High Performance Notebook Computer User Guide

59
To insert a PC card
1
Insert a PC card into the PC card slot on the side of
thecomputer.
2
 Ifyouinsertacardintotheslot,Windowsrecognizes
the card automatically or a message telling
youtoinstalladriverappears.Ifthecardisnot
automaticallyrecognized,installthedevicedriver
suppliedwiththecard.
Note
If a window asking whether you want to scan and
changeappears,clickonContinueWithoutScan.
ThiswillproceedtoStep2above.
To remove a card
1
 Double-clicktheSafelyRemoveHardwareicon( )
onthetaskbar.
2
 SelectthePCcardtoberemovedandclickStop.
3
If the Stop a Hardware devicewindowappears,
click the OKbutton.
4
Push the EjectbuttonofthePCcardslotlightly.
Then the Ejectbuttonpopsup.
5
Press the Ejectbuttonfullytoejectthecard.
Example) PC Card
PC Card Slot
YoucaninsertandusevariousPCcardsusingthePCcardslot.
ThiscomputerprovidesonePCcardslotsupportingthe16/32bittype.
Before You Start!
■
RemovethedummycardinstalledtoprotectthePCcardslotrst.LightlypushtheEjectbuttonofthePCcardslot.
TheEjectbuttonpopsup.PresstheEjectbuttonfullytoejectthedummycard.
■
ThePCcardslotdoesnotsupporttheZVandPCcardIIItypes.
Eject Button