Quick Setup Guide STOP LN B550/LN 7B550/LN40B550/ LN46B550/ LN5 B550 Please do not return this unit If you are having problems operating this TV, Please call; 1- 00-SAMSUNG (1- 00-7 6-7 64) For web support please visit www.samsung.com/support 1-800-SAMSUNG (7267864) Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Call center hours of operation (Mon-Sun 9AM-12AM EST).
Remote Control See “Remote Control” in the owner’s instructions for details. 1 POWER Turns the TV on and off. 2 TV Selects the TV mode directly. 3 NUMERIC BUTTONS Press to change the channel. 4 _ Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel '54-3', press '54', then press '_' and '3'. 5 MUTE M Press to temporarily cut off the sound. 6 y Press to increase or decrease the volume.
Installing the Stand (LN32B550) Back 2 2 Front 2 1 1 1 1 Place the Guide Stand and Cover Neck onto the stand and fasten it using the three screws. 2 Attach your LCD TV to the stand. ➣ Two or more people should carry the TV. ➣ Make sure to distinguish between the front and back of the stand when attaching it. 3 Fasten two screws at position 1 and then fasten two screws at position 2. Installing the Stand (LN37B550, LN40B550, LN46B550, LN52B550) 2 2 1 1 1 Attach your LCD TV to the stand.
Connections Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI TV Rear Panel TV Side Panel 1 Connect an HDMI Cable between the HDMI IN 1 (DVI), 2, 3 or 4 jack on the TV and the HDMI jack on the DVD / Blu-ray Player or Cable Box / Satellite receiver (Set-Top Box). What is HDMI? • HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals using a single cable.
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via Component cables TV Rear Panel DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) 1 Component Cable (Not supplied) 2 Audio Cable (Not supplied) 1 Connect a Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
Connecting a Digital Audio System 1 TV Rear Panel Digital Audio System 1 Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. Optical Cable (Not supplied) ➣ When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and adjust the volume level with the system’s volume control. ➣ 5.
Connecting a Camcorder Using a Video Cable TV Side Panel 1 Connect a Video Cable between the AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder. 2 Connect Audio Cables between the AV IN 2 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder. Camcorder 1 Video Cable (Not supplied 2 Audio Cable (Not supplied) ➣ Each Camcorder has a different back panel configuration. ➣ When connecting a Camcorder, match the color of the connection terminal to the cable.
Connecting a PC Using a D-Sub Cable Using a D-Sub Cable TV Rear Panel 1 Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. 2 Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. ➣ When connecting a PC, match the color of the connection terminal to the cable.
Turning the TV On and Off 4 Press the POWER button on the remote control. You can also use the POWER button on the TV. Viewing the Menus When selecting the Cable TV system: Press the ENTERE button to start the auto program. Press the ▲,▼, ◄ or ► to select the correct analog signal cable system source among “STD”, “HRC”, and “IRC”. Press the ▲ or ▼ button to select “Start”, then press the ENTERE button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital.
Setting the Channel List Changing the Picture Standard You can delete or add a channel to display the channels you want. You can select the type of picture which best corresponds to your viewing requirements. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTERE button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTERE button. 2 Press the ◄ button to select “Added Channels”. Press the ▲ or ▼ button to select “All Channels”.
Customizing the Picture Settings Setting the Screen Size Your television has several setting options that allow you to control the picture quality. Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.
To Select the Source TV AV1 ---- AV2 ---- Component1 ---- Component2 ---- PC ---- Refresh T Tools Press the SOURCE button on the Remote Control You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you would like to watch. ➣ Available signal sources: TV, AV1, AV2, Component1, Component2, PC, HDMI1/DVI, HDMI2, HDMI3. (LN52B550) TV, AV, Component, PC, HDMI1/DVI, HDMI2, HDMI3.
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. (726-7864) Problem Possible Solution Poor picture Try another channel. / Adjust the antenna. / Check all wire connections. Poor sound quality. Try another channel. / Adjust the antenna. No picture or sound. Try another channel. / Press the SOURCE button. / Make sure the TV is plugged in.
Guide d'installation rapide STOP LN B550/LN 7B550/LN40B550/ LN46B550/ LN5 B550 Veuillez SVP ne pas retourner cet appareil. En cas de problèmes de fonctionnement, veuillez composer le numéro suivant : 1- 00-SAMSUNG (1- 00-7 6-7 64) Pour obtenir de l’assistance en ligne, allez au lien suivant : www.samsung.com/support 1-800-SAMSUNG (7267864) Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 Samsung Electronics Canada Inc.
Télécommande Reportez-vous à la section "Télécommande" du guide de l’utilisateur pour plus de détails. 1 POWER : Permet d’allumer et d’éteindre le téléviseur. 2 TV: Permet de sélectionner directement le mode TV. 3 TOUCHES NUMÉRIQUES : Appuyer sur cette touche pour changer de canal. 4 _ : Appuyer sur cette touche pour sélectionner des canaux supplémentaires (numériques) diffusées par la même station. Par exemple, pour sélectionner le canal ‘54-3’, appuyez sur ‘54’, puis sur _ et ‘3’.
Installation du support (LN32B550) Arrière 2 2 Avant 2 1 1 1 1 Placez le guide de support et le collet sur le support et fixez-les à l’aide des vis. 2 Fixez votre téléviseur ACL sur le support. ➣ Deux personnes ou plus devraient porter le téléviseur. ➣ S’assurer de bien distinguer le devant et l’arrière du support lors de l’assemblage. 3 Vissez les vis à la position 1, puis vissez les vis à la position 2.
