Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site AUSTRIA BELGIUM 0800-SAMSUNG (726-7864) 0032 (0)2 201 24 18 844 000 844 www.samsung.com/at www.samsung.com/be www.samsung.com/cz CZECH REPUBLIC Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4 DENMARK EIRE FINLAND 70 70 19 70 0818 717 100 030-6227 515 www.samsung.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.(See back cover for more information) Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn".
English Contents Connecting and Preparing Your TV List of Parts......................................................... 2 Installing the Stand.............................................. 2 Installing the Wall Mount Kit................................ 2 Viewing the Control Panel................................... 3 Viewing the Connection Panel............................ 4 Viewing the Remote Control................................ 6 Installing Batteries in the Remote Control...........
List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. M4XL16 Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom Owner’s Instructions ➣ ➣ Stand Screw X 4 Stand Warranty card Cleaning Cloth Safety Guide Warranty card / Safety Guide (Not available in all locations) The stand and stand screw may not be included depending on the model. Installing the Stand 2 1 1. Connect your LCD TV and the stand.
Viewing the Control Panel Side Panel buttons 1 2 3 4 5 6 5 The product colour and shape may vary depending on the model. 1 SOURCE 5 Speakers Toggles between all the available input 6 (Power) sources (TV, Ext., AV, Component, PC, HDMI1, Press to turn the TV on and off. HDMI2). Power Indicator In the on-screen menu, use this button as Blinks and turns off when the power is on and you use the ENTER button on the remote lights up in stand-by mode. control.
Viewing the Connection Panel 1 2 3 4 5 6 Power Input 8 7 9 ➣ The product colour and shape may vary depending on the model. ➣ ➣ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. 1 PC IN [PC] / [AUDIO] - Connect to the video and audio output jack on your PC.
➣ What is HDMI? - “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio. - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
Viewing the Remote Control 1 Television Standby button 2 Selects the TV mode directly 3 Number buttons for direct channel access 4 One/Two-digit channel selection 5 + : Volume increase : Volume decrease 6 Temporary sound switch-off 7 Use to quickly select frequently used functions. 8 Use to see information on the current broadcast 9 Colour buttons : Use these buttons in the Channel list, etc.
Installing Batteries in the Remote Control 1. 2. 3. ➣ Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. ➣ Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. ➣ If the remote control doesn’t work, check the following: 1. Is the TV power on? 2.
Viewing the Menus 1. W ith the power on, press the MENU button. The main menu appears on the screen. The menu’ s left side has icons: Picture, Sound, Channel, Setup, Input. 2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon’s submenu. 3. TV Picture Mode : Standard Backlight 7 Contrast 95 Brightness 45 TOOLS Sharpness 50 Colour 50 Tint G 50 R 50 Picture Options Reset : OK Press the EXIT button to exit.
Plug & Play When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available. 1. Press the POWER button on the remote control. The message "Start Plug & Play." is displayed with "OK" selected. 2. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. 3. Plug & Play Start Plug & Play. OK Enter Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.
If you want to reset this feature... 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup" then press the ENTER button. TV 2. Press the ENTER button again, to select "Plug & Play". For further details on setting up options, refer to the page 9. ➣ The “Plug & Play” feature is only available in the TV mode.
Storing Channels Manually You can store television channels, including those received via cable networks. When storing channels manually, you can choose: ♦ Whether or not to store each of the channels found. ♦ The programme number of each stored channel which you wish to identify. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER button. 3.
Adding / Locking Channels Using the Channel Manager, you can conveniently lock or add channels. Channel TV Country : Belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER button. ♦ Adding channels Using the Channel List, you can add channels. 3.
Sorting the Stored Channels This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Sort", then press the ENTER button. 3. Select the channel number that you wish to change by pressing the ▲ or ▼ button. Press the ENTER button.
Fine Tuning Channel Reception Use fine tuning to manually adjust a particular channel for optimal reception. 1. Use the number buttons to directly select the channel that you want to fine tune. TV 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 3. 4. 5.
Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Press the ENTER 3. Press the ▲ or ▼ button to select the desired picture effect. Press the ENTER button. 4. Press the EXIT button to exit. TV button again, to select "Mode".
Adjusting the Custom Picture Your set has several settings which allow you to control picture quality. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 15) 2. Press the ▲ or ▼ button to select a particular item. Press the ENTER button. 3. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button. 4. Press the EXIT button to exit.
