User Manual S27D850T S32D850T The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS CONNECTING AND USING A SOURCE DEVICE 7 Copyright 7 Icons used in this manual 8 Cleaning 9 Securing the Installation Space 9 Precautions for storage 10 Safety Precautions 10 11 12 14 Symbols for safety precautions Electricity and Safety Installation and Safety Operation 17 Correct posture to use the product 18 Checking the Contents 18 Checking the Components 19 Parts 19 21 Frontal Button Reverse Side 23 Installation 23 24 2
Table Of Contents SCREEN SETUP 30 Connecting and Using a PC 30 31 31 32 33 34 35 36 Connection Using the DVI Cable Connection Using the DVI-HDMI Cable Connection Using the HDMI Cable Connection Using the HDMI-DVI Cable Connection Using the DP Cable Connecting to Headphones or Speakers Connecting the Power Tidying Up the Connected Cables 37 Connecting the Product to a PC as a USB HUB 37 37 Connecting a PC to the Product Utilizing the Product as a USB HUB 39 Driver Installation 40 Setting Optimum
Table Of Contents SCREEN ADJUSTMENT COORDINATING OSD SETUP AND RESET 51 Response Time 51 Configuring the Response Time 52 Image Size 52 Changing the Image Size 54 H-Position & V-Position 54 Configuring H-Position & V-Position 55 PIP/PBP 56 57 58 59 60 62 66 Configuring PIP/PBP Mode Configuring Size Configuring Position Configuring Sound Source Configuring Source Configuring Image Size Configuring Contrast 68 Language 68 Configuring Language 69 Display Time 69 Configuring Display T
Table Of Contents 81 Source Detection 81 Configuring Source Detection 82 Key Repeat Time 82 Configuring Key Repeat Time 83 Off Timer 83 84 Configuring Off Timer Configuring Turn Off After 85 Reset All 85 Initializing Settings (Reset All) 86 Information 86 Displaying Information 87 Configuring Brightness, Contrast and Volume from the Initial Screen INSTALLING THE SOFTWARE 88 Easy Setting Box 88 89 Installing the Software Removing the Software TROUBLESHOOTING GUIDE 90 Requirement
Table Of Contents 105 Responsibility for the Pay Service (Cost to Customers) 105 105 105 Not a product defect A Product damage caused by customer's fault Others 106 Correct Disposal 106 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 107 Terminology INDEX Table Of Contents 6
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. 2014 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft and Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor with a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 10 cm 10 cm 10 cm 10 cm 10 cm Precautions for storage Be sure to contact Samsung Customer Service Center (page 99) if the inside of the monitor needs cleaning.
Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. z An electric shock or fire may result. Do not plug many products into the same power socket. z Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. z Otherwise, an electric shock may result.
Before Using the Product Caution Do not unplug the power cord when the product is in use. z The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. z ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. z If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). z The product may fall and break or cause a personal injury. z Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. z ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. z The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product During a lightning or thunderstorm, power off the product and remove the power cable. z ! An electric shock or fire may result. Do not drop objects on the product or apply impact. z An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable. z Otherwise, the power cable may be damaged and product failure, an electric shock or fire may result. If a gas leakage is found, do not touch the product or power plug.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. z ! If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver. -_! Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
Before Using the Product Exercise caution when adjusting the product angle or stand height. ! z Otherwise, children's fingers or hands may become stuck and injured. z Tilting the product excessively may cause it to fall and result in personal injury. Do not place heavy objects on the product. z Product failure or personal injure may result. When using headphones or earphones, do not turn the volume too high. z Having the sound too loud may damage your hearing.
1 1.1 Preparations Checking the Contents 1.1.1 Checking the Components z Contact the dealer from whom you purchased the product if any item is missing. z The appearance of the components and items sold separately may differ from the image shown. Components Quick setup guide Warranty card User manual (optional) (Not available in some locations) Power cable DVI cable (optional) HDMI cable (optional) HDMI-DVI cable (optional) DP cable (optional) USB 3.
