User Manual

English-21
Changing the Picture Standard
Adjusting the Picture Settings
You can select the type of picture which best corresponds to your
viewing requirements.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the P or P button to select the Picture.
Result
: The options available in the Picture group are displayed.
➣
You can also display simply by pressing the P.MENU
(Picture Menu) button.
3 Press the
-
or
+
button.
Result
: The Mode is selected.
4 Select the required picture effect by pressing the
-
or
+
button repeatedly. The following picture effects are available:
Dynamic - Standard - Movie - Custom
➣
You can also set these options simply by pressing the P.STD
(Picture Standard) button.
➣
On the Picture menu, i f you change the Contrast, Brightness,
Sharpness, Colour or Tint (NTSC only) settings, the Custom is
selected automatically.
Your set has several settings which allow you to control picture quality.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the P or P button to select the Picture.
Result
: The options available in the Picture group are displayed.
3 Press the
-
or
+
button.
4 Select the option (Contrast, Brightness, Sharpness, Colour or
Tint-NTSC only) to be adjusted by pressing the P or P
button. Press the
-
or
+
button.
Result
: The horizontal bar is displayed.
5 Press the
-
or
+
button to reach the required setting.
6 Press the P or P button to select the Colour tone. Select the
required option by pressing the the
-
or
+
button repeatedly.
The following options are available:
Cool2 - Cool1 - Normal - Warm1 - Warm2.
➣
If you make any changes to these settings, the picture standard is
automatically switched to Custom.
Picture
Mode Custom
Contrast
Brightness
Sharpness
Colour
Colour tone Normal
Picture
Mode Custom
Contrast
Brightness
Sharpness
Colour
Colour tone Normal
Contrast
70
Picture
Mode Custom
Contrast
Brightness
Sharpness
Colour
Colour tone Normal
apollo_en 1/10/03 10:53 AM Page 21