User Manual (ver.1.0)

English-27
Selecting a Signal Source (External A/V) for PIP. (depending on the model)
3. Press the  or  buttons to select “Source”, then press the ENTER button.
Select the source of the sub picture (PIP) by pressing the  or  buttons and
press the ENTER button.
MAIN: TV(Analog) / PIP: HDMI(1, 2)
The sub picture can serve different source selections based on what the main picture is set to.
In the PIP Source selection menu, ‘TV’ represents both analog and digital tuning.
Swapping the Contents of the PIP and Main image
4. Press the  or  buttons to select “Swap”, then press the ENTER button.
Press the PIP Channel buttons on the remote control.
Changing the PIP Channel
5. Press the  or  buttons to select “Channel”, then press the ENTER button.
Press the  or  buttons to select the desired channel in the PIP window.
Press the
ENTER buttons.
• MAIN: AV(1, 2), S-Video(1, 2), Component / PIP: TV(Digital)
• MAIN: PC, HDMI(1,2) / PIP: TV(Analog)
• The channel can be active when the sub picture is set to TV.
Press the SWAP button on the remote control.
Changing the Position of the PIP Window
6. Press the  or  buttons to select “Position”, then press the ENTER button.
Press the  or  buttons to select the desired PIP window position.
Press the
ENTER buttons.
The Double ( ), Double Wide ( ) mode cannot be selected in Position mode.
Changing the Size of the PIP Window
7. Press the  or  buttons to select “Size”, then press the ENTER button.
Press the  or  buttons to select the desired size of the PIP window.
Press the ENTER button.
Press the
EXIT button to exit.
If main picture is in PC mode, Size is not available.
• You may notice that the picture in the PIP window becomes slightly unnatural when
you use the main screen to view a game or karaoke.
• You can adjust picture position only by using the size menu.
BN68-00883V-00Eng.qxd 10/1/04 10:57 PM Page 27