1 1.2 Preparations Parts 1.2.1 Frontal Button The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Function Key Guide MENU MENU SOURCE SOURCE PIP/PBP PIP/PBP Icons Description The Eco Light Sensor feature optimizes the view condition and contributes to power saving by adjusting the screen brightness depending on the ambient light intensity. Open or close the onscreen display (OSD) menu, or return to the parent menu.
1 Preparations Icons Description Move to the upper or lower menu or adjust the value for an option on the OSD menu. Adjust the screen brightness, contrast and volume. Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (DVI/HDMI/DisplayPort). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 1 1 2 2 3 4 3 4 Port Description Connect the power cord for your monitor to the [POWER IN] port on the back of the product. Connects to a source device via a DVI cable. Connect to a source device using an HDMI cable. Connects to a PC using a DP cable. Connects to a PC using a USB cable. This port can only connect to a PC.
1 Preparations Port Description Connect to a USB device. Compatible with a USB cable version 3.0 or lower. High-speed charging is possible using the [ 1] and [ 2] ports only. These ports charge devices faster than typical USB ports. The speed depends on the connected devices. Connect to an audio output device such as headphones. Connect to an audio-input source using an audio cable.
1 1.3 Preparations Installation 1.3.1 Attaching the Stand z Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. z The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Rotate the stand body about 90°.
1 Preparations 1.3.2 Installing a Wall-mount Kit or Desktop Stand The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Before Installation Power the product off and remove the power cable from the power socket. Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion.
1 Preparations Installing a Wall-mount Kit or Desktop Stand 1 2 A 3 4 B A Attach the wall-mount kit or desktop stand here B Wall-mount bracket (optional) Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall-mount kit or desktop stand you want to attach. Notes z Using a screw longer than the standard length can damage the internal components of the product.
1 Preparations 1.3.3 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -5° (±2°) ~ 20° (±2°) 0 ~ 130 mm (±2 mm) z The monitor tilt and height can be adjusted. z Hold the top center of the product and adjust the height carefully. 1.3.4 Rotating the Monitor Screen You can rotate your monitor as shown below. 1 2 3 4 5 6 z Adjust the screen following the arrow direction.
1 Preparations 1.3.5 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
1 1.4 Preparations "MagicRotation Auto" The "MagicRotation Auto" function detects the rotation of monitors that are fitted with a rotation sensor and rotates the Windows screen accordingly. [Software Installation] 1 2 Insert the user manual CD provided with the product into the CD-ROM drive. Follow the instructions given on the screen to proceed with installation. After installation, the application menu language will be displayed in the language of the operating system.
1 1.5 Preparations Rotating the monitor When rotating the monitor, the rotation angle is displayed on the monitor screen. 0° 90° The on-screen display (OSD) menu items will automatically rotate when the screen rotates. MENU MENU SOURCE PIP/PBP SOURCE PIP/PBP [Caution] 1 If the "MagicRotation Auto" software is not installed on the monitor, contents on the screen cannot be rotated. The OSD can still rotate by 90° and display properly.
2 2.1 Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints z Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. z Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. z 2.2 Check the types of ports at the back of the product you want to connect.
2 Connecting and Using a Source Device 2.2.2 Connection Using the DVI-HDMI Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. DVI IN 1 2 Connect the HDMI-DVI cable to the [DVI IN] port on the back of the product and the HDMI port on the PC. Press [ ] to change the input source to DVI.
2 Connecting and Using a Source Device 2.2.4 Connection Using the HDMI-DVI Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. HDMI IN 1 2 Connect the HDMI-DVI cable to the [HDMI IN] port on the back of the product and the DVI port on the PC. Press [ ] to change the input source to HDMI. PC/AV Mode Select the PC/AV mode for the HDMI source.
2 Connecting and Using a Source Device 2.2.5 Connection Using the DP Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. DP IN 1 Connect one end of the DP cable to the [DP IN] port on the side of the product and the other end to the DP port on the PC. 2 Press [ ] to change the input source to DisplayPort. z If audio is supported, the Volume can be adjusted using the [ product.
