Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site AUSTRIA BELGIUM 0800-SAMSUNG (726-7864) 0032 (0)2 201 24 18 844 000 844 www.samsung.com/at www.samsung.com/be www.samsung.com/cz CZECH REPUBLIC Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4 DENMARK EIRE FINLAND 70 70 19 70 0818 717 100 030-6227 515 www.samsung.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.(See back cover for more information) Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn".
English Contents Connecting and Preparing Your TV List of Parts......................................................... 2 Installing the Stand.............................................. 2 Installing the Wall Mount Kit................................ 2 Viewing the Control Panel................................... 3 Viewing the Connection Panel............................ 4 Viewing the Remote Control................................ 6 Installing Batteries in the Remote Control...........
List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. M4XL16 Remote Control & Batteries (AAA x 2) Power Cord Owner’s Instructions ➣ ➣ Cover-Bottom Stand Screw X 4 Warranty card Stand Safety Guide Cleaning Cloth Registration Cards Warranty card / Safety Guide / Registration Cards (Not available in all locations) The stand and stand screw may not be included depending on the model. Installing the Stand 2 1 1.
Viewing the Control Panel Side Panel buttons 1 2 3 4 5 6 5 The product colour and shape may vary depending on the model. 1 SOURCE Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3). In the on-screen menu, use this button as you use the ENTER button on the remote control. 5 Speakers 6 2 MENU Press to see an on-screen menu of your TV’s features. 3 (Power) Press to turn the TV on and off.
Viewing the Connection Panel [TV Side Panel] [TV Rear Panel] 1 2 3 4 5 6 3 7 Power Input 8 0 9 ➣ The product colour and shape may vary depending on the model. ➣ ➣ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. 1 PC IN [PC] / [AUDIO] - Connect to the video and audio output jack on your PC.
DVI IN(HDMI2) [R-AUDIO-L] - DVI audio outputs for external devices. ➣ Supported modes for HDMI/DVI and Component HDMI/DVI 50Hz HDMI/DVI 60Hz Component 480i 480p 576i 576p 720p 1080i X X O X O O X X O O X O O O O O O O 4 AUDIO OUT [R-AUDIO-L] - Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theatre.
Viewing the Remote Control 1 Television Standby button 2 Selects the TV mode directly 3 Number buttons for direct channel access 4 One/Two-digit channel selection 5 + : Volume increase : Volume decrease 6 Temporary sound switch-off 7 Displays the Channel List on screen 8 Use to quickly select frequently used functions. 9 Use to see information on the current broadcast 0 Colour buttons : Use these buttons in the Channel list, etc.
Installing Batteries in the Remote Control 1. 2. 3. ➣ Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. ➣ Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. ➣ If the remote control doesn’t work, check the following: 1. Is the TV power on? 2.
Viewing the Menus 1. W ith the power on, press the MENU button. The main menu appears on the screen. The menu’ s left side has icons: Picture, Sound, Channel, Setup, Input. 2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon’s submenu. 3.
Plug & Play When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available. 1. Press the POWER button on the remote control. The message "Start Plug & Play." is displayed with "OK" selected. 2. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. 3. Plug & Play Start Plug & Play. OK Enter Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.
If you want to reset this feature... 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup" then press the ENTER button. TV 2. Press the ENTER button again, to select "Plug & Play". For further details on setting up options, refer to the page 9. ➣ The “Plug & Play” feature is only available in the TV mode.
Storing Channels Manually You can store television channels, including those received via cable networks. When storing channels manually, you can choose: ♦ Whether or not to store each of the channels found. ♦ The programme number of each stored channel which you wish to identify. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER button. 3.
Adding / Locking Channels Using the Channel Manager, you can conveniently lock or add channels. Channel TV Country : Belgium Auto Store Manual Store Channel Manager Sort Name Fine Tune 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER button. ♦ Adding channels Using the Channel List, you can add channels. 3.
