User Manual

10 English
Problem Cause Action
The interior light
is dim or does not
turn on.
The door has been left open for a long
time.
The interior light may automatically
turn off when the Eco function
operates. Close and reopen the door or
touch the STOP/CLEAR button.
The interior light is covered by foreign
matter.
Clean the inside of the oven and check
again.
A beeping sound
occurs during cooking.
If the Auto Cook function is being used,
this beeping sound means it’s time to
ip the food.
After turning over the food, touch
the START button again to restart
operation.
The oven is not level.
The oven is installed on an uneven
surface.
Make sure the oven is installed on at,
stable surface.
There are sparks
during cooking.
Metal containers are used during
cooking or thawing.
Do not use metal containers.
When power is
connected, the oven
immediately starts to
work.
The door is not properly closed. Close the door and check again.
There is electricity
coming from the oven.
The power source or power outlet is
not properly grounded.
Make sure the power source and power
outlet are properly grounded.
There is water
dripping.
Water or steam may be generated
by the cooking or defrosting process,
depending on the food. This is not an
oven malfunction.
Let the oven cool and then wipe with a
dry dish towel.
There is steam
through a crack in the
door.
Water or steam may be generated
by the cooking or defrosting process,
depending on the food. This is not an
oven malfunction.
Let the oven cool and then wipe with a
dry dish towel.
There is water left in
the oven.
Water or steam may be generated
by the cooking or defrosting process,
depending on the food. This is not an
oven malfunction.
Let the oven cool and then wipe with a
dry dish towel.
The brightness inside
the oven varies.
Brightness changes depending on
power output changes according to
function.
Power output changes during cooking
are not malfunctions. This is not an
oven malfunction.
Problem Cause Action
Cooking is nished,
but the cooling fan is
still running.
To ventilate the oven, the cooling fan
continues to run for about 3 minutes
after cooking is complete.
This is not an oven malfunction.
Touching the START
button operates the
oven.
This happens when the oven was not
operating.
The microwave oven is designed to
start operating when you touch the
START button if it was not operating.
Turntable
While turning, the
turntable comes out of
place or stops turning.
There is no roller ring, or the roller ring
is not properly in place.
Install the roller ring and then try
again.
The turn table drags
while turning.
The roller ring is not properly in place,
there is too much food, or the container
is too large and touches the inside of
the microwave.
Adjust the amount of food. Do not use
containers that are too large.
The turn table rattles
while turning and is
noisy.
Food residue is stuck to the bottom of
the oven.
Remove any food residue stuck to the
bottom of the oven.
Replacement Parts and Cleaning Supplies
Following is a list of available parts and supplies which may be purchased separately. Please refer to the
cover for contact and model identication information.
Replacement Parts
• Ceramic enamel tray
• Grease lter
• Wire rack (Low, High)
• Glass tray
• Charcoal lter
• Cavity light lamp
• Roller guide ring
• Exhaust adaptor
• Cooktop light lamp (LED)
Cleaning Supplies
• Heavy Duty Degreaser • All-Purpose Appliance Cleaner • Stainless Steel Cleaner and Polish
200602_MC17T8000CS_ME8000T_DE68-04568B-00_EN.indd 10 2020-06-02 �� 2:45:13