2 Connecting and Using a Source Device 2.2.6 Connecting to Headphones or Speakers Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. AUDIO IN AUDIO OUT 1 Connect the stereo cable to the [AUDIO IN] port on the back of the product and the AUDIO OUT port on the PC. 2 Connect an audio output device such as headphones or speakers to [AUDIO OUT] on the product.
2 Connecting and Using a Source Device 2.2.7 Connecting the Power z z Connecting parts may differ in different products. z The exterior may differ depending on the product. To use the product, connect the power cable to a power outlet and the [POWER IN] port on the product. POWER IN The input voltage is switched automatically.
2 Connecting and Using a Source Device 2.2.8 Tidying Up the Connected Cables Remove the COVER-CABLE by Install the cables into the cable sliding it down with both hands in holder at the right side. the direction indicated by the arrow. Hold the COVER-CABLE and fix the cables into the grooves on the STAND-REAR. Hold the bottom of the stand Installation is finished. neck securely with your left hand and use the thumb of your right hand to slide up the COVERCABLE to fix it in place.
2 2.3 Connecting and Using a Source Device Connecting the Product to a PC as a USB HUB 2.3.1 Connecting a PC to the Product The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the PC. To use the product as a USB hub, connect the product to a PC using a USB cable. Connect the USB cable to [ ] on the back of the product and USB [ ] on the PC.
2 Connecting and Using a Source Device z High-speed charging is possible using the [ 1] and [ 2 ] ports only. These ports charge devices faster than typical USB ports. The speed depends on the connected devices. z Battery charging is possible in power-saving mode. However, it is not possible when the product is powered off. z Battery charging is not possible if the power cable is disconnected from the power socket. z Mobile devices should be purchased separately.
2 2.4 Connecting and Using a Source Device Driver Installation z You can set the optimum resolution and frequency for this product by installing the corresponding drivers. z An installation driver is contained on the CD supplied with the product. z If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
2 2.5 Connecting and Using a Source Device Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting.
3 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. 3.1 Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. z SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. z This menu is not available when Eco Light Sensor or Eco Saving is set to On. 3.1.
3 3.2 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. z SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z This menu is not available when Game Mode is enabled. z This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PBP Mode). 3.2.
3 3.3 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. z SAMSUNG This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z SAMSUNG This menu is not available when MAGIC Upscale is in Mode1 or Mode2. z This menu is not available when Game Mode is enabled. z Not available when PIP/PBP Mode is set to On. 3.3.
3 3.4 Screen Setup Game Mode Configure the product screen settings for game mode. Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. Not available when PIP/PBP Mode is set to On. 3.4.1 Configuring Game Mode 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to Picture and press [ ] on the product.
3 3.5 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. z This menu is not available when Eco Light Sensor is enabled. z This menu is not available when Game Mode is enabled. z Not available when PIP/PBP Mode is set to On. You can customize the brightness to suit your preferences. 3.5.1 Configuring SAMSUNG MAGIC Bright 1 Press any button on the front of the product to display the Function Key Guide.
3 Screen Setup Picture 100 Brightness 75 Contrast 60 Sharpness Game Mode Dynamic Custom 50 SAMSUNG Standard SAMSUNG Movie Off 2200 Custom Wide 0 MAGIC Bright MAGIC Upscale Color Set to an optimum picture quality suitable for the working environment. Off 50 When the external input is connected through DVI/HDMI/DP and PC/AV Mode is set to AV, SAMSUNG MAGICBright has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the factory.
3 3.6 Screen Setup SAMSUNG MAGIC Upscale SAMSUNG MAGICUpscale function can enhance the layers of the picture details and the vividness of the picture. z The function has more obvious effects on low-resolution pictures. z SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z This menu is not available when Game Mode is enabled. 3.6.1 Configuring SAMSUNG MAGIC Upscale 1 Press any button on the front of the product to display the Function Key Guide.
3 3.7 Screen Setup Color A detailed description of each function is provided. Refer to your product for details. SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. z z This menu is not available when Game Mode is enabled. z Not available when PIP/PBP Mode is set to On. 3.7.1 Configuring Color 1 Press any button on the front of the product to display the Function Key Guide.