Sorting the Stored Channels This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Sort", then press the ENTER button. 3. Select the channel number that you wish to change by pressing the ▲ or ▼ button repeatedly. Press the ENTER button.
Fine Tuning Channel Reception Use fine tuning to manually adjust a particular channel for optimal reception. 1. Use the number buttons to directly select the channel that you want to fine tune. TV 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 3. 4. 5.
Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Press the ENTER 3. Press the ▲ or ▼ button to select the desired picture effect. Press the ENTER button. 4. Press the EXIT button to exit. TV button again, to select "Mode".
Adjusting the Custom Picture Your set has several settings which allow you to control picture quality. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 15) 2. Press the ▲ or ▼ button to select a particular item. Press the ENTER button. 3. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button. 4. Press the EXIT button to exit.
♦ Black Adjust: Off/Low/Medium/High You can directly select the black level on the screen to adjust the screen depth. ♦ Dynamic Contrast: Off/Low/Medium/High You can adjust the screen contrast so that the optimal contrast is provided. ♦ Gamma: -3 ~ +3 You can adjust the Primary Colour (Red, Green, Blue) Intensity. Press the ◄ or ► button until you reach the optimal setting. ♦ Colour Space: Auto/Native/Custom Colour space is a Colour matrix composed of red, green and blue colours.
Changing the Picture Options 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button. 3. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 4. When you are satisfied with your setting, press the ENTER button. 5. Press the EXIT button to exit.
♦ Screen Mode: 16:9/ Wide Zoom/Zoom/4:3 When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. ♦ 16:9: Sets the picture to 16:9 wide mode ♦ Wide Zoom: Magnify the size of the picture more than 4:3. ♦ Zoom: Magnify the size of the picture vertically on screen.
Viewing the Picture In Picture (PIP) You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. 1. 2. 3. 4. 5. ➣ Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Press the ▲ or ▼ button to select "PIP", then press the ENTER button.
Sound Features 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. TV Sound Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off TV Speaker : On Sound Select : Main 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 3. When you are satisfied with your setting, press the ENTER button. Move 4. Press the EXIT button to exit.
♦ Auto Volume: Off/On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. ♦ TV Speaker: Off/On If you want to hear the sound through separate speakers, cancel the internal amplifier.
Setting and Displaying the Current Time You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Time", then press the ENTER button. 3. Press the ENTER 4. 5.
Switching the Television On and Off Automatically 1. Press the MENU button to display the menu. Setup TV Plug & Play Press the ▲ or ▼ button to select "Setup", then press the Language : English Time ENTER button. Melody : Off Entertainment : Off 2. Press the ▲ or ▼ button to select "Time", then press the Energy Saving : Off PIP ENTER button. 3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2", "Timer 3", then press the ENTER button.
Melody / Entertainment / Energy Saving 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. TV Setup Plug & Play Language : English Time Melody : Off Entertainment : Off Energy Saving : Off PIP 3. When you are satisfied with your setting, press the ENTER button. Move 4. Press the EXIT button to exit.
♦ Energy Saving: Off/Low/Medium/High/Auto This feature adjusts the screen brightness depending on the surrounding lighting conditions. − Off: Turns off the energy saving function. − Low: Sets the TV to low energy saving mode. − Medium: Sets the TV to medium energy saving mode. − High: Sets the TV to high energy saving mode. − Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes. Easy Setting 1. Press the TOOLS button on the remote control. 2.
Editing the Input Source Names Name the device connected to the input jacks to make your input source selection easier. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Input", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button. 3. Press the ▲ or ▼ button to select the device that you wish to edit. Press the ENTER button. Press the ▲ or ▼ button to select the required device. Press the ENTER button. 4. 5.
Setting up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. 2. First, click on "Control Panel" on the Windows start menu.
Setting up the TV with your PC Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 3. When you are satisfied with your setting, press the ENTER button. 4. Press the EXIT button to exit.
What is Anynet+? Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are connected. Connecting Anynet+ Devices The Anynet+ system supports AV devices supporting Anynet+ only. Check if there is an Anynet+ mark on the AV device to be connected to the TV.
