User Manual

English - 26
Checking the Digital-Signal Information
You can get information about the signal status.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Signal Information”, then press the
ENTER button.
3.
Press the EXIT button to exit.
If the signal status is poor, the “No signal.” message is displayed.
While viewing a Digital channel, this function can be selected.
➣
➣
Channel
Channel Mode : Added Ch.
Fine Tune
Signal Information  ►
Signal Information
Frequency : 482000 KHz
Service ID : 0401
Multiplex : (TSID 0004, ONID 20fa)
Network : (ID 20fa)
Bit error level
0
Signal Strength
88
ReturnEnter
OK
BN68-01424M-00Eng.indb 26 2008-08-19 �� 2:59:01