TFT-LCD MONITOR SMT-1722 / SMT-1922 User Guide
USER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
USER'S MANUAL 19.Damage Requiring Service : Unplug this monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged. b. If liquid has been spilled or objects have fallen into the monitor. c. If the monitor has been exposed to rain or water. d. If the monitor does not operate normally by following the operating instructions.
USER'S MANUAL Contents Important Safety Instructions .................................................................... 2 Unpacking ................................................................................................. 5 Viewing the Control Panels ....................................................................... 5 Front View....................................................................................................................... 5 Rear & Left Side View.......................
USER'S MANUAL Unpacking Remove the package cover and place the product on a flat and secure surface or in the installation location. Check whether all the following devices and accessories are included with the main system. TFT-LCD MONITOR REMOTE & BATTERIES VGA SIGNAL CABLE POWER CORD USER’S MANUAL USER’S MANUAL CD Viewing the Control Panels Front View / PIP Increases the level of active function, and selects OSD menu. Also, Activates PIP function in the VGA Mode.
USER'S MANUAL Rear & Left Side View Left Side View Rear View Rear View Left Side View POWER AC power input. AUDIO-B Audio-B input : Right (RED), Left (White) VIDEO-A IN Composite signal input for VIDEO A. AUDIO-A/S-VIDEO Audio-A (S-Video) input : Right (RED), Left (White) VIDEO-A OUT Video looping output for VIDEO A. VIDEO-B IN Composite signal input for VIDEO B. VIDEO-B OUT Video looping output for VIDEO B. S-VIDEO IN Y/C separated signal input. S-VIDEO OUT Y/C separated signal looping output.
USER'S MANUAL Remote Controller POWER Turns the Power On or Off. There will be a few seconds delay before display appears. Number button Changes the SYSTEM ID for remote controller. With the SYSTEM ID button pressed, entered the desired NUMBER by pressing the corresponding button(0~9) to set up the Remote Controller ID ID RESET Resets 01(default value) for the remote control ID. VOLUME +, Adjusts the audio volume. MUTE Press to mute the sound temporarily. Displayed on the bottom left of the screen.
USER'S MANUAL Connecting to External Devices. The product can be connected to an external device such as Camera, DVR,VCR, External Monitor, etc.
USER'S MANUAL OSD Menu Configurations Picture Menu Mode : Dynamic, Standard, Movie No Signal Display Picture When there is no connection at the VGA and Video input, the On Screen Display will show this message. Mode Contrast Brightness Sharpness Color Tint Color Tone Backlight More No Signal
USER'S MANUAL 4. Press the / and the ENTER button to adjust the setting value and save. 5. Press the MENU button to exit. In VGA Mode, Only "Contrast" and "Brightness" can be adjusted.
USER'S MANUAL • Digital NR : Off/Low/Medium/High/Auto If the signal received by the monitor is weak,you can activate this feature to reduce any noisy signal that may appear on the screen. Reset You can return to the factory defaults picture settings.
USER'S MANUAL 4. Press the / and ENTER button to select the setting you want. 5. Press the MENU button to exit. Equalizer Sound Mode : Custom Equalizer Audio for VGA Mode : Off Reset This function is only available in VGA mode. Reset Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults. Move Enter Sound Return Mode : Custom Equalizer Audio for VGA Mode : Off Reset Equalizer Move Balance 100Hz 300Hz 1kHz 3kHz 10kHz Move Adjust Return 1.
USER'S MANUAL Blue Screen/Melody Setup Language Blue Screen Melody PC Energy Saving PIP System ID No Signal OSD Setup Language Blue Screen Melody PC Energy Saving PIP System ID No Signal OSD : English : Off On : : Off : English : Off : Medium : :1 : On Move Move Enter Move : English : Off : Off : Low Medium High Return 1. Press the MENU and / button to select the Setup menu. 2. Press the ENTER or button. 3. Press the / and ENTER button to select the Blue Screen or Melody menu. 4.
USER'S MANUAL Press the PIP button on the remote control repeatedly to activate or deactivate the "PIP". 5. Press the / button to select "Source", then press ENTER button. Select a source of the sub picture by pressing the / button and press the ENTER button. 6. Press the / button to select Size menu, then press the ENTER button . 7. Press the / and ENTER button to select the size you want ( ). 8. Press the / button to select "Position", then press the ENTER button.
USER'S MANUAL PC Lock(Coarse and Fine Tuning of the Image) •TheImage purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.
USER'S MANUAL System ID Source List Video A Video B S-Video VGA Setup Language Blue Screen Melody PC Energy Saving PIP System ID No Signal OSD Move : : : 0 1 2 3 4 5 6 7 8 9 : : : Enter :–––– :–––– :–––– :–––– Move Enter Return 1. Press the MENU and / button to select Input menu. 2. Press the ENTER and button. 3. Press the / and ENTER button to select the Source List. 4. Press the / and ENTER button to select desired source. 5. Press the MENU button to exit. Return 1.
USER'S MANUAL Specifications Model Name SMT-1722 Inch Display Type Resolution (HxV) Brightness(cd/m2) Contrast Response Time Viewing Angle Degree Panel Active Display Area Pixel Pitch(mm) Scan System CVBS Resolution A/D bits Scanning frequency Color System Screen Mode 3D Comb Filter Noise Reduction PIP/PBP Freeze Under Scan Composite Picture Video S-Video VGA Audio OSD HAS Stand Dimensions(WxDxH) Weight Electric Performance Operating condition SMT-1922 World Wide NTSC/PAL System Sales Area Bro
AB68-00747A