LCD TV LE32S6 LE37S6 LE40S6 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
English Contents CONNECTING AND PREPARING YOUR TV List of Parts ......................................................................................................... Installing the Stand ......................................................................................... Installing the Wall Mount Kit ................................................................. Viewing the Control Panel ............................................................................ Viewing the Connection Panel ..
List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. M4 X L16 Remote Control & Batteries (AAA x 2) Power Cord Owner’s Instructions Cover-Bottom Stand Screw X 4 Warranty card Stand Safety Guide Cleaning Cloth Registration Cards Warranty card / Safety Guide / Registration Cards (Not available in all locations) The stand and stand screw may not be included depending on the model. Installing the Stand <2> <3> 1.
Viewing the Control Panel The product colour and shape may vary depending on the model. SOURCE Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI, DTV). In the on-screen menu, use this button as you use the ENTER/OK button on the remote control. MENU Press to see an on-screen menu of your TV’s features. In case of DTV mode, the DTV menu appears. Speakers Remote Control Sensor Aim the remote control towards this spot on the TV.
Viewing the Connection Panel Side Panel Jacks] [Rear Panel Jacks] (32 inch/37 inch/40 inch) (27 inch model does not have the side panel jacks.) [Rear Panel Jacks] (27 inch) Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.
Connecting HDMI/DVI - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs). - No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI? - “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels). - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
Viewing the Remote Control Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR) (Refer to page 30~34) Television Standby button Toggle between the TV and Radio channel P : Next channel P : Previous channel Exit the OSD Number buttons for direct channel access Control the cursor in the menu One/Two-digit channel selection Use to see information on the current broadcast It display "Channel Manager" on the screen.
Switching On and Off The mains lead is attached to the rear of your set. 1. Plug the mains lead into an appropriate socket. 2. Press the The standby indicator lights up on the front of the set. button on the front of the set. You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on. The programme that you were watching last is reselected automatically. 3.
- Storing Channels Automatically - Storing Channels Manually Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER/OK button. 2.
Setting the Channel Manager Set the channels according to your preference. You can easily delete, add, or lock the channel you want. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER/OK button. 2. Press the or button to select "Channel Manager", then press the ENTER/OK button. 3. Press the ENTER/OK button again, to select "Channel Manager". 4. Press the 5.
Sorting the Stored Channels You can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically stored. Give easily remembered numbers to the channels that you watch most often. 1. Press the MENU button to display the menu. Press the to select "Channel", then press the ENTER/OK button. 2. Press the 3. Select channel number that you wish to change by pressing the or button repeatedly. Press the ENTER/OK button. 4.
LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER/OK button. 2. Press the or button to select "LNA", then press the ENTER/OK button. 3. Press the or button to select "On" or "Off". Press the ENTER/OK button. 4. Press the EXIT button to exit.
Resetting the Picture Settings to the Factory Defaults You can return to the factory defaults picture settings. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3 on page 11. 2. Press the 3. or button to select "Reset", then press the ENTER/OK button. Press the EXIT button to exit. The "Reset" will be set for each picture mode. Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1.
DNIe Demo (Digital Natural Image engine) Samsung’s new technology brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode to On. 1. Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER/OK button. 2.
PIP Settings O: PIP operates, X: PIP doesn’t operate Main Sub TV Ext.1 Ext.2 AV S-Video Component PC HDMI DTV TV X X X X X X O O X Ext.1 X X X X X X O O X Ext.2 X X X X X X O O X AV X X X X X X O O X S-Video X X X X X X X O X Component X X X X X X X O X PC X X X X X X X X X HDMI O O O O O O X X X DTV X X X X X X X X X Changing the Sound Standard You can select the type of the special sound effect to be used when watching a given broadcast. 1. Press the MENU button to display the menu.
Setting the TruSurround XT (SRS TSXT) TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1. Press the MENU button to display the menu. Press the select “Sound”, then press the ENTER/OK button. 2.
Resetting the Sound Settings to the Factory Defaults If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults. 1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER/OK button. 2. Press the 3. Press the EXIT button to exit. or button to select "Reset", then press the ENTER/OK button.
4. Press the or button to adjust "Hour", then press the button to move to the next step. Set other items using the same method as above. When finished, press the ENTER/OK button to return. 5. Press the 6. Press the or button to adjust "Hour", then press the button to move to the next step. Set other items using the same method as above. When finished, press the ENTER/OK button to return. 7. or button to select "Off Timer", then press the ENTER/OK button. Press the EXIT button to exit.
