Upgrade guide

ManualsBrandsSamsung ManualsTVLE46A856S1M

Advanced Software Upgrade Guide

Applicable models: LCD TV and PDP TV are released on 2008

–

For Europe HD DTV model (LE**A7/A8/A9 series, PS**A7 series → MX(XC/XH/XU/ZG/XQ/RU/UA/CS)

–

For France HD DTV model (LE**A4/A5/A6***

XZF, PS**A4/A5/A6***MXZF)

–

For Nordic HD DTV model (LE**A4/A5/A6/A7/A8/A9***WXXE, PS**A4/A5/A6/A7***WXXE)

➣

The appearance of the TV and the remote control may differ depending on your TV model.

Downloading the software.

✔

Download new S/W on-line (www.samsung.com/support/download)

Connect to www.samsung.com and press the button at the top right to move to the website for

the corresponding country.

The name of the USB folder name may differ depending on the model.

Model Name

Folder Name / File Name

LE**A7/A8/A9*****MX (XC/XH/XU/ZG/XQ/RU/UA/CS)

PS**A7*****MX (XC/XH/XU/ZG/XQ/RU/UA/CS)

T-RBYDEU / T-RBYDEU.exe

LE**A5/A6*****MXZF

T-AMBDFR / T-AMBDFR.exe

PS42A4*****MXZF

T-PRPDFR / T-PRPDFR.exe

LE**A7/A8/A9*****WXXE, PS**A7*****WXXE

T-RBYDND / T-RBYDND.exe

LE**A4*****WXXE, PS**A4*****WXXE

T-CRLDND / T-CRLDND.exe

LE**A6*****WXZG

T-AMBDGR / T-AMBDGR.exe

LE**A4*****MXZF, PS50A4*****MXZF

T-CRLDFR / T-CRLDFR.exe

PS**A5*****MXZF, PS**A6*****MXZF T-SPNDFR / T-SPNDFR.exe

LE**A5/A6*****WXXE, PS**A5/A6*****WXXE

T-AMBDND / T-AMBDND.exe

–

Summary of content (5 pages)

PAGE 1
Advanced Software Upgrade Guide Applicable models: LCD TV and PDP TV are released on 2008 –F or Europe HD DTV model (LE**A7/A8/A9 series, PS**A7 series → MX(XC/XH/XU/ZG/XQ/RU/UA/CS) – For France HD DTV model (LE**A4/A5/A6***MXZF, PS**A4/A5/A6***MXZF) – For Nordic HD DTV model (LE**A4/A5/A6/A7/A8/A9***WXXE, PS**A4/A5/A6/A7***WXXE) ➣ The appearance of the TV and the remote control may differ depending on your TV model. 1 Downloading the software. ✔ Download new S/W on-line (www.samsung.
PAGE 2
✔ How to prepare the USB Memory Drive 1. Save the firmware file from ‘Samsung.com’ onto your computer. File Name : – T-AMBDFR.exe, T-CRLDFR.exe, T-PRPDFR.exe, T-SPNDFR.exe (For France model) – T-AMBDND.exe, T-CRLDND.exe, T-RBYDND.exe (For Nordic model) – T-RBYDEU.exe (For Pan Euro model) – T-AMBDGR.exe (For Germany model) 2. Connect the USB Memory Drive to the USB port of your PC. Copy the file onto the USB Memory Drive. 3. Go to the USB Memory Drive and then double click the file. 4.
PAGE 3
2 Connecting the USB device to the TV. ✔ ✔ Insert USB to “WISELINK” on Side TV. HDMI IN4 If USB is inserted perfectly, the below OSD is showed up. – if not, disconnect and re-connect USB to “WISELINK” port. ✔ Use ► and Enter button on remote control, Select “No”. New portable device connected. Play multimedia files using WISELINK? Device : TURBO II Yes No 3 Running the software upgrade ﬁle. ✔ Press the MENU button. Press the ▲, ▼, and ENTER buttons to select “Setup”→ “Software Upgrade”→ “By USB”.
PAGE 4
✔ Wait about 30 seconds and check S/W version on OSD. Press the ENTER button to select “OK”. – If the TV fails to recognize the upgraded file, check the files in the software folder and copy the files to the folder of the USB memory again. Warning!! Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. Software Upgrade Software Upgrade Upgrade version XXXX to version XXXX? The system will be reset after upgrade. Scanning for USB.....
PAGE 5
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre AUSTRIA BELGIUM CZECH REPUBLIC 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at 02 201 2418 www.samsung.com/be 800 - SAMSUNG (800-726786) www.samsung.com/cz Distributor pro Českou republiku: Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8 8 - SAMSUNG (7267864) www.samsung.