Setting Up Anynet+ The following settings are to use Anynet+ functions. Using the Anynet+ Function 1. 2. 3. ➣ ➣ ➣ Press The TOOLS button. Then Press the ENTER button to select "Anynet+(HDMI-CEC)". Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Press the ENTER button to select "Anynet+ (HDMI-CEC)", then press the ENTER button. Press the ▲ or ▼ button to select "On", then press the ENTER button. The "Anynet+ (HDMI-CEC)" function is enabled.
Scanning and Switching between Anynet+ Devices 1. 2. 3. 4. 5. ➣ ➣ ➣ ➣ ➣ Press the TOOLS button. Then press the ENTER button to TV P9 select "Anynet+(HDMI-CEC)". View TV Press the ▲ or ▼ button to select "Select Device", then press Select Device the ENTER button. Record Press the ▲ or ▼ button to select to a particular device and Menu on Device press the ENTER button. It is switched to the selected Device Operation device.
Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu View TV Select Device Record Menu on Device Device Operation Receiver Setup Description Switches from Anynet+ to TV broadcast mode. Your TV connects to the corresponding device. Starts a recording. (This menu works only for a device supporting recording.) Shows the menu of the connected device. Example. When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
Recording You can make a recording of a TV programme using a recorder. Press the button. Recording begins. (Only when the Anynet+ enabled recording device is connected.) ➣ The current TV programme is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded. ➣ You can also record the source streams by selecting "Record" after pressing the TOOLS button.
Check Points before Requesting Service Symptom Anynet+ does not work. Solution ■ ■ ■ ■ ■ ■ ■ ■ ■ I want to start Anynet+. ■ ■ ■ I want to exit Anynet+. ■ ■ ■ The Connecting to Anynet+ device… message appears on the screen. The Anynet+ device does not play. The connected device is not displayed. The TV programme cannot be recorded. ■ ■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Connect only one receiver.
Teletext Feature Most television stations provide written information services via Teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons. For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. 1.
The teletext pages are organized according to six categories: Part A B C D E F Contents Selected page number. Broadcasting station identity. Current page number or search status. Date and time. Text. Status information. FASTEXT information. Teletext information is often divided between several pages displayed in sequence, which can be accessed by: ♦ Entering the page number ♦ Selecting a title in a list ♦ Selecting a coloured heading (FASTEXT system) Press the TV button to exit from the teletext display.
Wall-Mount Adjustment (Sold separately) (depending on the model) Once the auto wall mount is installed, your TV’s position can be easily adjusted. TV Rear Panel Auto Wall-Mount SERVICE Cable (Not supplied) Entering the menu 1. Press the ▲, ▼, ◄ or ► button on your remote control. The Wall Mount Adjustment screen is displayed. If the Wall Mount Adjustment screen is not displayed when clicking on a direction button while watching your TV, use the menu to display that screen.
Moving to the remembered position 1. 2. ➣ ➣ ➣ ➣ ➣ Complete Step 1 of “Entering the menu”. Wall-Mount Adjusment Pressing a Colour (Red, Green, Yellow) button moves the auto wall mount to the saved position. ➣ You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons. ➣ If you adjust the Position after moving to a pre-set position, the position display will disappear.
Troubleshooting: Before Contacting Service Personnel No sound or picture. Check that the mains lead has been connected to a wall socket. Check that you have pressed the button on your set. Check the picture contrast and brightness settings. Check the volume. Normal picture but no Check the volume. sound. Check whether the MUTE button has been pressed on the remote control. Check if "TV Speaker" is on. Screen is black and power On your computer check; Power, Signal Cable.
Technical and Environmental Specifications Model Name Screen Size (Diagonal) PC Resolution Sound Output Dimensions (WxDxH) Body With stand Weight With stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right) Model Name Screen Size (Diagonal) PC Resolution Sound Output Dimensions (WxDxH) Body With stand Weight With stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity