. Select the [Size] menu by pressing the UP / DOWN button and press the RIGHT button. 2. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select] : Selection window for an image to be changed printed size is displayed. - Up / Down / Left / Right : Select an image.
PictBridge : Picture Selection ● Setting the Number of Copies to Print - Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will appear as shown below. ■ If you select [Computer] sub menu in the [USB] setup menu, [Connecting Computer] message will display when you connect the camera to your printer and the connection will not be established. In this case, press the Printer button. [Connecting Printer] message will display and the Easy printing mode will be selected.
PictBridge : Print Setting PictBridge : Print ■ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Use the LEFT and RIGHT buttons to select the [CUSTOM SET] menu tab. 2. Use the UP and DOWN buttons to select the desired submenu value, and then press the RIGHT button. 3. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button.
PictBridge : RESET Setup menu ■ Initialises user-changed configurations. 1. Use the LEFT and RIGHT buttons to select the [RESET] menu tab. 2. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. If [No] is selected : Settings will not be reset. If [Yes] is selected : All print and image settings will be reset. RESET No Yes Move: ※ Default print setting varies depending on the printer manufacturer.
Setup menu Menu tab Main menu Sound USB LCD Video Out Quick View Reset File name Sub menu Off Low Medium High Secondary menu Computer - Printer - - p.55 - Dark - Normal - Bright - NTSC - PAL - Off, 0.5, 1, 3 sec - No - Yes - ※ Menus are subject to change without prior notice. Page - p.55 ■ This function allows the user to select the file naming format.
Auto power off Format ■ This function switches the camera off after a specified period in order to prevent unnecessary battery drainage. [Off] : The power off function will not operate. [1, 3, 5, 10 min] : The power will turn off automatically if not used for the period of time specified. SETUP File Power Off Language Format Date&Time Off 1 min 3 min 5 min 10 min Back: Set:OK INFORMATION ● After replacing the battery, the power off setting will be preserved.
Setting up the Date / Time / Date type ■ You can change the date and time that will be displayed on the captured images and set up the date type. RIGHT button : Selects the year / month / day / hour / minute date type. LEFT button : Moves the cursor to the [Date&Time] main menu if the cursor is at the first item of the date and time setup. In all other cases, the cursor will be shifted to the left of its current position. UP and DOWN buttons : Changes the setting value.
LCD brightness Selecting Video out type ■ You can adjust the LCD brightness. INFORMATION SETUP SOund USB LCD Video Out Quick View Dark Normal Bright Back: Set:OK ● When using a TV as an external monitor, you will need to select the external or AV channel of the TV. ● There will be a digital noise on the external monitor, but it is not a malfunction. ● If the image is not in the centre of the screen, use the TV controls to centre it.
Setting up the Mycam menu Start up sound ■ YYou can set up a start up image, start up sound and shutter sound. Every working mode of camera with the exception of Voice recording mode has the MyCAM menu. The items indicated by are default settings. Menu tab Main menu Start Image Start Sound Shutter Sound Sub menu Off User Image 1 Off Sound 2 Off Sound 2 ■ You can select the sound that is activated whenever the camera is turned on. p.57 p.
Important notes Be sure to observe the following precautions! ■ This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes ■ Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to the camera and is not a malfunction. ■ When images are uploaded or downloaded (when the charger and USB cable are inserted into the cradle (optional) at the same time), the data transfer may be affected by static electricity. In this case, disconnect and re-connect the USB cable before trying the transfer again.
Before contacting a service centre ■ Please check the following The camera doesn’t switch on •There is low battery capacity → Insert fresh batteries. (p.10) •The battery may be inserted incorrectly. → Insert the battery according to the polarity marks (+, -) •The battery is not inserted → Insert the battery and turn on the camera The camera power ceases while in use •The battery are exhausted → Insert charged battery •The Camera is turned off automatically → Turn on the camera power again.