3 Screen Setup Warm 2: Set the color temperature to be warmer than Warm 1. Custom: Customize the color tone. When the external input is connected through DVI/HDMI/DP and PC/AV Mode is set to AV, Color Tone has four color temperature settings (Cool, Normal, Warm and Custom). z 4 5 Gamma: Adjust the middle level of luminance. Mode1 Mode2 Mode3 Press [ ] to move to the option you want and press [ ]. The selected option will be applied.
3 3.8 Screen Setup HDMI Black Level If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded picture quality using HDMI Black Level. z This function is only available in HDMI mode. z Not available when PIP/PBP Mode is set to On. 3.8.
3 3.9 Screen Setup Response Time Accelerate the panel response rate to make video appear more vivid and natural. It is best to set Response Time to Standard or Faster when you are not viewing a movie. 3.9.1 Configuring the Response Time 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to Picture and press [ ] on the product.
4 4.1 Screen Adjustment Image Size Change the picture size. This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PBP Mode). 4.1.1 Changing the Image Size 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to Screen and press [ ] on the product. Press [ ] to move to Image Size and press [ ] on the product. The following screen will appear.
4 Screen Adjustment 4 5 Press [ A digital output device is connected using the DVI/HDMI/DP cable. The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of these signals.). This can only be set when the external input is connected through DVI/HDMI/DP and PC/AV Mode is set to AV. ] to move to the option you want and press [ ]. The selected option will be applied.
4 4.2 Screen Adjustment H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. z This menu is only available when Image Size is set to Screen Fit in AV Mode. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to adjust horizontal position in 0-6 levels. z Not available when PIP/PBP Mode is set to On. 4.2.
4 4.3 Screen Adjustment PIP/PBP The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed on the main screen at the same time the another source device is displayed in inset windows. The PBP (Picture by Picture) function separates the screen in half displaying output from two different source devices simultaneously on the left and right sides of the screen. z Compatible with Windows7 and Windows8.
4 Screen Adjustment 4.3.1 Configuring PIP/PBP Mode Enable or disable the PIP/PBP function. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Screen and press [ ] on the product. Press [ ] to move to PIP/PBP and press [ Press [ ] to move to PIP/PBP Mode and press [ ] on the product. ] on the product. The following screen will appear.
4 Screen Adjustment 4.3.2 Configuring Size Select the size and aspect ratio of the sub-screen. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Screen and press [ Press [ ] to move to PIP/PBP and press [ Press [ ] to move to Size and press [ ] on the product. ] on the product. ] on the product. The following screen will appear.
4 Screen Adjustment 4.3.3 Configuring Position Select the position of the sub-screen from the available options. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Screen and press [ ] on the product. Press [ ] to move to PIP/PBP and press [ ] on the product. Press [ ] to move to Position and press [ ] on the product. The following screen will appear.
4 Screen Adjustment 4.3.4 Configuring Sound Source Set which screen you want to hear the sound for. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Screen and press [ ] on the product. Press [ ] to move to PIP/PBP and press [ Press [ ] to move to Sound Source and press [ ] on the product. ] on the product. The following screen will appear.
4 Screen Adjustment 4.3.5 Configuring Source Select the source for each screen. PIP 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Screen and press [ ] on the product. Press [ ] to move to PIP/PBP and press [ Press [ ] to move to Source and press [ ] on the product. ] (available in PIP mode (Size / )). The following screen will appear.
4 Screen Adjustment PBP 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Screen and press [ ] on the product. Press [ ] to move to PIP/PBP and press [ Press [ ] to move to Source and press [ ] on the product. ] (available in PBP mode (Size )). The following screen will appear. PIP/PBP Select the source for each screen.
4 Screen Adjustment 4.3.6 Configuring Image Size Select the image size for sub-screen. PIP 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Screen and press [ ] on the product. Press [ ] to move to PIP/PBP and press [ Press [ ] to move to Image Size and press [ ] on the product. ] (available in PIP mode (Size / )). The following screen will appear.
4 Screen Adjustment In AV mode PIP/PBP 2Q PIP/PBP Mode Select the image size for each screen. Size Position Sound Source z Source 4:3 Image Size 16:9 Contrast Screen Fit 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. z 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9. z Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting anything off.
