Wireless-UG.book Page 3 Friday, August 13, 2010 10:32 AM Wireless Network Install Guide 1. Your machine is a network compatible machine. To enable your machine to work with your network you will need to perform some configuration procedures. Before you begin the wireless configuration procedure, make sure you have the following: • • A wireless router (access point) already connected to, and configured for, your network. The Printer Software CD-ROM provided with your machine.
Wireless-UG.book Page 4 Friday, August 13, 2010 10:32 AM Using a wireless network Choosing your network connection Typically, you can only have connection type between your computer and the machine at a time. There are two types of network connections to consider.
Wireless-UG.book Page 5 Friday, August 13, 2010 10:32 AM Wireless network name and Network Key Wireless networks require higher security, so when an Access Point is first set up, a network name (SSID), the type of security used, and a Network Key are created for the network. Locate this information before proceeding with the machine installation. Infrastructure mode wireless networksThis is an environment generally used for homes and SOHOs.
Wireless-UG.book Page 15 Friday, August 13, 2010 10:32 AM Setting a wireless network with network cable Your machine is a network compatible machine. To enable your machine to work with your network you will need to perform some configuration procedures. Refer to your network administrator, or the person that set up your wireless network, for information about your network configuration. Items to prepare Ensure you have next items ready.
Wireless-UG.book Page 16 Friday, August 13, 2010 10:32 AM Starting the program 1. 2. 3. Connect your machine to the network with a network cable. Turned on the machine. From the Windows Start menu, select All Programs > Samsung Printers > SetIP > SetIP. 4. Click on the icon (third from left) in the SetIP window to open the TCP/IP configuration window. Enter the machine’s new information into the configuration window as follows.
Wireless-UG.book Page 17 Friday, August 13, 2010 10:32 AM 3. Double click the file and Safari will automatically open, then select Trust. The browser will open the SetIPApplet.html page that shows the machine’s name and IP address information. 4. Click on the icon (third from left) in the SetIP window to open the TCP/IP configuration window. Enter the machine’s new information into the configuration window as follows.
Wireless-UG.book Page 18 Friday, August 13, 2010 10:32 AM 7. Select the one Network Name(SSID) in the list. • SSID: SSID (Service Set Identifier) is a name that identifies a wireless network. Access points and wireless devices attempting to connect to a specific wireless network must use the same SSID. The SSID is case-sensitive. 8. Click Next. 9. If wireless security setting window appears, enter the registered password (network key) and click Next.
Wireless-UG.book Page 19 Friday, August 13, 2010 10:32 AM Connecting Failure - General Connection Error • Your computer is not receiving a signal form your machine. Check the USB cable and your machine power. Connecting Failure - Connected Wired Network • Your machine is connected with wired network cable. Remove the wired network cable from your machine. PC Connection Error • - The configured network address is unable to connect between your computer and machine.
Wireless-UG.book Page 20 Friday, August 13, 2010 10:32 AM • • • Check whether the machine is within the range of the wireless network. Check whether the machine is located away from obstacles that could block the wireless signal. Remove any large metal objects between the access point (or wireless router) and the machine. Make sure the machine and wireless access point (or wireless router) are not separated by poles, walls, or support columns containing metal or concrete.
Wireless-UG.book Page 21 Friday, August 13, 2010 10:32 AM 3. WPA-Enterprise, WPA2-Enterprise WPA(WPA2)-Enterprise is an authentication method to use IEEE802.1x standard based on an additional EAP(Extensible Authentication Protocol). WPA(WAP2)-Enterprise authorizes and identifies users based on an authentication server called RADIUS(Remote Authentication Dial In User Server). • WPA(WPA2)-Enterprise configuration is supported through a network cable.
Rev. 1.