User Manual
Table Of Contents
- Precautions When Displaying a Still Image
- Contents
- CONNECTING AND PREPARING YOUR TV
- SETTING THE CHANNELS
- SETTING THE PICTURE
- Changing the Picture Standard
- Adjusting the Custom Picture
- Changing the Colour Tone
- Adjusting the Color Tone with the Preferred Color Component
- Resetting the Picture Settings to the Factory Defaults
- Changing the Picture Size
- Changing the Auto Wide (4:3)
- Digital Noise Reduction
- DNIe Demo (Digital Natural Image engine)
- Changing the Colour Space
- Freezing the Current Picture
- Viewing the Picture In Picture (PIP)
- SETTING THE SOUND
- SETTING THE TIME
- SETTING THE OTHERS
- WISELINK
- USING THE DTV FEATURE
- Previewing the DTV Menu System
- Updating the Channel List Automatically
- Updating the Channel List Manually
- Editing Your Favourite Channels
- Selecting Channel Manager
- Displaying Programme Information
- Viewing the EPG (Electronic Programme Guide) Information
- Using the Scheduled List
- Setting the Default Guide
- Viewing All Channels and Favourite Channels
- Setting the Preferred Languages
- Choosing Your Language
- Adjusting the Translucency Level
- Setting up the Parental Lock
- Setting the Subtitle
- Selecting the Preferred Language (Subtitle or Audio)
- Setting the Digital Text
- Viewing Product Information
- Checking the Signal Information
- Upgrading the Software (Option)
- Viewing Common Interface
- Selecting the CI (Common Interface) Menu
- Resetting
- USING THE TELETEXT FEATURE
- SETTING THE PC
- RECOMMENDATIONS FOR USE
- Warning! Important Safety Instructions
- Wiring the Mains Power Supply Plug (UK Only)
- Warranty Card
English-43
Viewing Product Information
You can view your product information. For service or repair, please contact a Samsung
approved dealer.
1. Press the D.MENU button to display the DTV menu.
2. Press the or button to select "System", then press the ENTER button.
3.
Press the ENTER button again, to select "Product Information".
The Product Information menu is selected.
- Software Version, Firmware Version
4. Press the EXIT button to exit.
Checking the Signal Information
Upgrading the Software (Option)
You can get information about the signal status.
1. Press the D.MENU button to display the DTV menu.
2. Press the or button to select "System", then press the ENTER button.
3. Press the or button to select "Signal Information",
then press the ENTER button.
4. Press the EXIT button to exit.
If the signal status is poor, the "No signal." message is displayed.
To keep your product up-to-date with new Digital Television features then software upgrades
are periodically broadcast as part of the normal Television signal.
It will automatically detect these signals and display the software upgrade banner. You are
given the option to install the upgrade.
Upgrade Now
If you select "Upgrade Now", the "iDTV" immediately installs the new upgrade and then restarts.
Upgrade Later
If you select "Upgrade Later", the upgrade is postponed until the next restart or channel change
some 90 minutes later, when the upgrade dialog appears again.
Don’t Upgrade
If you select "Don’t Upgrade", the "iDTV" does not perform the upgrade and the software upgrade
banner is not displayed again.
The upgrade is still stored internally, to subsequently upgrade to the new version then the
following sequence of steps are performed.
1. Press the D.MENU button to display the DTV menu.
2. Press the or button to select "System", then press the ENTER button.
3. Press the or button to select "Software Upgrade",
then press the ENTER button.
4. To switch to an alternative version, press the red button.
Press the blue button to reset, activate the upgrade and restart.
5. Press the EXIT button to exit.
BN68-01007T-01Eng.indd 43BN68-01007T-01Eng.indd 43 2006-09-07 9:47:522006-09-07 9:47:52