Using the Energy Saving Feature This function adjusts the brightness of the TV so as to reduce power consumption. When you watching TV at night, set the "Energy Saving " mode option to "High" so as to reduce the dazzling of your eyes as well as the power consumption. 1. Press the MENU button to display the on-screen menu. Press the or button to select "Setup", then press the ENTER/OK button. 2. Press the 3. Select the required option (Off, Low, Medium, High) by pressing the ENTER/OK button.
Previewing the DTV Menu System To help you navigate around the on-screen menu system and adjust the various settings available, refer to the following illustration. Available in the Digital TV mode. Press the D.MENU button.
Basic Functions 1. Display Screen Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first. After the television channels have been programmed, you will see the following picture (banner) each time you switch channels: Channel Number Signal Status Program Information The number of soundtrack in current channel Detailed program information First you will see the banner described above.
5. Service List • Press the CH MGR button while you are viewing a program. • Select list by pressing the TV/RADIO button. behind the channel name symbolizes scrambled channel, The icon and the icon behind the channel name symbolizes parental locked channel. • Select the channel by pressing the / and press the P down pages on the lists. • Press the ENTER/OK button to watch that channel. 6.
Operating the DTV Menu Main Menu After installing your antenna system and TV with appropriate connectors. • Plug in the AC main power and switch on the TV. • Press the D.MENU button to bring up the main menu. The following on-screen display will appear: The sub menu topics will be displayed. For the sub-menus "Installation", "Channel Organization" and "Parental Lock", you need the PIN Code. 1.
1.3 Manual Scanning To tune-in new channels and weak signals, the TV has been provided with the option “Manual Scanning” where the channel data can be entered by the user. After selecting the “Manual Scanning” from the Installation Menu, the following screen will be displayed: • Select the Channel Number. You can select the specified channel you want to find. The followings are defined as a default, but optionally you can choose it. Signal Status bar shows you if it is valid.
2.1 Delete Frequency • Select the desired frequency list you want to delete by pressing the RED button. • Press the ENTER/OK button for confirmation. This feature doesn’t delete frequency itself but deletes the list of channels registered for frequency. 2.2 Delete Channel • Select the desired channel you want to delete by pressing the RED button. • Press the ENTER/OK button for confirmation. 2.
3. Parental Lock This “Parental Lock” feature sets viewing restrictions and prevents unauthorized access to your TV through the PIN (Personal Identification Number), which is a 4-digit number. (The factory preset PIN Code : 0000) On selecting this menu, you will have three options: to set lock for any desired channel and to change your PIN Code and to Set Modem Lock. • Enter the PIN Code. If you have not entered your own PIN Code then the PIN Code 0000 applies, which was set at the factory. 3.
4. System Setup This option enables you to change the factory preset system settings as per your requirements. 4.1 Language Selection The “Language Selection” option allows the user to select the desired language of the OSD, Soundtrack, Teletext, and EPG. • To accommodate user from different regions speaking different languages, OSD languages are available 5 languages.
4.4 System Information If you have to contact your service provider or a service center they might ask for information available from this menu.Place the cursor on this sub menu and press the ENTER/OK button. The following will be the on-screen display. 4.5 Software Upgrade You can download and upgrade the system software of the TV through a specific channel through a specific channel designated by the broadcaster. The broadcaster will provide you with more information about that.
Teletext Decoder Most set channels carry " teletext ", pages of written information that provide information such as: Television programme times. News bulletins and Weather forecasts. Sports results. Subtitles for the hard of hearing. The teletext pages are organized according to six categories: Contents Part A Selected page number. B Broadcasting station identity. C Current page number or search status. D Date and time. E Text. F Status information.
Selecting a Specific Teletext Page Press the number buttons on the remote control to enter the page number directly: 1. Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. 2. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the PIP ( ) . Press the PIP ( ) button again to resume. 3. Using the various display options: To display... Press the...
Setting Up Your Remote Control After it has been set up properly, your remote control can operate in five different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes. Setting Up the Remote to Operate Your VCR 1. Turn off your VCR. 2.
Setting Up the Remote to Operate Your DVD 1. Turn off your DVD. 2. Press the DVD button on your TV’s remote control. 3. Press the SET button on your TV’s remote control. 4. Using the number buttons on your remote control, enter three digits of the DVD code listed on page 33~34 of this manual for your brand of DVD. Make sure you enter three digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try the first one.) 5. Press the POWER button on the remote control.
