User Manual
English-46
Technical and Environmental Specifications
Model LW29A13W LW40A13W
Audio Characteristics
Audio Input RCA Jack (L, R), 0.5Vrms (-9dB)
Audio Input (PC) 3.5Ø Stereo Jack, 0.5Vrms (-9dB)
Audio Output RCA Jack (L, R), 0.5Vrms (-9dB)
Speaker Output Max. 10W Output (3.5Ø Stereo Jack, 8Ω)
Headphone Output Max. 10mW Output (3.5Ø Stereo Jack, 32Ω)
Frequency RF: 80Hz ~ 15kHz (at- 3dB)
Response A/V: 80Hz ~ 20kHz (at- 3dB)
Display Modes
If the signal from the system equals to the standard signal mode, the screen is adjusted automatically.
If the signal from the system doesn’t equal to the standard signal mode, adjust the mode with referring
to the Video card user guide because the screen might not display or only the power LED might be on.
For the display modes listed below, the screen image has been optimized during manufacture.
Mode Resolution Horizontal Vertical Pixel Clock Sync Polarity
Frequency (kHz) Frequency (Hz) Frequency (MHz) (H/V)
IBM 640 x 480 31.469 59.940 25.175
-
/
-
640 x 480 35.000 66.667 30.240
-
/
-
VESA 640 x 480 37.861 72.809 31.500
-
/
-
640 x 480 37.500 75.000 31.500
-
/
-
IBM 720 x 400 31.469 70.087 28.322
-
/ +
VESA 800 x 600 37.879 60.317 40.000
+ / +
800 x 600 48.077 72.188 50.000
+ / +
800 x 600 46.875 75.000 49.500
+ / +
IBM 832 x 624 49.726 74.551 57.284
-
/
-
VESA 1024 x 768 48.363 60.004 65.000
-
/
-
1024 x 768 56.476 70.069 75.000
-
/
-
1024 x 768 60.023 75.029 78.750
+ / +
GTF 1280 x 768 47.700 60.000 80.136
-
/
-
apollo_en 1/10/03 10:53 AM Page 46