User Manual

English - 32
Updating the Channel List Automatically
You can update the channel list when the broadcaster adds new Services or if you move the
TV to a new location.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER button.
3. Press the ▲ or ▼ button to select “Auto Store”, then press the ENTER button.
4. The update procedures differ depending on the selected “Country”. Update the channel list by
selecting an appropriate option.
♦
When the “Country” was set to “Finland”
Press the ▲ or ▼ button to select “Auto”, “Cable” or “Aerial”.
Press the ENTER button.
Press the ENTER button to select “Start”.
• Auto: Scans channels automatically.
• Cable: Scans cable channels.
• Aerial: Scans aerial channels.
This product cannot scan both cable and aerial channels
at the same time.
When it has nished, the number of scanned services
will be displayed.
The existing favourite channel list will not be deleted
when the channel list is updated.
♦
When the “Country” was set to “Sweden”, or “Denmark”
Press the ▲ or ▼ button to select “Cable” or “Aerial”.
Press the ENTER button.
When selecting “Cable”:
- Frequency
: Displays the frequency for the channel.
(Differs in each country)
- Modulation: Displays available modulation values.
- Symbol rate: Displays available symbol rates.
- Network ID: Displays the network identication code.
Press the red button to start the scan for digital services.
When it has nished, channels are updated in the channel
list.
When selecting “Aerial”:
Press the
ENTER button to select “Start”.
5. Press the EXIT button to exit.
If the signal status is poor, the “No Service found! Check
the aerial connection” message is displayed.
➣
➣
➣
➣
➣
Auto Store
Auto 
Cable 
Aerial 
Move Enter Return
DTV
Choose system to scan
Auto Store
Services found: 0 Channel: 5
0%
Enter Return
DTV
Stop
Scanning for aerial digital services...
Auto Store
Cable 
Aerial 
Move Enter Return
DTV
Choose system to scan
Auto Store
Frequency
Enter freq. Move Return
DTV
Modulation
Symbol rate
Network ID
143000
64QAM
6875
100
KHz
kS/s
Search
Auto Store
Services found: 0 Channel: -
0%
Enter Return
DTV
Start
BN68-01409J-01Eng-0602.indd 32 2008-06-02 ¿ÀÈÄ 4:13:39