4 Screen Adjustment PBP 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Screen and press [ ] on the product. Press [ ] to move to PIP/PBP and press [ Press [ ] to move to Image Size and press [ ] on the product. ] (available in PBP mode (Size )). The following screen will appear. PIP/PBP 2Q PIP/PBP Mode Select the image size for each screen.
4 Screen Adjustment In AV mode Image Size Apply 16:9 16:9 Cancel z 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. z 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9. z Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting anything off. 5 6 z The function may not be supported depending on the ports provided with the product.
4 Screen Adjustment 4.3.7 Configuring Contrast PIP Adjust the contrast level for sub-screen. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Screen and press [ ] on the product. Press [ ] to move to PIP/PBP and press [ ] on the product. Press [ ] to move to Contrast and press [ ] (available in PIP mode (Size / )). The following screen will appear.
4 Screen Adjustment PBP Adjust the contrast level for each screen. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Screen and press [ ] on the product. Press [ ] to move to PIP/PBP and press [ ] on the product. Press [ ] to move to Contrast and press [ ] (available in PBP mode (Size )). The following screen will appear.
5 5.1 Coordinating OSD A detailed description of each function is provided. Refer to your product for details. Language Set the menu language. z A change to the language setting will only be applied to the onscreen menu display. z It will not be applied to other functions on your PC. 5.1.1 Configuring Language 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
5 5.2 Coordinating OSD Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.2.1 Configuring Display Time 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
5 5.3 Coordinating OSD Transparency Set the transparency for the menu windows. 5.3.1 Changing Transparency 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to Options and press [ Press [ ] to move to Transparency and press [ ] on the product. ] on the product. The following screen will appear. Options English Language Configure the transparency of the menu windows.
6 6.1 Setup and Reset A detailed description of each function is provided. Refer to your product for details. ECO The Eco Light Sensor and Eco Saving options are displayed on the same menu page so that you can conveniently configure the power saving settings. 6.1.1 Eco Light Sensor The Eco Light Sensor feature optimizes the view condition and contributes to power saving by adjusting the screen brightness depending on the ambient light intensity.
6 Setup and Reset Configuring Sensitivity 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Settings and press [ Press [ ] to move to ECO and press [ Press [ ] to move to Sensitivity and press [ ] on the product. ] on the product. ] on the product. The following screen will appear. ECO Select the sensitivity of ECO light sensor.
6 Setup and Reset Configuring Brightness Level 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Settings and press [ ] on the product. Press [ ] to move to ECO and press [ Press [ ] to move to Brightness Level and press [ ] on the product. ] on the product. The following screen will appear. ECO On Eco Light Sensor Select the brightness level of ECO light sensor.
6 Setup and Reset 6.1.2 Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. z SAMSUNG This menu is not available when MAGIC Bright is in Dynamic Contrast mode. z This menu is not available when Game Mode is enabled. z This menu is not available when Eco Light Sensor is set. Configuring Eco Saving 1 Press any button on the front of the product to display the Function Key Guide.
6 Setup and Reset 6.1.3 Eco Icon Display Configuring Eco Icon Display 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Settings and press [ ] on the product. Press [ ] to move to ECO and press [ Press [ ] to move to Eco Icon Display and press [ ] on the product. ] on the product. The following screen will appear. ECO Off Eco Light Sensor Select the ECO Icon mode.
6 6.2 Setup and Reset USB Super Charging Charge the battery of a connected source device quickly using the USB 3.0 port on the product. z Setting USB Super Charging to On during a data transfer will stop the data transfer. If you set USB Super Charging to Off, the standard charging and data transfer feature will be available. z High-speed charging is possible using the [ 1] and [ 2 ] ports only. These ports charge devices faster than typical USB ports. The speed depends on the connected devices. 6.2.
6 Setup and Reset 5 6 z Off: Disable USB Super Charging. z On: Enable the function to quickly charge a source device connected to the USB 3.0 port. Press [ ] to move to the option you want and press [ ]. The selected option will be applied.
