User Manual (ver.1.0)

English-23
Using Automatic Picture Settings
Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, and “Custom”) that are preset at the factory.
You can activate either Dynamic, Standard, Movie, or Custom by making a selection from the menu.
Or, you can select “Custom” which automatically recalls your personalized picture settings.
1. Press the MENU button to display the menu.
Press the  or  buttons to select “Picture”, then press the ENTER button.
2. Press the ENTER button to select “Mode”.
Press the ENTER button again.
Press the  or  buttons to select the “Dynamic”, “Standard”, “Movie”,
or “Custom” picture setting. Press the ENTER button.
When in PC mode, Tint, Sharpness and Color are not available.
3. Press the  or  buttons to select “Contrast”, “Brightness”, “Sharpness”,
“Color”, or “Tint”, then press the ENTER button.
4. Press the  or  buttons to decrease or increase the value of a particular item.
For example, if you select “Contrast”, pressing the  button increases it.
Press the ENTER button.
Press the
EXIT button to exit.
• “Tint” doesn’t operate in HDMI, PC or any Component mode.
• The Tint cannot be adjusted while watching Digital TV.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint , OSD color will
also be adjusted accordingly.
 Choose Dynamic to increase the clarity and sharpness of the picture.
 Choose Standard for the standard factory settings.
 Choose Movie when watching movies.
 Choose Custom if you want to adjust the settings according to personal preference.
Picture Control
BN68-00883V-00Eng.qxd 10/1/04 10:57 PM Page 23