User Manual

English-17
Storing Channels Manually
7 If you know the channel number to be stored, press the P or P
button to select the Channel. Indicate the required number by
pressing the
-
or
+
button.
If you do not know the channel numbers, press the
P or P
button to select the Search.
Start the search by pressing the
-
or
+
button.
Result
: The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
8 To assign a programme number to a channel, select the Program by
pressing the
P or P button.
Press the
-
or
+
button to find the correct number.
9 Press the P or P button to select the LNA .(LW40A13W)
Select the On by pressing the
-
or
+
button .
Result: Amplifies signals when antenna reception is poor.
However if incoming signals are interfering with each
other, turn off LNA as it may malfuction.
10 Press the P or P button to select the Store .
Select the OK by pressing the
-
or
+
button .
Result: The channel and associated programme number are
stored.
11 Repeat Steps 7 to 9 for each channel to be stored.
Channel
Colour system AUTO
Sound system BG
Search 0MHz
Channel C 1
Program P 1
LNA Off
Store ?
Channel
Colour system AUTO
Sound system BG
Search 0MHz
Channel C 1
Program P 1
LNA Off
Store ?
Channel
Colour system AUTO
Sound system BG
Search 0MHz
Channel C 1
Program P 1
LNA ON
Store ?
Channel
Colour system AUTO
Sound system BG
Search 0MHz
Channel C 1
Program P 1
LNA ON
Store ?
apollo_en 1/10/03 10:53 AM Page 17