User Manual

English-51
Coarse and Fine Tuning of the Image
The purpose of picture quality adjustment is to remove or reduce
picture noise. If the noise is not removed by Fine-tuning alone, then
adjust the frequency as best as possible (coarse) and Fine-tune again.
After the noise has been reduced, re-adjust the picture so that it is
aligned on the center of screen.
Press the PC button under the remote’s cover to select the PC mode.
1 Press the MENU button.
Result: The main menu is displayed.
2 Press the or button to select Setup .
Press the
ENTER button.
Result
: The options available in the Setup group are displayed.
3 Press the or button to select PC .
Press the
ENTER button.
Result
: The options available in the PC menu are displayed.
4 Press the ENTER button again.
Result: The
Image Lock menu is selected.
5 Press the or button to select Coarse or Fine .
Press the
ENTER button.
Result
: The horizontal bar is displayed.
6 Press the or button to adjust the screen quality.
Press the
ENTER button.
Vertical stripes may appear or the picture may become blurry.
7 When you are satisfied with the settings, press the MENU button
to return to the previous menu or press the
EXIT button to return to
normal viewing.
BN68-00926A-00Eng.qxd 6/8/05 2:29 PM Page 51