User Manual

You can enjoy Digital sound when the equipment with Digital output
is connected to the television.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the P or P button to select the Sound.
Result
: The options available in the Sound group are displayed.
3 Press the
-
or
+
button.
4 Press the P or P button to select the Dolby Digital.
Press the
-
or
+
button.
Result
: The Dolby Digital menu is displayed with the
Pro Logic is selected.
5 Select the option (Auto, On or Off) by pressing the
-
or
+
button.
➢
For further details of output depending on the each options,
refer to following page.
6 Press the P or P button to select the Dynamic range. If you
wish to adjust the volume properly during night viewing, select the
On
by pressing the
-
or
+
button.
7 Press the P or P button to select the Speaker setting.
Press the
-
or
+
button.
Result
: The Speaker Setting menu is displayed with the main
left speaker is selected.
8 Select the speaker (Left, Center, Right, Right Rear, Left Rear,
Woofer) to be adjusted by pressing the P or P button.
9 Depending on the speaker, the following settings can be adjusted to
suit your personal preferences.
◆ Test tone to simulate the volume (On or Off)
◆ Size (Large, Small or Off)
◆ Volume level (-10dB ~ 10dB)
◆ delay time of surround channel (0 ~ 15ms) : When the Right
Rear
or Left Rear is selected, you can adjust.
English-26
Setting the Dolby Digital (LW40A13W)
Sound
Mode Custom
Bass
Treble
Ext. audio
Audio out Volume
Int. mute Off
Dolby Digital
Sound
Pro Logic : On
Dynamic range : Off
Speaker set
Sound
Pro Logic : On
Dynamic range : On
Speaker set
Sound
Pro Logic : On
Dynamic range : On
Speaker set
Sound
Left
Test tone
On
Size :
Large
Volume:
0dB
Delay :
Rear of the TV
apollo_en 1/10/03 10:53 AM Page 26