Remote Control Codes VCR Brand Code Brand SAMSUNG 000 001 002 003 004 005 077 078 079 MONTGOMERY WARD Code 020 ADMIRAL 020 MTC 002 025 AIWA 025 MULTITECH 002 005 025 038 AKAI 004 027 032 NEC 007 008 018 026 037 062 064 AUDIO DYNAMICS 007 026 OPTIMUS 020 BELL&HOWELL 018 ORION 073 074 075 076 BROKSONIC 022 PANASONIC 021 056 071 072 CANDLE 002 003 006 008 015 055 PENTAX 019 041 075 CANON 021 056 PENTEX RESEARCH+ 008 CITIZEN 002 003 006 008 015 055 PHILCO 021 056 059 C
CABLE BOX Brand Code Brand Code SAMSUNG 000 001 002 003 004 005 006 007 REGENCY 015 023 GI 041 SA 042 043 HAMLIN 003 024 031 SCIENTIFIC ATLAN 042 043 HITACHI 025 030 SPRUCER 022 JERROLD 038 039 STARGATE 2000 036 MACOM 025 030 SYLVANIA 016 MAGNAVOX 019 023 028 TEXSCAN 016 OAK 026 TOCOM 032 PANASONIC 003 022 027 037 044 UNIVERSAL 033 034 PHILIPS 019 021 023 028 VIEWSTAR 019 021 023 028 PIONEER 004 018 020 044 WARNER AMEX 046 RCA 014 022 040 ZENITH 017 029 035
DVD Brand Code Brand Code PANASONIC 024 034 124 134 136 137 138 THOMSON 145 PHILIPS 036 076 TOSHIBA 028 062 076 ROTEL 117 118 TECHNICS 139 RIO 120 TVIEW 072 RCA 023 035 074 075 131 132 TOKAI 073 RAITE 073 TEAC 096 ROWA 038 TECHWOOD 097 SAMPO 104 TREDEX 098 099 101 SONY 026 029 126 127 128 129 130 141 URBAN CONCEPTS 076 SHERWOOD 039 041 VENTURER 075 SVA 042 VOCOPRO 102 SYLVANIA 043 093 YAMAHA 032 063 SHARP 140 YAMAKAWA 040 073 SANSUI 062 XWAVE 103 S
Setting up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. First, click on "Control Panel" on the Windows start menu. 2.
Setting the PC Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1. Preset: Press the SOURCE button to select PC mode. 2. Press the MENU button to display the menu.
Using the Anti-Theft Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use. 1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). Cable Figure 2 2.
Technical and Environmental Specifications Model Name LE32S6 LE37S6 LE40S6 Screen Size (Diagonal) 32 inch 37 inch 40 inch Power Consumption 152 W 170 W 190 W 1360 x 768 @ 60 Hz 1360 x 768 @ 60 Hz 1360 x 768 @ 60 Hz 10 W X 2 10 W X 2 10 W X 2 893 x 82 x 544 mm 893 x 249 x 615 mm 1027 × 94 × 626 mm 1027 × 330 × 699 mm 1101 x 95 x 661 mm 1101 x 330 x 733 mm 13.9 kg 22.5 kg 23.
This page is intentionally left blank. CO79.12258B.11.M13/joec!!!4: 3117.21.
Indice CONEXIÓN Y CONFIGURACIÓN DEL TELEVISOR USO DE LA FUNCIÓN DE DTV 2 2 2 3 4 6 6 7 7 7 Previsualización del sistema de menús del DTV .................................. Funciones básicas ............................................................................................ 1. Pantalla de visualización........................................................................... 2. Control del volumen .................................................................................. 3.
Lista de componentes Asegúrese de que los siguientes elementos se incluyan con el televisor de pantalla LCD. Si falta alguno, póngase en contacto con su distribuidor. M4 X L16 Mando a distancia + pilas (2x AAA) Cable de alimentación Manual de instrucciones Cubierta - inferior 4 tornillos estándar Tarjeta de garantía Soporte Guía de seguridad Paño de limpieza Tarjetas de registro Tarjeta de garantía / Guía de seguridad / Tarjetas de registro (no esta disponible en todas las localidades).