Resetting the Picture Settings to the Factory Defaults You can return to the factory defaults picture settings. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3 on page 15. 2. Press the ▲ or ▼ button to select "Reset", then press the ENTER button. 3. Press the ▲ or ▼ button to select "OK" or "Cancel". Press the ENTER button. 4. Press the EXIT button to exit.
Changing the Picture Options 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button. 3. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 4. When you are satisfied with your setting, press the ENTER button. 5. Press the EXIT button to exit.
♦ Screen Mode: 16:9/ Wide Zoom/Zoom/4:3 When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. ♦ 16:9: Sets the picture to 16:9 wide mode ♦ Wide Zoom: Magnify the size of the picture more than 4:3. ♦ Zoom: Magnify the size of the picture vertically on screen.
Viewing the Picture In Picture (PIP) You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. 1. 2. 3. 4. 5. ➣ Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the button. ENTER Press the ▲ or ▼ button to select "PIP", then press the button.
Sound Features 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. TV Sound Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off TV Speaker : On Sound Select : Main 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 3. When you are satisfied with your setting, press the ENTER button. Move 4. Press the EXIT button to exit.
♦ Auto Volume: Off/On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. ♦ TV Speaker: Off/On If you want to hear the sound through separate speakers, cancel the internal amplifier.
Setting and Displaying the Current Time You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Time", then press the ENTER button. 3. Press the ENTER 4. 5.
Switching the Television On and Off Automatically 1. Press the MENU button to display the menu. Setup TV Plug & Play Press the ▲ or ▼ button to select "Setup", then press the Language : English Time ENTER button. Melody : Off Energy Saving : Off 2. Press the ▲ or ▼ button to select "Time", then press the PIP ENTER button. 3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2", "Timer 3", then press the ENTER button. Three different On/Off Timer Settings can be made.
Melody / Energy Saving 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. TV Setup Plug & Play Language : English Time Melody : Off Energy Saving : Off PIP 3. When you are satisfied with your setting, press the ENTER button. Move 4. Press the EXIT button to exit.
Selecting the Source You can select among external sources connected to your TV’s input jacks. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Input", then press the ENTER button. 2. Press the ENTER button again, to select "Source List". Available signal sources: TV, Ext., AV, Component, PC, HDMI1, HDMI2. You can choose only those external devices that are connected to the TV. Select the required device by pressing the ▲ or ▼ button. Press the ENTER button. 3.
Editing the Input Source Names Name the device connected to the input jacks to make your input source selection easier. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Input", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button. 3. Press the ▲ or ▼ button to select the device that you wish to edit. Press the ENTER button. Press the ▲ or ▼ button to select the required device. Press the ENTER button. 4. 5.
Setting up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. 2. First, click on "Control Panel" on the Windows start menu.
Setting up the TV with your PC Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 3. When you are satisfied with your setting, press the ENTER button. 4. Press the EXIT button to exit.
Teletext Feature Most television stations provide written information services via Teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons. For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. 1.
The teletext pages are organized according to six categories: Part A B C D E F Contents Selected page number. Broadcasting station identity. Current page number or search status. Date and time. Text. Status information. FASTEXT information. Teletext information is often divided between several pages displayed in sequence, which can be accessed by: ♦ Entering the page number ♦ Selecting a title in a list ♦ Selecting a coloured heading (FASTEXT system) Press the TV button to exit from the teletext display.
경고 주의 Securing the TV to the Wall Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure 경고 your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, 주의 causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. To avoid the TV from falling: 1.
Troubleshooting: Before Contacting Service Personnel No sound or picture. Check that the mains lead has been connected to a wall socket. Check that you have pressed the button on your set. Check the picture contrast and brightness settings. Check the volume. Normal picture but no Check the volume. sound. Check whether the MUTE button has been pressed on the remote control. Check if "TV Speaker" is on. Screen is black and power On your computer check; Power, Signal Cable.
Technical and Environmental Specifications Model Name Screen Size (Diagonal) PC Resolution Sound Output Dimensions (WxDxH) Body With stand Weight With stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right) LE26A340 26 inch 1360 X 768 @ 60 Hz 5W x 2 744 X 80 X 447 mm 744 X 232 X 507 mm 11 kg 10 °C to 40 °C (50 °F to 104 °F) 10 % to 80 %, non-condensing -20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing 0˚ Desig