® Sprint PCS Service SM Sprint Power Vision Multimedia Phone ® MM-A940 by Samsung www.sprint.com © 2005 Sprint Nextel. All rights reserved. No reproduction in whole or in part without prior written approval. Sprint, the “Going Forward” logo, the NEXTEL name and logo, and other trademarks are trademarks of Sprint Nextel. Printed in South Korea.
YI26.
Table of Contents Welcome to Sprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Your Phone’s Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Section 1: Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Getting Started With Sprint PCS Service . . . . . . . . . . . .
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Call Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 2C. Setting Your Phone’s Security . . . . . . . . . . . . . . . . . . . . 67 Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Using Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Lock Service . . . . . . . . . . . . . . . . .
Selecting a Ringer Type for an Entry . . . . . . . . . . . . . . . . . . . . . . . . . 96 Dialing Sprint PCS Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 2G. Using the Phone’s Scheduler and Tools . . . . . . . . . . . . 99 Using Your Phone’s Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Using Your Phone’s Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Using Your Phone’s Memo Pad . . . . . . . . . . . . . . . . . . . . . . . .
2K. Using Your Phone’s Built-in Media Player . . . . . . . . . 161 Your Multimedia Channel Options . . . . . . . . . . . . . . . . . . . . . . . . . 162 Accessing Your Media Player's Channel Listings . . . . . . . . . . . . 163 Playing a Video or Audio Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 Multimedia FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 2L. Using Bluetooth® Wireless Technology . . . . . . . . . . .
3C. Sprint Power VisionSM . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Getting to Know Sprint Power Vision . . . . . . . . . . . . . . . . . . . . . . 224 Exploring the Sprint Music StoreSM . . . . . . . . . . . . . . . . . . . . . . . . . 225 Personalizing Your Service With On Demand . . . . . . . . . . . . . . . 229 Using Your Sprint PCS Phone as a Modem . . . . . . . . . . . . . . . . . . 232 3D. Sprint PCS Voice CommandSM . . . . . . . . . . . . . . . . . . . .
Welcome to Sprint Sprint is committed to bringing you the best wireless technology available. We built our complete, nationwide network from the ground up, so all your services – whether it’s Voicemail, Caller ID, email, or Sprint PCS Picture Mail – will work the same wherever you go on the Nationwide Sprint PCS Network. This guide will familiarize you with our technology and your new Sprint PCS Phone through simple, easy-to-follow instructions.
Introduction This Phone Guide introduces you to Sprint PCS Service and all the features of your new phone. It’s divided into four sections: ⽧ Section 1: Getting Started ⽧ Section 2: Your Sprint PCS Phone ⽧ Section 3: Sprint PCS Service Features ⽧ Section 4: Safety and Warranty Information Throughout this guide, you'll find tips that highlight special shortcuts and timely reminders to help you make the most of your new phone and service.
Your Phone’s Menu The following list outlines your phone’s menu structure. For more information about navigating through the menus, please see “Navigating Through Phone Menus” on page 28.
MISSED ALERTS MUSIC MY CONTENT 1: Games 1: Get New Games 3: JAMDAT Bowling 2 Demo 5: Tetris Demo 2: My Content Manager Games 4: Ms.
5: VoiceSMS 6: IM & Email 1: Instant Msg. 3: AOL 5: Yahoo! 7: Other 2: PCS Mail 4: MSN 6: Earthlink 7: Voicemail 1: Call Voicemail 2: Clear Envelope 8: Chat & Dating 9: Settings 1: General 1: Notification 1: Message & Icon 2: Icon Only 2: Preset Messages 1: Can’t talk right now. Send me a message. 2: Call me 3: Where are you? 4: Can you pick up 5: Meet me at 6: Let’s get lunch. 7: The meeting has been cancelled.
1: Save in Outbox (Yes/No) 3: Call Back # (None/xxxxxxxxxx/Other) 2: Priority (Normal/Urgent) 3: VoiceSMS Opt.
