User Manual
40
English
Advanced Features
Account Login
For a application with multiple categories, use and to
access the different categories.
For a more enjoyable application experience, register
✎
and log in to your account.
For instructions on creating an account, refer to
✎
Setting
up Internet@TV Internet@TV ID Create.
1. Press the Red button in Internet@TV home page.
2. Select desired User account, then press the ENTER
E
button.
If you want create account, press Red button then
✎
create account OSD window appear.
3. Enter the Password.
When login succeeds, User account will be
✎
displayed on the screen.
Setting up Internet@TV ¦
Settings
Create IDs and configure Internet@TV settings from this
screen. Highlight Settings using and buttons and press
the ENTER
E
button.
System Setup ■
Ticker Autorun
✎
may not be supported depending
on country.
Ticker Autorun (Off / On): Enable/disable ticker autorun
upon powering on the TV.
Channel Bound Service (Off / On): Some channels
support application as an Internet data service, allowing
you to access the Internet service while watching TV.
Only available if supported by the broadcaster.
✎
Reset: Resets Internet@TV settings to factory default
settings.
Change the Service Lock password
The default password set is "0-0-0-0."
✎
If you forget the password, press the following
✎
sequence of remote control buttons to reset the
password to “0-0-0-0”: POWER (off) MUTE
9 2 8 POWER (on).
Internet@TV ID ■
You can use this menu when creating, deleting the
account. You can control your account including
contents site’s account information.
Account is only for internet@TV.
✎
Create: Create an account and link it with desired
service application.
NOTE
✎
Account will be made less than 10.
x
Maximum number of characters is 10.
x
R Return
Settings
Reset
Login
A
R Cancel
User account :
adgjm
BN68-02558A.indb 40 2010-02-22 �� 8:00:53