Visualización del Panel de control El color y la forma del producto pueden variar según el modelo. SOURCE Cambia entre todas las fuentes de entrada disponibles (TV, Ext.1, Ext.2, AV, S-Vídeo, Componente, PC, HDMI, DTV). En el menú de la pantalla, use este botón del mismo modo que el botón ENTER/OK del mando a distancia. MENU Púlselo para ver en pantalla un menú de las características del televisor. En el modo DTV, aparece el menú DTV.
Visualización del Panel de conexión [Tomas del panel lateral] [Tomas del panel posterior] (32pulg./ 37pulg. /40pulg.) (El modelo 27 pulg. no tiene tomas en el panel lateral.) Entrada de alimentación [Tomas del panel posterior] (27 pulg.) Cada vez que conecte un dispositivo externo al televisor, compruebe que la unidad esté desconectada de la alimentación. Cuando conecte un terminal externo, debe hacer coincidir los colores del terminal de conexión y del cable.
Conexión de HDMI/DVI - Admite conexiones entre dispositivos de AV con conexión HDMI (receptores de televisión digital, reproductores de DVD, receptores de AV y televisores digitales). - No se necesita conexión de audio adicional para una conexión de HDMI a HDMI. ¿Qué es HDMI? - “La interfaz multimedia de alta definición” (HDMI) permite la transmisión de los datos de vídeo digital de alta definición y varios canales de sonido digital (5.1 canales).
Visualización del mando a distancia Selecciona un dispositivo de destino que controlar con el mando a distancia Samsung (TV, DVD, STB, CABLE, VCR). (Consulte la página 30~34.) Botón de suspensión del televisor Botón numéricos para elegir un canal directamente Selección de canal de uno/dos dígitos Muestra el “Gestor de Canales” en la pantalla.
Encendido y apagado El cable de alimentación se encuentra en la parte posterior de la unidad. 1. Conecte el cordón eléctrico en un enchufe adecuado. 2. Pulse el botón Se enciende el indicador de modo en espera de la parte frontal del equipo. de la parte frontal del aparato. También puede pulsar el botón POWER o el botón TV/DTV del mando a distancia para encender el televisor. El programa que estaba viendo por última vez se vuelve a seleccionar de forma automática. 3.
- Memorización automática de canales - Memorización manual de canales Memorización automática de canales Puede explorar los rangos de frecuencia disponibles (la disponibilidad varía en función del país). Los números de programa adjudicados automáticamente puede que no se correspondan con los números de programa reales o deseados. No obstante, puede ordenar los números manualmente y borrar los canales que no desea ver. 1. Pulse el botón MENU para ver el menú.
Configuración del Gestor de Canales Puede configurar los canales como prefiera. Puede suprimir, añadir o bloquear fácilmente el canal que desee. 1. Pulse el botón MENU para ver el menú. Pulse los botones o para seleccionar “Canal” y pulse el botón ENTER/OK. 2. Pulse los botones ENTER/OK. 3. Pulse el botón ENTER/OK para seleccionar “Gestor de Canales”. 4. Pulse el botón 5. Pulse los botones o para seleccionar el canal no deseado y pulse el botón ENTER/OK para cancelar. 6.
Orden de los canales memorizados Puede intercambiar los números de dos canales para: Modificar el orden numérico en que los canales se han memorizado automáticamente. Asignar números fáciles de recordar a los canales que ve con más frecuencia. 1. Pulse el botón MENU para ver el menú. Pulse los botones o para seleccionar “Canal” y pulse el botón ENTER/OK. 2. Pulse los botones 3. Seleccione el número del canal que desea cambiar pulsando varias veces los botones o . Pulse el botón ENTER/OK. 4.
LNA (Low Noise Amplifier - Amplificador de ruido bajo) Si el TV funciona en una zona de señal débil, la función LNA puede mejorar la recepción (un preamplificador de nivel bajo de ruido aumenta la señal de entrada). 1. Pulse el botón MENU para ver el menú. Pulse los botones o para seleccionar “Canal” y pulse el botón ENTER/OK. 2. Pulse los botones o 3. Pulse el botón seleccionar “Activado” o “Desactivado”. Pulse el botón ENTER/OK. 4. Pulse el botón EXIT para salir.
Reajuste de los valores de la imagen a los valores predefinidos de fábrica Puede volver a los ajustes de imagen predefinidos de fábrica. 1. Para seleccionar el efecto de imagen deseado, siga las instrucciones 1 a 3 de “Cambio de la imagen estándar” de la página Reducción de ruido digital 11. 2. Pulse los botones 3. o para seleccionar “Restablecer” y pulse el botón ENTER/OK. Pulse el botón EXIT para salir. La función “Restablecer” afectará a cada modo de imagen.