1: Intro 3: Chorus of Clocks 5: Latin Lady 7: Mixed up World 9: Flashback 2: Carribean Cruise 4: Dazed 6: Missing You 8: Dancing Puppets 10: Walking for Spring 2: Music 3: Voice Memo 4: My Content 1: Get New Ringers 2: My Content Manager Ringers 3: Video Ringer Preview - Simple Plan 3: Games and more 1: Games 1: Get New Games 3: JAMDAT Bowling 2 - Demo 5: Tetris Demo 2: My Content Manager Games 4: Ms.
5: Bluetooth 6: Planner 1: Today 3: Task List 2: Scheduler 4: Countdown 7: Memo Pad 8: World Time 1: Set DST 9: Alarm Clock 1: Alarm #1 3: Alarm #3 2: Alarm #2 0: Calculator *: Set Time (Displayed when there is no time information.) PICTURES 1: Camera Swivel the screen as directed on screen to enter the camera mode.
1: Off 4: Rabbit 7: Handcuff 10: Birthday 2: Pattern 5: Big Mouth 8: Halloween 11: Batman 3: Rose 6: Microphone 9: Cry 2: Sketch 5: Sepia 3: Emboss 6: Monochrome 2: Sunny 5: Fluorescent 3: Cloudy 6: Manual 2: Color Tones 1: Auto 4: Negative 6: Controls 1: Brightness 2: White Balance 1: Auto 4: Tungsten 3: Metering 1: Average 2: Spot 7: Settings 1: Auto Focus (On/Off) 2: Resolution 1: 2M 4: 640 2: 1M 5: 320 3: 800 3: Save To 1: Phone 2: Card 4: Quality 1: Fine 2: Normal 3: Economy 2: Sound
2: Camcorder (Video Mail/Long Video) Launch the Camcorder and press the options key located on the top right side of the handset to view the following options 1: Movie Light 1: Off 2: On This Movie 3: Always On 2: 5 sec 3: 10 sec 2: Warm 5: Aqua 8: Monochrome 3: Cool 6: Green 2: Self-Timer 1: Off 3: Color Tones 1: Auto 4: Antique 7: Sepia 4: White Balance 1: Auto 4: Tungsten 2: Sunny 5: Fluorescent 3: Cloudy 6: Manual 5: Settings 1: Save To 1: Phone 2: Card 2: Quality 1: Fine 2: Normal 3: V
6: Order Prints 7: Pictbridge Print 8: Settings and Info 1: Auto Save to 1: Phone 2: Memory Card 2: Account Info 3: View Mode 1: Portrait View 2: Landscape View CONTACTS 1: Find 2: Add New Entry 3: Speed Dial #s 4: Group 1: Unassigned 3: Friends 5: VIPs 7: Empty 2: Family 4: Colleague 6: Empty 5: My Name Card 6: Services 1: Account Info 3: Dir Assist 2: Customer Service SETTINGS 1: Display 1: Screen Saver 1: Main LCD 1: Preset Images 1: Image Gallery 01 4: Image Gallery 04 2: Image Gallery 02 5: Im
3: My Albums 1: In Phone 2: In Memory Card 2: Sub LCD 1: Preset Images 1: Analog 1 4: Digital 2 2: Analog 2 3: Digital 1 2: My Content 3: Main LCD Pic 2: Set Foreground 1: Digital Clock 2: Calendar 3: Others 2: Snow 5: Clovers 3: Hearts 3: Set Floating 1: None 4: Leaves 4: Incoming Call 1: With Caller ID 1: Preset Animation 2: My Content 3: My Albums 1: In Phone 2: In Memory Card 2: No Caller ID 1: Preset Animation 2: My Content 3: My Albums 1: In Phone 2: In Memory Card 5: Dialing Font 1: C
7: Backlight 1: Main Display 1: Flip Open 4: 8 seconds 2: 30 seconds 3: 15 seconds 2: 30 seconds 5: Off 3: 15 seconds 2: Keypad 1: Flip Open 4: 8 seconds 3: Pwr Save Mode (On/Off) 4: Brightness (level 5–1) 8: Service Light (On/Off) 9: Text Entry 1: Display Candidate (Display On/Display Off) 2: Prediction Start (3, 4, or 5 letters) 2: Sounds 1: Volume 1: Ringer 1: Ringer Off (Always Vibrate) 2: 1-Beep 3: Level 1 - 8 2: Separate Volume 3: Always Vibrate 2: Separate Volume 3: Always Vibrate 2: S
2: Ringer Type 1: Voice Calls 1: With Caller ID 1: Single Tones 4: My Content 2: Ring Tones 5: My Videos 3: Melodies 2: Ring Tones 5: My Videos 3: Melodies 2: No Caller ID 1: Single Tones 4: My Content 2: Messages 1: Voicemail 2: Text Message 3: Picture Mail 2: Ring Tones 3: Melodies 3: Schedule 1: Single Tones 4: My Content 4: Roam Ringer (Normal/Distinctive) 3: Alerts 1: Minute Beep (On/Off) 4: Sig.