Conexions Branchement d’un lecteur DVD/Blu-ray/câblosélecteur ou récepteur satellite (boîtier décodeur) via HDMI Panneau arrière du téléviseur Panneau latéral du téléviseur 1 Branchez un câble HDMI entre la prise HDMI IN 1 (DVI), 2, 3 ou 4) du téléviseur et la prise HDMI du lecteur DVD/Bluray/câblosélecteur ou récepteur satellite (boîtier décodeur).
Branchement d’un lecteur DVD/Blu-ray/câblosélecteur ou récepteur satellite (boîtier décodeur) via les câbles de composantes 1 Panneau arrière du téléviseur Lecteur DVD/Blu-ray/ câblosélecteur ou récepteur satellite (boîtier décodeur) 1 Câble de composante (non fourni) 2 Câble audio (non fourni) Branchez un câble composant entre les prises COMPONENT IN (1 ou 2) [Y, PB, PR] du téléviseur et les prises COMPONENT [Y, PB, PR] du lecteur DVD/Blu-ray/câblosélecteur ou récepteur satellite (boîtier décodeur).
Connexion d'une chaîne audio numérique 1 Panneau arrière du téléviseur Chaîne audio numérique 1 Branchez un câble optique entre les prises DIGITAL AUDIO OUT (OPTICAL) du téléviseur et les prises d'entrée audio numérique de la chaîne. Câble optique (non fourni) ➣ Lorsqu'une chaîne audionumérique est branchée à la prise DIGITAL AUDIO OUT (OPTICAL) : baissez le volume du téléviseur, puis réglez le volume à l'aide de la commande de volume de la chaîne. ➣ La diffusion audio à 5.
Connexion d'un caméscope Utilisation d’un câble vidéo Panneau latéral du téléviseur Caméscope 1 Câble vidéo (non fourni) 2 Câble audio (non fourni) 1 Branchez un câble vidéo entre la prise AV IN 2 [VIDEO] du téléviseur et la prise VDEO OUT du caméscope. 2 Branchez les câbles audio entre les prises AV IN 2 [R-AUDIO-L] du téléviseur et les prises AUDIO OUT du caméscope. ➣ La configuration arrière de chaque caméscope est différente suivant les appareils.
Connexion d'un PC Utilisation d’un câble secondaire D Utilisation d’un câble secondaire D Panneau arrière du téléviseur 1 Branchez un câble secondaire D entre le connecteur PC IN [PC] du téléviseur et le connecteur de sortie PC de votre ordinateur. 2 Branchez un câble audio PC entre la prise PC IN [AUDIO] du téléviseur et la prise de sortie audio de la carte son de l'ordinateur. ➣ Lorsque vous connectez un PC, assurez-vous que la couleur de la prise correspond à celle du câble.
Mise en marche et arrêt de la télévision Appuyez sur le bouton POWERP de la télécommande. Il est aussi possible d’utiliser la touche POWERP du téléviseur. 4 Au moment de la sélection du système de télévision par Câble : Appuyez sur ENTERE pour amorcer la mémorisation automatique. Appuyer sur les touches ▲,▼, ◄ ou ► pour choisir la source du signal analogique appropriée “STD”, “HRC”, ou “IRC”. Appuyer sur la touche ▲ ou ▼ pour sélectionner “Démarrer”, puis sur ENTERE.
Réglage de la liste de canaux Changement du format normal de l’image Il est possible d’ajouter ou de supprimer un canal pour afficher seulement les canaux désirés. Il est possible de choisir le type d’image qui correspond le plus à ses exigences. Appuyez sur le bouton MENU. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Chaîne”, puis appuyez sur le bouton ENTERE. Appuyez sur les bouton ▲ ou ▼ pour sélectionner “Liste des canaux”, puis appuyez sur le bouton ENTERE.
Personnalisation des réglages de l’image Réglage du format de l’image Le téléviseur offre plusieurs options de réglage de la qualité de l’image. Vous pouvez parfois modifier la taille de l’image sur votre écran. Six tailles d’écran différentes sont disponibles pour votre téléviseur, chacune conçue pour fonctionner au mieux avec des types d’entrées vidéo spécifiques. Votre décodeur Câble ou votre récepteur satellite peut également disposer de ses propres tailles d’écran.
Pour sélectionner la source TV AV1 ---- AV2 ---- Composante1 ---- Composante2 ---- PC ---- Rafraîchir T Outils Appuyez sur la touche SOURCE de la télécommande. Vous pouvez sélectionner le mode TV ou une source d’entrée branchée au téléviseur. Cette touche permet de choisir la source d’entrée désirée. ➣ Sources de signal accessibles : TV, AV1, AV2, Composante1, Composante2, PC, HDMI1/DVI, HDMI2, HDMI3. (LN52B550) TV, AV, Composante, PC, HDMI1/DVI, HDMI2, HDMI3.
Identification des problèmes Le tableau ci-dessous dresse la liste des problèmes courants et suggère des solutions. Si aucun de ces conseils ne permet de corriger le problème, communiquer avec le service à la clientèle de Samsung en composant le 1-800-SAMSUNG. Problème Solution possible Image de qualité médiocre. Essayez une autre canal. / Réglez l’antenne. / Vérifiez tous les branchements. Son de qualité médiocre. Essayez une autre canal. / Réglez l’antenne. Aucune image ou aucun son.
Cette page est laissée intentionnellement en blanc. BN68-01884F-00Eng.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Comuníquese con SAMSUNG WORLDWIDE Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de atención al cliente de SAMSUNG. Country Customer Care Center Web Site CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com Address Samsung Electronics Canada Inc.