DNIe Demo (motor digital de imágenes naturales) La nueva tecnología de Samsung le ofrece imágenes más detalladas con mejoras en contraste y blancos. Un nuevo algoritmo de compensación de imagen proporciona a los usuarios una imagen más brillante y más clara. La tecnología DNIe adaptará todas las señales a su vista. Puede ver cómo DNIe mejora la imagen activando el modo DNIe Demo. 1. Pulse el botón MENU para ver el menú. Pulse los botones o para seleccionar “Imagen” y pulse el botón ENTER/OK. 2.
Configuración de PIP (O: PIP está activado, X: PIP está desactivado) Principal Secundaria TV Ext.1 Ext.2 AV S-Video Component PC HDMI DTV TV X X X X X X O O X Ext.1 X X X X X X O O X Ext.2 X X X X X X O O X AV X X X X X X O O X S-Video X X X X X X X O X Component X X X X X X X O X PC X X X X X X X X X HDMI O O O O O O X X X DTV X X X X X X X X X Cambio del estándar de sonido Puede seleccionar un tipo de efecto de sonido especial que se usará cuando se visualice una emisión concreta. 1.
Configuración de TruSurround XT (SRS TSXT) TruSurround XT es una tecnología patentada de SRS que resuelve el problema de la reproducción de contenidos multicanal 5.1 con dos altavoces. TruSurround XT proporciona una convincente experiencia de sonido surround virtual a través de cualquier sistema de reproducción con dos altavoces, como los propios altavoces internos del televisor. Es totalmente compatible con todos los formatos multicanal. 1. 2. 3. 4. Pulse el botón MENU para ver el menú.
Reajuste de valores de sonido a los valores predefinidos de fábrica Si Modo Juego está activado, la función de restablecer el sonido se activa. Si, tras configurar el ecualizador selecciona la función Reset (Restablecer), se restauran los parámetros de fábrica de la configuración del ecualizador. 1. Pulse el botón MENU para ver el menú. Pulse los botones o para seleccionar “Sonido” y pulse el botón ENTER/OK. 2. Pulse los botones 3. Pulse el botón EXIT para salir.
4. Pulse los botones o para ajustar “Hora” y pulse el botón para ir al paso siguiente. Ajuste otras opciones utilizando el mismo método que se indica anteriormente. Cuando haya terminado, pulse el botón ENTER/OK para volver. 5. Pulse los botones 6. Pulse los botones o para ajustar “Hora” y pulse el botón para ir al paso siguiente. Ajuste otras opciones utilizando el mismo método que se indica anteriormente. Cuando haya terminado, pulse el botón ENTER/OK para volver. 7. o para seleccionar “Temp.
Uso de la función de ahorro de energía Esta función ajusta el brillo del televisor, lo cual reduce el consumo de energía. Si desea ver la televisión por la noche, ajuste la opción del modo “Ahorro energía” en “Alto” sus ojos se lo agradecerán y, además, reducirá el consumo de energía. 1. Pulse el botón MENU para ver el menú en pantalla. Pulse los botones seleccionar “Configuración” y pulse el botón ENTER/OK. o o para 2. Pulse los botones 3.
Previsualización del sistema de menús del DTV Para desplazarse por el sistema de menús en pantalla y para ajustar las configuraciones disponibles, consulte la ilustración siguiente. Disponible en el modo de televisión digital. Pulse el botón D.MENU. Instalación Selec.
Funciones básicas 1. Pantalla de visualización Antes de poder ver el programa de televisión se ha de llevar a cabo la instalación. Por tanto, al principio sólo se verán imágenes de menú. Una vez programados los canales de televisión, se verá la siguiente imagen (banda) cada vez que se cambie de canal: Número de canal Estado de la señal Información del programa Número de la pista sonora del canal actual Información detallada sobre el programa En primer lugar verá la banda descrita arriba.
5. Lista de servicios • Pulse el botón CH MGR mientras está viendo un programa. • Seleccione la lista pulsando el botón TV/RADIO. que aparece detrás del nombre del canal indica que está codificado, mientras El icono que el icono significa que el canal está bloqueado. • Seleccione el canal pulsando los botones / y pulse P anterior o siguiente de las listas. • Pulse el botón ENTER/OK para ver el canal seleccionado. 6.