6 6.3 Setup and Reset DisplayPort Ver. Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2. z Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications. z If the monitor (when set to DVI, HDMI or DisplayPort) is in power saving mode or is displaying the message Check Signal Cable, press the [ ] button to display the On Screen Display (OSD). You can select 1.1 or 1.2. 6.3.1 Configuring DisplayPort Ver.
6 6.4 Setup and Reset PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. z Supplied for the wide models only such as 16:9 or 16:10. z If the monitor (when set to DVI, HDMI or DisplayPort) is in power saving mode or is displaying the message Check Signal Cable, press the [ ] button to display the On Screen Display(OSD). You can select PC or AV. 6.4.
6 Setup and Reset PC/AV Mode Select the PC/AV mode for the HDMI source. DVI HDMI PC DisplayPort AV DVI PC PC/AV Mode PC DVI Select the PC/AV mode for the DisplayPort source. HDMI DisplayPort PC AV z Set to PC when connected to a PC. z Set to AV when connected to an AV device. z In order to hear the sound when connected to a PC with HDMI to DVI cable, please connect audio cable, and set PC/AV Mode to DVI PC. 5 6 Press [ ] to move to the option you want and press [ ].
6 6.5 Setup and Reset Source Detection You can activate Source Detection. Not available when PIP/PBP Mode is set to On. 6.5.1 Configuring Source Detection 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to Settings and press [ ] on the product. Press [ ] to move to Source Detection and press [ ] on the product. The following screen will appear.
6 6.6 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.6.1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to Settings and press [ ] on the product. Press [ ] to move to Key Repeat Time and press [ ] on the product. The following screen will appear.
6 6.7 Setup and Reset Off Timer You can set the product to automatically turn off. 6.7.1 Configuring Off Timer 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Settings and press [ ] on the product. Press [ ] to move to Off Timer and press [ ] on the product. Press [ ] to move to Off Timer and press [ ] on the product. The following screen will appear.
6 Setup and Reset 6.7.2 Configuring Turn Off After 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to Settings and press [ Press [ ] to move to Off Timer and press [ Press [ ] to move to Turn Off After and press [ ] on the product. ] on the product. ] on the product. The following screen will appear.
6 6.8 Setup and Reset Reset All Return all the settings for the product to the default factory settings. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.8.1 Initializing Settings (Reset All) 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 3 Press [ ] to move to Settings and press [ ] on the product.
7 7.1 Information Menu and Others A detailed description of each function is provided. Refer to your product for details. Information View the current input source, frequency and resolution. 7.1.1 Displaying Information 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Information. The current input source, frequency and resolution will appear.
7 7.2 Information Menu and Others Configuring Brightness, Contrast and Volume from the Initial Screen Adjust the Brightness, Contrast, Volume using the [ ] buttons when the initial screen (that displays no menu screen) is displayed. Brightness : z SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. z This menu is not available when Eco Light Sensor is enabled.
8 8.1 Installing the Software Easy Setting Box Easy Setting Box "Easy Setting Box" enables users to use the monitor by partitioning multiple sections. 8.1.1 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the "Easy Setting Box" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "Easy Setting Box" setup file on the CD-ROM. 3 4 When the Installation Wizard appears, click Next.
8 Installing the Software 8.1.2 Removing the Software Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs. Select "Easy Setting Box" from the program list and click the Add/Delete button.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue Issues The power LED is off. The screen will not switch on. Solutions Check that the power cable is connected properly. (Refer to "2.2 Connecting and Using a PC") The message Check Signal Cable appears. Check that the cable is properly connected to the product. (Refer to "2.2 Connecting and Using a PC") Check that the device connected to the product is powered on. Not Optimum Mode is displayed.
9 Troubleshooting Guide Issues There is no image on the screen and the power LED blinks every 0.5 to 1 second. Solutions The product is operating in power-saving mode. Press any key on the keyboard or move the mouse to return to normal operating mode. Sound issue Issues There is no sound. Solutions Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low. Adjust the volume.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. z Windows XP: Go to Control Panel Display Settings Appearance and Themes Advanced Monitor, and adjust Refresh rate under Monitor settings. z Windows ME/2000: Go to Control Panel Advanced Display Settings Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer z Windows XP: Go to Control Panel Display z Appearance and Themes Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. z Windows Vista: Go to Control Panel Appearance and Personalization Personalize Display Settings, and adjust the resolution.
10 Specifications 10.1 General Model Name Panel S32D850T Size 68.4 cm 81.2 cm Display area 596.7 mm (H) x 335.6 mm (V) 708.48 mm (H) x 398.52 mm (V) Pixel Pitch 0.2331 mm (H) x 0.2331 mm (V) 0.27675 mm (H) x 0.27675 mm (V) Power Supply Dimensions (W x H x D) / Weight S27D850T AC 100 - 240 V ~ (+/- 10 %), 50/60 Hz ± 3 Hz Without Stand 627.4 x 376.4 x 66.1 mm / 7.1 kg 741.3 x 441 x 68.5 mm / 9.4 kg With Stand MAX : 627.4 x 596.3 x 280 mm / 9.95 kg MAX : 741.3 x 630 x 280 mm / 12.
10 Specifications 10.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and controlling the power LED status if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a power-saving function.
10 Specifications 10.3 Standard Signal Mode Table z This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. z Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
10 Specifications Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1280 x 1024 79.976 75.025 135.000 +/+ VESA, 1440 x 900 55.935 59.887 106.500 -/+ VESA, 1600 x 900RB 60.000 60.000 108.000 +/+ VESA, 1680 x 1050 65.290 59.954 146.
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) LATIN AMERICA ARGENTINE 0800 333 3733 http://www.samsung.com.ar BOLIVIA 800-10-7260 http://www.samsung.
Appendix LATIN AMERICA GUATEMALA 1-800-299-0013 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) HONDURAS 800-27919267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) JAMAICA 1-800-234-7267 http://www.samsung.com NICARAGUA 001-800-5077267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com PANAMA 800-7267 http://www.samsung.
Appendix EUROPE CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 Praha 4 DENMARK 70 70 19 70 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com/ee FINLAND 030-6227 515 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com/fr GERMANY 0180 6 SAMSUNG bzw. http://www.samsung.com 0180 6 7267864* (*0,20 €/Anruf aus dem dt.
Appendix EUROPE SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902172678 http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.com/ch (German) http://www.samsung.com/ch_fr (French) U.K 0330 SAMSUNG (7267864) http://www.samsung.com CIS ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com BELARUS 810-800-500-55-500 http://www.samsung.
Appendix ASIA PACIFIC INDIA 1800 3000 8282 1800 266 8282 http://www.samsung.com/in INDONESIA 0800-112-8888 (Toll Free) (021) 56997777 http://www.samsung.com/id JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com/my NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com/nz PHILIPPINES 1-800-10-7267864 [PLDT] http://www.samsung.
Appendix MENA PAKISTAN 0800-Samsung (72678) http://www.samsung.com/pk/ QATAR 800-2255 (800-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 920021230 http://www.samsung.com/sa SYRIA 18252273 http://www.samsung.com/Levant (English) TUNISIA 80-1000-12 http://www.samsung.com/n_africa TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA BOTSWANA 8007260000 http://www.samsung.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. z z z If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. If a defect is caused by external environmental factors.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. USB HUB You can extend one USB interface to multiple USB interfaces that work independently. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen.
Appendix Vertical Frequency One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines. A vertical frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is also called "refresh rate" and affects screen flicker. Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail.
Index B K Before Connecting 30 Key Repeat Time 82 Brightness 41 L C Language 68 Checking the Contents 18 Color 48 Connecting and Using a PC 30 O Off Timer 83 Contact SAMSUNG WORLD WIDE 99 Contrast 42 Copyright 7 Correct Disposal 106 Correct posture to use the product 17 P Parts 19 PC/AV Mode 79 PIP/PBP 55 D Display Time 69 DisplayPort Ver.
Index T Terminology 107 Transparency 70 U USB Super Charging 76 Utilizing the Product as a USB HUB 37 Index 110