1: Reject More 2: Recommended 3: Reject Less 3: Digit Dialing 1: Adapt Digits 2: Reset Digits 4: Sound 1: Prompts (On/Off) 2: Digits (On/Off) 3: Names (On/Off) 4: Name Settings 1: Speed 1: Faster 2: Recommended 3: Slower 2: Recommended 3: Softer 2: Volume 1: Louder 5: VoiceMode 1: Adapt VoiceMode 2: Reset VoiceMode 3: Tutorial 6: Voice Launch 1: Talk Key 2: Talk Key and Flip Open 7: About 5: Security 1: Lock Phone 1: Unlocked 2: On Power-up 3: Lock Now 2: Lock Pic/Video (On/Off) 3: Lock
8: Erase Pic/Video (Yes/No) 9: Reset Phone (Yes/No) 6: Roaming 1: Set Mode 1: Automatic 2: Roaming only 3: Sprint 2: Voice Memo 5: Voice Service 8: Display 11: Mediaplayer 14: VoiceSMS Inbox 17: Missed Events 3: Scheduler 6: Ringer Type 9: Alarms 12: Web 15: Send Text 2: Voice Memo 5: Voice Service 8: Display 11: Mediaplayer 14: VoiceSMS Inbox 17: Missed Events 3: Scheduler 6: Ringer Type 9: Alarms 12: Web 15: Send Text 2: Voice Memo 5: Voice Service 8: Display 11: Mediaplayer 14: VoiceSMS Inbox 17:
1: Call Setup 1: Abbrev.
4: Device Info IN USE MENU Press Options (Right Softkey) to display the following options: 1: Key Mute/Unmute 4: 3-Way Call 7: Tools xviii 2: Contacts 5: Call History 8: Phone Info 3: Messaging 6: Voice Memo
Section 1 Getting Started
2
Setting Up Service Section 1A Setting Up Service In This Section ⽧ Getting Started With Sprint PCS Service ⽧ Setting Up Your Voicemail ⽧ Sprint PCS Account Passwords ⽧ Getting Help Setting up service on your new Sprint PCS Phone is quick and easy. This section walks you through the necessary steps to unlock your phone, set up your voicemail, establish passwords, and contact Sprint for assistance with your Sprint PCS Service.
Getting Started With Sprint PCS Service Determining if Your Phone is Already Activated If you purchased your phone at a Sprint Store, it is probably activated, unlocked, and ready to use. If you received your phone in the mail, it probably has been activated; all you need to do is unlock it. If your phone is not activated, please refer to the activation card included with your phone. Unlocking Your Phone To unlock your phone, follow these easy steps: 1. Press to turn the phone on. 2.
Setting Up Service Setting Up Your Voicemail All unanswered calls to your Sprint PCS Phone are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your voicemail and personal greeting as soon as your Sprint PCS Phone is activated. To set up your voicemail: 1. From standby mode, press and hold . 2.
Sprint PCS Account Passwords As a Sprint PCS customer, you enjoy unlimited access to your personal account information, your voicemail account, and your Sprint PCS Vision or Sprint Power Vision account. To ensure that no one else has access to your information, you will need to create passwords to protect your privacy. Account Password If you are the account owner, you'll have an account password to sign on to www.sprint.com and to use when calling Sprint Customer Service.
Setting Up Service Getting Help Visit www.sprint.
Receiving Automated Invoicing Information For your convenience, your phone gives you access to invoicing information on your Sprint PCS Account. This information includes balance due, payment received, invoicing cycle, and an estimate of the number of minutes used since your last invoicing cycle. To access automated invoicing information: 䊳 Note: Press . This service may not be available in all Affiliate areas.
Setting Up Service Sprint Operator Services Sprint PCS Operator Services provides assistance when placing collect calls or when placing calls billed to a local telephone calling card or third party. To access Sprint Operator Services: 䊳 Press . For more information or to see the latest in products and services, visit us online at www.sprint.com. Note: Sprint Operator Services may not be available in all Affiliate areas.
10
Section 2 Your Sprint PCS Phone
12
Section 2A Your Sprint PCS Phone: The Basics Phone Basics In This Section ⽧ Front View of Your Phone ⽧ Viewing the Display Screen ⽧ Features of Your Sprint PCS Phone ⽧ Turning Your Phone On and Off ⽧ Using Your Phone’s Battery and Charger ⽧ Navigating Through Phone Menus ⽧ Displaying Your Phone Number ⽧ Making and Answering Calls ⽧ Entering Text Your Sprint PCS Phone is packed with features that simplify your life and expand your ability to stay connected to the people and information th
Front View of Your Phone 1. Speaker 2. Display Screen 23. Camera Key 3. Navigation Key 22. Right Softkey 4. Left Softkey 21. Camera Options Key 5. OK/Menu Key 6. Headset Jack 7. TALK Key 8. Voicemail Key 9. Numeric Keypad 20. END Key 19. Volume Key 18. BACK Key 17. Voice Command/ Speakerphone Key 10. TransFLASH™ Memory Slot 11. Shift/Asterisk Key 16. Space/Pound Key 15. Plus Code Dialing Key 14. Microphone 12. Power Interface 13.
Key Functions 1. Speaker allows you to hear the other caller and the different ring tones or sounds offered by your phone. 2. Display Screen displays all the information needed to Phone Basics operate your phone, such as the call status, the contacts, the date and time, the signal and battery strength, etc. 3. Navigation Key scrolls through the phone’s menu options and acts as a shortcut key from standby mode. Keys can also be reassigned to create customized shortcuts.
10. TransFLASH Memory Slot allows you to insert a specialized memory card made especially for mobile phones. Your phone supports up to 512 MB of TransFLASH memory. 11. Shift/Asterisk Key Enters the asterisk [*] character for calling features. In text entry mode, press to change the capitalization mode. 12. Power Interface Connector connects the phone to the battery charger. 13. Accessory Interface Connector allows you to connect optional accessories, such as a USB cable. 14.
19. Volume Key allows you to adjust the ringer volume in Phone Basics standby mode (with the flip open) or adjust the voice volume during a call. The volume key can also be used to scroll up or down to navigate through the different menu options. To mute the ringer during an incoming call, press the volume key up or down. 20. End Key (Power) ends a call. Press and hold this key for two seconds to turn your phone on or off.
Viewing the Display Screen Your phone’s display screen provides a wealth of information about your phone’s status and options. This list identifies the symbols you’ll see on your phone’s display screen: Tip: To view a list of your phone’s icons and descriptions, from the main menu select Settings > Phone Info > Icon Glossary. displays your current signal strength. The more lines you have, the stronger your signal. means your phone cannot find a signal. tells you a call is in progress.
indicates that Bluetooth technology is connected. indicates that Bluetooth technology is enabled. Phone Basics indicates that there is an unread message in your inbox. indicates that the text message has been read. indicates that there is an unread urgent message in your inbox. indicates that you have read the urgent message. indicates that there is an unplayed VoiceSMS message in your inbox. indicates that the VoiceSMS message has been played. indicates that the message was sent.
indicates that your phone is in ringer+vibrate mode. indicates that the ringer is set at a level between 1-8 or that 1-Beep is selected. indicates that the ringer is turned off. indicates that your phone’s ringer+vibrate is turned off. shows your current battery charge strength. (Icon shown fully charged and completely empty.) indicates that position location is active. indicates that position location is inactive. indicates that the TTY option is on. indicates that your phone is roaming.
indicates that the white balance has been set to Cloudy. This is used for taking pictures or movies outdoors under cloudy conditions. Phone Basics indicates that the white balance has been set to Tungsten. This is used for taking pictures or movies indoors under normal lighting conditions. indicates that the white balance has been set to Fluorescent. This is used for taking pictures or movies indoors under fluorescent lighting conditions. indicates that the white balance has been set to Manual.
Note: Display indicators help you manage your roaming charges by letting you know when you’re off the Nationwide Sprint PCS Network and whether you’re operating in digital mode. (For more information, see Section 2D: Controlling Your Roaming Experience on page 77.) Features of Your Sprint PCS Phone Congratulations on the purchase of your Sprint Power Vision Multimedia Phone. The MM-A940 by Samsung is lightweight, easy-to-use, and reliable, and it also offers many significant features and service options.
䢇 䢇 䢇 䢇 Section 2A: Your Sprint PCS Phone: The Basics Phone Basics 䢇 The built-in Scheduler offers several personal information management features to help you manage your busy lifestyle (page 99). Your Sprint PCS Phone is equipped with a Location feature for use in connection with location-based services that may be available in the future (page 56). Your phone’s external LCD display allows you to monitor the phone’s status and to see who’s calling without opening the phone.
Turning Your Phone On and Off Turning Your Phone On To turn your phone on: 䊳 Press and release . Once your phone is on, it may display “Searching for Service,” which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode – the phone’s idle state. At this point, you are ready to begin making and receiving calls. If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated.
Using Your Phone’s Battery and Charger Warning! Phone Basics Use only Sprint approved or manufacturer approved batteries and chargers with your Sprint PCS Phone. The failure to use a Sprint approved or manufacturer approved battery and charger may increase the risk that your Sprint PCS Phone will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage.
Installing the Battery To install the Li-Ion battery: 䊳 To install, insert the battery into the opening on the back of the phone and gently press down until the latch snaps into place. Removing the Battery To remove your battery: 1. Make sure the power is off so that you don’t lose any stored numbers or messages. 2. Press the battery release latch up and remove the battery from the phone at a 45-degree angle.
Charging the Battery Your Sprint PCS Phone’s Li-Ion battery is rechargeable and should be charged as soon as possible so you can begin using your phone. Phone Basics Keeping track of your battery’s charge is important. If your battery level becomes too low, your phone automatically turns off and you will lose all the information you were just working on. For a quick check of your phone’s battery level, glance at the battery charge indicator located in the upperright corner of your phone’s display screen.
Navigating Through Phone Menus The navigation key on your Sprint PCS Phone allows you to scroll through menus quickly and easily. The scroll bar at the right of the menu keeps track of your position in the menu at all times. To navigate through a menu, simply press the navigation key up or down. If you are in a first-level menu, such as Settings, you may also navigate to the next or previous first-level menu by pressing the navigation key right or left.
Backing Up Within a Menu To go to the previous menu: 䊳 Press . To return to standby mode: Press Phone Basics 䊳 . Displaying Your Phone Number Just in case you forget your phone number, your Sprint PCS Phone can remind you. To display your phone number: 䊳 Note: Select Menu > Settings > Phone Info > Phone Number. (Your phone number and other information about your phone and account will be displayed.) To select Menu, press the menu key.
Making and Answering Calls Making Calls Placing a call from your Sprint PCS Phone is as easy as making a call from any land line phone. Just enter the number and press , and you’re on your way to clear calls. To make a call using your keypad: 1. Make sure your phone is on. 2. Enter a phone number from standby mode. (If you make a mistake while dialing, press to erase one digit at a time. Press and hold to erase the entire number.) 3. Press .
Dialing Options When you enter numbers in standby mode, select Options ( ) to see the following dialing options. Section 2A: Your Sprint PCS Phone: The Basics Phone Basics To initiate an option, press the corresponding softkey button. 䢇 Send Msg allows you to send a text or VoiceSMS message with attachments to the number being dialed. 䢇 Dial dials the number or digits displayed. 䢇 Save: saves the phone number in your Contacts.
Answering Calls To answer an incoming call: 1. Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.) 2. Press to answer an incoming call. (Depending on your phone’s settings, you may also answer incoming calls by opening the phone or by pressing any number key. See “Call Answer Mode” on page 62 for more information.) Your Sprint PCS Phone notifies you of incoming calls in the following ways: 䢇 The phone rings and/or vibrates. 䢇 The indicator light flashes.
Answering a Roam Call With Call Guard Enabled Phone Basics Call Guard is an option that helps you manage your roaming charges when making or receiving calls while outside the Nationwide Sprint PCS Network. Please see Section 2D: Controlling Your Roaming Experience for more information about roaming. To answer a call when you are roaming and Call Guard is enabled: 䊳 Note: Select Answer to answer the call. (See “Using Call Guard” on page 81 for additional information.
Calling Emergency Numbers You can place calls to 911 (dial and press if your phone is locked or your account is restricted. Note: When you place an emergency call, your phone automatically enters Emergency mode. During an emergency call, press Options ( ) to display your options. To select an option, highlight it and press 䢇 䢇 Tip: ), even . Unlock Phone to unlock your phone (appears only if the phone is locked). To close the pop-up menu (appears only if the phone is unlocked), press the key.
In-Call Options Pressing Options ( ) during a call displays a list of features you may use during the course of a call. To select an option, press the corresponding keypad number or highlight the Phone Basics option and press . The following options are available through the Options menu: Warning! 䢇 䢇 䢇 䢇 䢇 䢇 䢇 䢇 Due to higher volume levels, do not place the phone near your ear during monitor use.
End-of-Call Options After receiving a call from or making a call to a phone number that is not in your Contacts, the phone number and the duration of the call are displayed. The left softkey displays the Save option. Select this option if you wish to add the new number to your Contacts. (See “Saving a Phone Number” below.) After receiving a call from or making a call to a phone number that is already in your Contacts, the entry name and phone number and the duration of the call are displayed.
Note: If Existing Entry was selected, press OK to launch the Find screen. Locate the desired contact and add the additional number to the selected entry. Skip steps 4 and 5 below. 3. Use your navigation key to select a label (Mobile, Home, . Phone Basics Work, Pager, or Others) and press 4. Enter a name for the entry using the numeric keys. Press to select the desired entry method T9(English), Alpha, Number, or Symbols. (See “Entering Text” on page 41.) 5.
Dialing and Saving Phone Numbers With Pauses You can dial or save phone numbers with pauses for use with automated systems, such as voicemail or credit card billing numbers. There are two types of pauses available on your phone: 䢇 Hard Pause sends the next set of numbers when you press the left softkey button. 䢇 2-Second Pause automatically sends the next set of numbers after two seconds. Note: You can have multiple pauses in a phone number and combine 2-second and hard pauses.
Plus (+) Code Dialing Phone Basics When placing international calls, you can use Plus Code Dialing to automatically enter the international access code for your location (for example, 011 for international calls placed from the United States). To make a call using Plus Code Dialing: 1. Press and hold until a “+” appears on your phone display. 2. Dial the country code and phone number you’re calling and press .
Using Speed Dialing You can store up to ninety-eight numbers in your phone’s speed dial memory to make contacting friends and family as easy as pressing a button or two. With this feature, you can dial Speed Dial entries using one key press for locations 2-9 or two key presses for locations 10-99. To use One-Touch Dialing for Speed Dial locations 2-9: 䊳 Press and hold the appropriate key for approximately two seconds.
Entering Text Selecting a Character Input Mode Phone Basics Your Sprint PCS Phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when using Sprint PCS Mail and SMS Text Messaging). To change the character input mode: 1. When you display a screen where you can enter text, press the right softkey to change the character input mode. 2.
Tip: When entering text, press the * (Shift) key to change letter capitalization (ABC > Abc > abc). Entering Characters Using T9 Text Input T9 Text Input lets you enter text in your Sprint PCS Phone by pressing keys just once per letter. (To select the T9 Word mode when entering text, see “Selecting a Character Input Mode” on page 41.) T9 Text Input analyzes the letters you enter using an intuitive word database and creates a suitable word. (The word may change as you type.