Funcionamiento del menú DTV Menú principal Después de instalar el sistema de antena y el TV con los conectores adecuados. • Enchufe el televisor a la corriente de red y enciéndalo. • Pulse el botón D.MENU para ver el menú principal. Aparecerá la siguiente visualización en pantalla: Aparecen las opciones del submenú. Para los submenús “Instalación”, “Organización de los canales” y “Bloqueo primario”, necesitará el código PIN. 1. Instalación El menú Instalación consta de 4 submenús: Selec.
1.3 Exploración manual Para sintonizar canales nuevos o señales débiles, el TV incorpora la opción “Exploración manual” en la que el usuario puede introducir los datos del canal. Tras seleccionar “Exploración manual” en el menú Instalación, aparecerá la pantalla siguiente: • Seleccione el número de canal. Puede seleccionar el canal concreto que desea buscar. Los valores siguientes son los predeterminados, pero es posible seleccionarlos. La barra de estado de la señal le dirá si son válidos.
2.1 Borrar frecuencia • Seleccione la lista de frecuencias que desea borrar pulsando el botón ROJO. • Pulse el botón ENTER/OK para confirmar. Esta función no suprime la frecuencia sino la lista de canales registrados de aquélla. 2.2 Suprimir canal • Seleccione el canal que desea borrar pulsando el botón ROJO. • Pulse el botón ENTER/OK para confirmar. 2.3 Suprimir todos los canales Cuando la ventana lo solicite, pulse el botón ENTER/OK para borrar todos los canales y pulse el botón EXIT para salir. 2.
3. Bloqueo primario La función de “Bloqueo primario” establece restricciones de visionado e impide el acceso no autorizado al televisor por medio del PIN (Número de identificación personal), que es un número de cuatro dígitos. (Código PIN establecido en fábrica: 0000) Este menú ofrece tres opciones: bloquear un canal determinado, cambiar el código PIN y establecer el bloqueo para módem. • Introducción del código PIN.
4. Configuración del sistema Puede cambiar los valores del sistema prefijados en fábrica en función de sus necesidades. 4.1 Selección del idioma La opción de “Selección de idioma” permite al usuario seleccionar el idioma de OSD, pista sonora, teletexto y EPG. • Para adaptarse a los usuarios de distintas zonas que hablan distintas lenguas, las OSD están disponibles en cinco idiomas (actualmente English, Deutsch, Français, Italiano, y Español).
4.4 Información del sistema Cuando se ponga en contacto con el proveedor de servicios o con un centro de servicio, es posible que soliciten información disponible en este menú. Coloque el cursor en este submenú y pulse el botón ENTER/OK. En la pantalla aparecerá lo siguiente. 4.5 Ampliación del software Puede descargar y actualizar el software de este televisor a través de un canal específico designado por la emisora de televisión. Ésta le proporcionará más información al respecto.
Decodificador de teletexto Muchos canales de Televisor incluyen “teletexto”, páginas de información escrita que proporciona datos como: Horas de los programas de televisión Boletines de noticias y partes meteorológicos. Resultados deportivos Subtítulos para sordos Las páginas de teletexto se organizan en seis categorías: Contenido Parte A Número de página seleccionado. B Identidad de la emisora. C Número de página actual o estado de la búsqueda. D Fecha y hora. E Texto. F Información de estado.
Selección de una página de teletexto específica Pulse los botón numéricos en el mando a distancia para introducir los números de página directamente: 1. Introduzca los tres dígitos del número de la página que se enumera en el índice pulsando los botón numéricos correspondientes. 2. Si la página seleccionada está vinculada con varias páginas secundarias, éstas se mostrarán secuencialmente. Para congelar la imagen en una página, pulse el botón PIP ( ). Para reanudar, vuelva a pulsar el bon PIP ( ). 3.
Configuración del mando a distancia Una vez configurado correctamente, el mando a distancia puede funcionar en cinco modos diferentes: TV, vídeo, Decodificador, DVD o receptor TV digital. Pulsando el botón correspondiente del mando a distancia podrá cambiar de un modo a otro y controlar cualquiera de estos equipos. El mando a distancia quizá no sea compatible con todos los reproductores de DVD, vídeos, decodificadores y receptores de TV digital. Configuración del mando a distancia para controlar el vídeo.
