User Manual (ver.1.0)

English-32

Press the ANTENNA button on the remote control.

Setting the Channel Manager

1. Press the MENU button to display the menu.

Press the  or  buttons to select “Channel”, then press the ENTER button.

2. Press the  or  buttons to select “Channel Manager”,

then press the ENTER button.

3. Press the ENTER button to select “All”.

4. Press the  or  buttons to select a channel to delete,

then press the

ENTER button.

Press the  or  buttons to select “Delete”, then press the ENTER button to

delete the channel.

You can add or delete a channel so only channels you want are displayed.

Selecting the Antenna

1. Press the MENU button to display the menu.

Press the  or  buttons to select “Channel”, then press the ENTER button.

2. Press the ENTER button to select “Antenna”.

Press the  or  buttons to select “Air” or “Cable”,

then press the ENTER button.

Press the

EXIT button to exit.

If the antenna is connected to ANT 1 IN (AIR),

select “Air” and if it is connected to ANT 2 IN (CABLE),

select “Cable”.

If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are

connected, select the antenna input you want. If the antenna

input is not selected properly, noise may appear on the screen.

Channel Control

BN68-00883V-00Eng.qxd 10/1/04 10:57 PM Page 32