Before contacting a service centre The images don't play back •Incorrect file name (Violation of DCF format) → Do not change the image file name Colour of image is different to the original scene •White balance or effect setting is incorrect → Select appropriate White balance and effect Images are too bright •Exposure is excessive → Reset exposure compensation No image on external monitor •The external monitor has not been connected properly with the camera → Check the connection cables •There are incorrect
Specifications ■ White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom ■ Voice Recording : Voice Recording (Max. 1 hour) Voice Memo in Still Image (Max. 10 sec.) ■ Date Imprinting : Date&Time, Date, Off (user selectable) ■ Shooting - Still Image : ㆍModes : Auto, Program, Scene, Voice Recording ※ 11 Scene (Night, Portrait, Children, Landscape, Close-up, Sunset, Dawn, Backlight, Firework, Beach & Snow, Text) ㆍShooting : Single, Continuous, AEB ㆍSelf-timer : 10 sec., 2 sec.
Software Notes About the software Please ensure that you read the instruction manual carefully before use. •The attached software is a camera driver and image editing software tool for Windows. •Under no circumstances should all or part of either the software or the user manual be reproduced. •Copyrights for software are licensed only for use with a camera. •In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
Setting up the application software ■ To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. ■ You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean 1. The auto run frame will display. Click the [Install] menu in the Auto run frame. 2.
Setting up the application software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. ※ If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was set up successfully.
Starting PC mode •If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". •In this mode, you can download stored images to your PC through the USB cable. •The LCD monitor is always turned off in PC mode. ■ Connecting the camera to a PC 1. In any mode with the exception of Voice Recording mode, press the Menu button. 2. Press the LEFT / RIGHT button and select the [SETUP] menu tab. 3.
Starting PC mode ■ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My Computer] and double click [Removable Disk → DCIM → 100SSCAM]. The image files will then be displayed. 7.
Removing the removable disk ■ Windows 98/98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. ■ Windows 2000/ME/XP (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2.
Removing the USB Driver for Windows 98SE ■ To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn it on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager. Digimax Master ■ You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows except for the Windows 98.
Digimax Master 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, images will be downloaded. ● Image viewer : You can view the stored images. ① ⑤ ⑥ ⑦ ② 5. Click [Next >] button. ③ 6. A window will open as shown alongside.
Digimax Master ● Image edit : You can edit the still image. ● Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ① ① ④ ② ② ③ - Image edit functions are listed below. ① Edit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Adjust] : You can modify image quality. See the [Help] menu. [Retouch] : You can change image or insert effects on the image. See the [Help] menu.
Digimax Master FAQ ■ Movies for viewing on the camera : You can play back a movie on this camera 1. Select a movie for playing back on the camera by pressing the [Add] button. Insert effects and edit the movie. To save the edited movie, press the [Make] button. 2. Select [Movie for camera] video type. 3. Select Camera option, Output location, File name and press the [Make] button. - Frame size : Selecting the width and height of the frame. - Frame rate : Selecting the frame rate per second.
FAQ Case 6 When I open the Device Manager (by clicking Start → (Settings) → Control Panel → (Performance and Maintenance) → System → (Hardware) → Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. → Right-click on the entry with the question (?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera again.
FAQ ● When the DirectX 9.0 or later is not installed → Install the DirectX 9.0 or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive:\ USB Driver\DirectX 9.0] folder and click the DXESETUP.exe file. The DirectX will be installed. Visit the following site for downloading the DirectX.http://www.microsoft.
FCC notice MEMO ■ NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
MEMO 《76》 MEMO
SAMSUNG TECHWIN CO., LTD. SAMSUNG OPTO-ELECTRONICS GmbH OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8222, 8488, 8490 FAX : (82) 31-740-8398 www.samsungcamera.com ZENTRALE, KEINE REPARATUR AM KRONBERGER HANG 6 D-65824 SCHWALBACH/TS, GERMANY TEL : 49 (0) 6196 66 5303 FAX : 49 (0) 6196 66 5366 TECHNISCHE SERVICE HOTLINE : 00800 4526 3727 (nur kostenfrei fur Anrufe aus Deutschland) SAMSUNG OPTO-ELECTRONICS AMERICA, INC.