Configuración del mando a distancia para controlar el DVD. 1. Apague el DVD. 2. Pulse el botón DVD del mando a distancia del televisor. 3. Pulse el botón SET del mando a distancia del televisor. 4. Mediante los botóns de número del mando a distancia, intro duzca los tres dígitos del código del DVD correspondi-entes a la marca de su DVD, que aparece en la lista de la página 34~35 de este manual. Asegúrese de introducir los tres dígitos del códi go, incluso aunque el primer dígito sea un “0”.
Códigos del mando a distancia Vídeo, Marca Código Marca SAMSUNG 000 001 002 003 004 005 077 078 079 MONTGOMERY WARD Código 020 ADMIRAL 020 MTC 002 025 AIWA 025 MULTITECH 002 005 025 038 AKAI 004 027 032 NEC 007 008 018 026 037 062 064 AUDIO DYNAMICS 007 026 OPTIMUS 020 BELL&HOWELL 018 ORION 073 074 075 076 BROKSONIC 022 PANASONIC 021 056 071 072 CANDLE 002 003 006 008 015 055 PENTAX 019 041 075 CANON 021 056 PENTEX RESEARCH+ 008 CITIZEN 002 003 006 008 015 055 PHILCO
Decodificador de cable Marca Código Marca Código SAMSUNG 000 001 002 003 004 005 006 007 REGENCY 015 023 GI 041 SA 042 043 HAMLIN 003 024 031 SCIENTIFIC ATLAN 042 043 HITACHI 025 030 SPRUCER 022 JERROLD 038 039 STARGATE 2000 036 MACOM 025 030 SYLVANIA 016 MAGNAVOX 019 023 028 TEXSCAN 016 OAK 026 TOCOM 032 PANASONIC 003 022 027 037 044 UNIVERSAL 033 034 PHILIPS 019 021 023 028 VIEWSTAR 019 021 023 028 PIONEER 004 018 020 044 WARNER AMEX 046 RCA 014 022 040 ZE
DVD Marca Código Marca Código PANASONIC 024 034 124 134 136 137 138 THOMSON 145 PHILIPS 036 076 TOSHIBA 028 062 076 ROTEL 117 118 TECHNICS 139 RIO 120 TVIEW 072 RCA 023 035 074 075 131 132 TOKAI 073 RAITE 073 TEAC 096 ROWA 038 TECHWOOD 097 SAMPO 104 TREDEX 098 099 101 SONY 026 029 126 127 128 129 130 141 URBAN CONCEPTS 076 SHERWOOD 039 041 VENTURER 075 SVA 042 VOCOPRO 102 SYLVANIA 043 093 YAMAHA 032 063 SHARP 140 YAMAKAWA 040 073 SANSUI 062 XWAVE 10
Configuración del software del PC (basado en Windows XP) A continuación se muestra la configuración de visualización de Windows para un ordenador típico. Probablemente la pantalla real de su PC sea distinta; dependerá de la versión concreta de Windows y de la tarjeta de vídeo que tenga. Pero aunque las pantallas reales tengan un aspecto diferente, se aplicarán los mismos ajustes básicos y la misma información en la mayoría de los casos.
Selección del PC Sintonización gruesa y fina de la imagen (Bloqueo de Imagen): El propósito del ajuste de imagen calidad es remitir o reducir el ruido de la imagen. Si no se eliminan mediante la sintonización Fina, ajuste la frecuencia lo mejor que pueda (grueso) y vuelva a realizar la sintonización fina. Después de reducir el ruido, vuelva a ajustar la imagen para que quede alineada en el centro de la pantalla. 1. Ajustes predefinidos: Pulse el botón SOURCE para seleccionar el modo PC. 2.
Utilización del bloqueo Kensington antirrobo El anclaje Kensington es un dispositivo utilizado para asegurar un aparato cuando se utiliza en un sitio público. Este dispositivo de bloqueo se adquiere por separado. El aspecto y método de bloqueo puede diferir del que se muestra en la ilustración dependiendo del fabricante. Consulte el manual incluido con el anclaje Kensington para utilizarlo adecuadamente. 1.
Especificaciones técnicas y medioambientales Nombre del modelo LE32S6 LE37S6 LE40S6 Tamaño de pantalla (diagonal) 32 pulg. 37 pulg. 40 pulg.
Esta página se ha dejado en blanco expresamente. CO79.12258B.11.M13/joec!!!4: 3117.21.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.