User Manual (ver.1.0)

English-35
Fine Tuning Analog Channels
1. Press the MENU button to display the menu.
Press the  or  buttons to select “Channel”, then press the ENTER button.
2. Press the  or  buttons to select “Fine Tune”, then press the ENTER button.
3. Press the  or  buttons to adjust the fine tuning.
If you do not store the fine-tuned channel in memory, adjustments are not saved.
4. To store the fine tuning setting in the TV’s memory, press the ENTER button.
To reset the fine tuning setting, press the  button to select “Reset”,
then press the
ENTER button.
Press the
EXIT button to exit.
Only analog TV channels can be fine tuned.
“*” will appear next to the name of fine-tuned channels.
Use fine tuning to manually adjust a particular channel for optimal reception.
Labeling Channels
1. Press the MENU button to display the menu.
Press the  or  buttons to select “Channel”, then press the ENTER button.
Press the  or  buttons to select “Name”, then press the ENTER button.
2. Press the  or  buttons to select the channel to be assigned a new name,
then press the ENTER button.
Press the  or  buttons to select a letter, a number or a blank
(Results in this sequence: A...Z, 0...9, +, -,
*
, /, blank).
Press the  button to switch to the next field, which will be selected.
Select a second letter or digit by pressing the  or  buttons, as above.
Repeat the process to select the last three digits. When you have finished,
press the ENTER button to assign the new name.
To erase the assigned new name, select "Clear" by pressing the  or 
button, then press the ENTER button.
Press the
EXIT button to exit.
The names of digital broadcasting channels are automatically assigned and thus
cannot be assigned by users.
BN68-00883V-00Eng.qxd 10/1/04 10:57 PM Page 35