Entering Characters by Tapping the Keypad To enter characters by tapping the keypad: 1. Select the Abc mode. (See “Selecting a Character Input Mode” on page 41.) Phone Basics 2. Press the corresponding keys repeatedly until the desired letter appears (for example, to enter the word “Bill,” press times, and mistake, press hold twice, three times, three three times again). (If you make a to erase a single character. Press and .
Entering Numbers, Symbols, Smileys and Preset Messages To enter numbers: 䊳 Select the Number mode and press the appropriate key. (See “Selecting a Character Input Mode” on page 41.) To enter symbols: 䊳 Select the Symbols mode. (See “Selecting a Character Input Mode” on page 41.) To enter a symbol, press the appropriate key indicated on the display. To enter “emoticons” (smileys): 䊳 Select the Emoticons mode and press the appropriate key. (See “Selecting a Character Input Mode” on page 41.
Sec tion 2B Controlling Your Phone’s Settings In This Section Sound Settings ⽧ Display Settings ⽧ Location Settings ⽧ Messaging Settings ⽧ Airplane Mode ⽧ TTY Use With Sprint PCS Service ⽧ Phone Setup Options ⽧ Call Setup Options Your Phone’s Settings ⽧ Using the menu options available on your Sprint PCS Phone, you can customize your phone to sound, look, and operate just the way you want it to. This section describes how you can change your phone’s settings to best suit your needs.
Sound Settings Ringer Types Ringer types help you identify incoming calls and messages. You can assign ringer types to individual Contacts entries, types of calls, and types of messages. 䢇 Preprogrammed Ringers include a variety of standard ringer types and familiar music. 䢇 Vibrating Ringer alerts you to calls or messages without disturbing others. 䢇 Downloaded Ringers can be downloaded right to your phone. (See “Downloading Premium Services Content” on page 211.
Selecting Ringer Types for Messages To select a ringer type for messages: 1. Select Menu > Settings > Sounds > Ringer Type > Messages. 2. Select Voicemail, Text Message, or Picture Mail. 3. Select Single Tones, Ring Tones, Melodies, or My Content . (The list of preprogrammed ringers Your Phone’s Settings and press displays.) 4. Use your navigation key to scroll through the available ringers. A sample ringer will sound as you highlight each option. 5. Press to assign the desired ringer.
Key Tone Level Your phone allows you to set the desired volume level of the key tones. To set the key tone level: 1. Select Menu > Settings > Sounds > Key Tone. 2. Select Key Tone Level and press . 3. Press the navigation key up or down until you hear the desired tone level and press . Key Tone Length The key tone length allows you to choose between short or long tones when pressing a key. Longer tone lengths may be better for tone recognition when dialing voicemail or other automated systems.
Adjusting the Phone’s Volume Settings You can adjust your phone’s volume settings to suit your needs and your environment. To adjust your phone’s volume settings: 1. Select Menu > Settings > Sounds > Volume. 2. Select Ringer, Text Message, Picture Mail, Voice Mail, Your Phone’s Settings Alarms, or App. Volume. 3. Using the navigation key, select Separate Volume. (Select Always Vibrate to make the ringer vibrate at any volume level.) Note: Separate Volume is not available for Ringer volume. 4.
Alert Notification Your Sprint PCS Phone can alert you with an audible tone when you change service areas, once a minute during a voice call, the signal fades, powering on/off your phone, or when a call has been connected. To enable or disable alert sounds: 1. Select Menu > Settings > Sounds > Alerts. 2. Select Minute Beep, Service, Connect, Sig. Fade Tone, or Power On/Off and press 3. Select On or Off and press . . Silence All There may be times when you need to silence your phone entirely.
Display Settings Changing the Text Greeting The text greeting can be up to fourteen characters and is displayed on your phone’s screen in standby mode. You may choose to keep the phone’s default greeting (“Sprint”), or you may enter your own custom greeting. Your Phone’s Settings To display or change your greeting: 1. