User Manual

English-9
Viewing the Connection Panel
Connecting Digital Audio Inputs
Connect RCA audio cables to a equipment with a digital output (to take digital sound).
Connecting Speakers (depending on the model)
or
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1 Check that all the necessary connections have been made (refer to
pages 8 and 9 for further details).
2 Switch your set on and if necessary, press the VIDEO button
repeatedly. The input sources are displayed in the following order:
TV - VIDEO - S-VIDEO - Ext1 - Ext2 - PC Analog - PC Digital.
➣
To watch television programme again, press the TV button.
Mount the brackets on the speaker
and your set.
Connect the speaker and your set
using screws.
Connect the speaker audio cable to the external
speaker output jack on the rear of your set making
sure that the
+, - polarities are correctly aligned.
➢
The speakers MUST have more than
7watts rating (impedance 8Ω).
6
7
apollo_en 1/10/03 10:53 AM Page 9