MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 1 WIRELESS LCD TV LW15B13C Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 2
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 3 Contents ◆ CONNECTING AND PREPARING YOUR TELEVISION ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ View of Your Television ................................................................................ Notes on Base Station Installation................................................................. How to Install the Base Station...................................................................... Adjusting the Client Angle ................................................
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 4 Contents (continued) ◆ USING YOUR TELEVISION (continued) ■ ■ ■ Selecting the Power Saving........................................................................... Displaying Information ................................................................................... Setting the Wireless LAN............................................................................... 32 32 33 ◆ USING THE TELETEXT FEATURE ■ ■ ■ ■ ■ Teletext Feature ..............
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 5 View of Your Television Control Panels Using the Buttons on the Panel 5 4 3 2 1 6 7 8 1 1) Power On/Off 5) Input Source Selection 2) Channel Selection 6) Remote Control Sensor 3) Volume Adjustment 7) Standby Indicator 4) Menu Display 8) Wireless Signal Indicator ➢ Using the Buttons on the Panel If the remote control no longer works or you have lost it, you can use controls on the panel of the LCD TV to: ◆ Switch on the TV when it is in S
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 6 View of Your Television (continued) Connection Panels Side of the Client Rear of the Base Station DC Input Headphone connector 75Ω Coaxial Connector for Aerial/Cable/Satellte Network Rear of the Client SCART Audio/ Video Input/Output S-Video Input IR RELAY DC Input ➢ ☛ Audio/Video Input Video Input Audio Input S-Video Input For further details about connection, refer to pages 38~41.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 7 Notes on Base Station Installation ◆ The wireless signal is transmitted/received from the front and back of the Base Station using an internal antenna. ◆ Depending on the installation location of the Base Station and the Client, the Video signal may be unstable if the communication conditions are unstable.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 8 How to Install the Base Station ◆ The Base Station can be installed vertically or horizontally to best fit the installation location. Attach or detach the Stand to/from the Base Station using the screws on the bottom of the Base Station. ◆ Do not use screws other than those provided. Save the screws for future use if you remove. ◆ Do not place the Base Station on top of other devices. Do not stack other devices on top of the Base Station.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 9 Infrared Remote Control TELEVISION STAND-BY DIRECT CHANNEL SELECTION ONE/TWO-DIGIT CHANNEL SELECTION/TELETEXT PAGE HOLD VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF VOLUME DECREASE TUNER/CABLE NETWORK SELECTION SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED NEXT CHANNEL/ TELETEXT NEXT PAGE EXTERNAL INPUT SELECTION/ TELETEXT MODE SELECTION (LIST/FLOF) PREVIOUS CHANNEL/ TELETEXT PREVIOUS PAGE INFORMATION DISPLAY/ TELETEXT REVEAL MENU DISPLA
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 10 Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: ◆ Purchase the LCD TV ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 11 Switching Your Television On and Off The mains lead is attached to the rear of your Base Station. 1 Plug the mains lead into an appropriate socket. ➢ The main voltage is indicated on the rear of the Client/ Base Station and the frequency is 50 or 60Hz. 2 Press the “ 3 Press the “ ” button (On/Off) on the top panel of the Client or remote control. Result: ” button (On/Off) on the Base Station.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 12 Placing Your Television in Standby Mode Your television can be placed in Standby mode, in order to reduce: ◆ Power consumption The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1 Press the POWER ( Result: 2 The screen is turned off and the Standby indicator on the front of the client lights up. To switch the client back on, simply press the POWER ( again.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 13 Becoming Familiar with the Remote Control The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up the client using the on-screen menu system The following table presents the most frequently used buttons and their functions. Button to -/-- PRE-CH MUTE MENU EXIT TV Viewing Function Menu Function Used to display the next stored channel. - Used to display the previous stored channel.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 14 Plug & Play Feature When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. Plug & Play 1 Language English Deutsch Français Nederland Español Italiano Result: 2 † Move If the client is in Standby mode, press the POWER( the remote control.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 15 Choosing Your Language When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. 1 Press the MENU ( Result: 2 Press the ▼ or ▲ button to select Setup. Press the ENTER ( button. Result: 3 ) button. The main menu is displayed. ) The options available in the Setup group are displayed. Press the ▼ or ▲ button to select Language. Press the ENTER ( ) button.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 16 Storing Channels Automatically TV Channel Country Auto Store Manual Store Add/Delete Sort Name Fine Tune Move … √ :UK Schweiz √ Sverige √ UK √ Eastern Europe √ Others √ Enter 2 √ √ √ √ √ √ √ :UK Enter S44 ----0% Start Return Move 4 Select your country by pressing the ▼ or ▲ button.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 17 Sorting the Stored Channels This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep. 1 Press the MENU ( Result: 2 Channel Country Auto Store Manual Store Add/Delete Sort Name Fine Tune ) button. The main menu is displayed. Press the ▼ or ▲ button to select Channel. Press the ENTER ( ) button.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 18 Storing Channels Manually TV You can store up to 100 television channels, including those received via cable networks.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 19 Storing Channels Manually (continued) TV 10 If you know the number of the channel to be stored, see the following steps. ◆ Press the ▼ or ▲ button to select Channel. ◆ Press the ENTER ( Manual Store Programme Colour System Sound System Channel Search Store ) button. ◆ Press the ▼ or ▲ button to select C (Air channel) or S (Cable channel). Move : : : : : : Enter P17 ----√ AUTO √ BG C 26 507MHz ? Return ◆ Press the √ button.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 20 Skipping Unwanted Channels TV Channel Country Auto Store Manual Store Add/Delete Sort Name Fine Tune Move √ √ √ √ √ √ √ :UK Enter You can exclude the channels you chosen from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All of the channels that you do not specifically choose to skip are displayed during scanning. 1 Return Add/Delete Press the MENU ( Result: 2 ) button.
MONTE(BN68-00625A-01)_UK 4/20/04 08:26 PM Page 21 Assigning Names to Channels Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU ( Result: 2 Channel Country Auto Store Manual Store Add/Delete Sort Name Fine Tune ) button. The main menu is displayed. Press the ▼ or ▲ button to select Channel. Press the ENTER ( ) button.
MONTE(BN68-00625A-01)_UK 4/20/04 08:26 PM Page 22 Fine Tuning Channel Reception TV Channel Country Auto Store Manual Store Add/Delete Sort Name Fine Tune Move √ √ √ √ √ √ √ :UK Enter Return If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. 1 Result: 2 Fine Tune P11 The main menu is displayed.
MONTE(BN68-00625A-01)_UK 4/20/04 08:26 PM Page 23 Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU ( Result: 2 ) button. The main menu is displayed. TV Picture Mode Custom Colour Tone Size Press the ▼ or ▲ button to select Picture. Press the ENTER ( ) button. Move Result: Press the ENTER ( 4 Press the ▼ or ▲ button to select picture mode. Press the ENTER ( ) button Result: ) button again.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 24 Adjusting the Picture Settings TV Your television has several settings which allow you to control picture quality. Picture Mode Custom Colour Tone Size Move √ √ √ √ : Auto : Normal : Normal Enter 1 Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the ▼ or ▲ button to select Picture. Press the ENTER ( ) button.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 25 Selecting the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU ( Result: 2 TV Picture Mode Custom Colour Tone Size ) button. The main menu is displayed. : Auto : Normal : Normal Normal Zoom √ √ √ √ Press the ▼ or ▲ button to select Picture. Press the ENTER ( ) button. Move Result: 3 Press the ▼ or ▲ button to select Size. Press the ENTER ( button.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 26 Freezing the Current Picture You can freeze the picture when watching a television programme simply by pressing the “STILL” button. ➢ To return to normal viewing, press this button again. Changing the Sound Standard You can select the type of special sound effect to be used when watching a given broadcast.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 27 Selecting the Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 28 Selecting the Sound Mode The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual-I ” or “Stereo”, depending on the current transmission.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 29 Setting and Displaying the Current Time You can set the television’s clock so that the current time is displayed by pressing the “INFO ( )” button. You must also set the time if you wish to use the automatic on or off timers. ➢ 1 Press the MENU ( 3 Result: 4 Move The main menu is displayed. ) Time Clock Sleep Timer On Timer Off Timer Move --:-Off Off Off Enter Return TV ) button again. Clock Hour Result: Return ) button again.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 30 Setting the Sleep Timer TV You can select a time period of between 30 and 180 minutes after the Wireless LCD TV automatically switches to Standby mode. Setup Time Plug & Play Language Blue Screen Power Saving Wireless LAN Move : English : Off : Off Enter √ √ √ √ √ √ 1 Press the MENU ( Result: 2 Time --:-Off Off Off √ √ √ √ 3 Adjust Sleep Timer Minute Setup … 30 ) button again. The options available in the Time group are displayed.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 31 Switching the Television On and Off Automatically You can set the On/Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select TV ◆ Switch off automatically at the time you select ➢ 1 The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time” on the 29 page).
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 32 Selecting the Power Saving TV Setup Time Plug & Play Language Blue Screen Power Saving Wireless LAN Move : English : Off : Off On Enter Return √ √ √ √ √ √ The Power Saving mode reduces power consumption during use. While in Power Saving mode, the screen is slightly darker. If Power Saving has been turned On, the setting will remain until the Power is turned Off. 1 Press the MENU ( Result: 2 ) button. The main menu is displayed.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 33 Setting the Wireless LAN Adjust the Bit Rate for Signal Types and the Distance from the Base Station to the Client settings. If the video or the audio signal is intermittent or you experience interference, choose another channel. 1 Press the MENU ( Result: 2 3 The main menu is displayed. ) The options available in the Setup group are displayed. 5 Press the ENTER ( ) button again to select Bit Rate.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 34 Teletext Feature Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram). Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 35 Selecting a Page by Number You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result: 2 The current page counter is incremented and the page is then displayed. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 36 Using FLOF to Select a Page The various topics included in the teletext pages are color-coded, and can be selected by pressing the colored buttons on the remote control. 1 Display the teletext contents page by pressing the TTX/MIX ( ) button. 2 Press the coloured button corresponding to the topic that you wish to select the available topics are given on the status line.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 37 Viewing an External Signal Source Use the remote control to switch between viewing signal from connected equipment, such as VCR, DVD, Set-Top-boxs and the TV source (broadcast or cable). 1 Press the MENU ( Result: 2 3 4 ➢ 5 Move Enter TV The options available in the Source List group are displayed.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 38 Connecting to the External Input/Outputs ➢ 1 ” is used for the equipment with an RGB output, “ such as video game devices or video disc players.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 39 Connecting to the RCA Input ➢ The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment, such as camcorders, video disc players, and some video game devices. Camcorder Rear of the Client/ Base Station Video game device Video disc player Connecting to the S-Video Input ➢ ➢ The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 40 Connecting Headphones Side of the Client You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room. 1 Plug a set of headphones into the 3.5 mm mini-jack socket of the television. Result: 2 The sound is heard through the headphones. When you wish to hear the sound through the speakers again, simply disconnect the headphones.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 41 Connecting the Power Adapter and Recharging the Battery Pack ◆ ◆ The Battery Pack is recharged using the adapter. Properly mount the Battery Pack before recharging. When the Power Adapter is connected, the Battery Pack is not required for playback. Battery Pack Rear of the Client ③ ② ① ① Plug the AC power cord into a wall outlet. ② Plug the AC cord into the adapter jack. ③ Plug the DC cord from the Adapter into the DC power jack on the LCD TV.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 42 Using the Battery Pack ◆ Fully discharge the Battery Pack before recharging to prolong the lifetime of the Battery Pack. ◆ The Battery Pack might be hot during use or recharging. This is normal, not a defect of the Battery Pack. ◆ Properly mount the Battery Pack to avoid any problems. ◆ Charging the battery in a cold environment may require more time.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 43 SCART Connector Wiring (EXT1, EXT2 or EXT3) If you wish to connect other equipment via the SCART connectors on your television, contact your dealer or a qualified technician to wire the A/V cable as illustrated below.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 44 Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the “ ” button (On/Off) and the POWER ( ) button.
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 45 Technical and Environmental Specifications Model LW15B13C Panel Size Display Size Type Pixel Pitch Viewing Angle 15” Diagonal 304.1(H) x 228.1(V) mm a-si TFT active matrix 0.297 (H) x 0.297 (V) mm 140/115 (H/V) Power Supply Input Output AC 100 ~ 250V, (50Hz / 60Hz) DC 14V/4.5A Power Consumption On Mode Stand By Client : 45 W Base Station : 12 W Client : 2 W Base Station : 2 W Dimensions (W x D x H) / Weight Client : 386 x 427 x 187 mm / 3.
MONTE(BN68-00625A-01)_UK 4/20/04 Memo English-46 08:27 PM Page 46
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 47 Memo English-47
MONTE(BN68-00625A-01)_UK 4/20/04 08:27 PM Page 48 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
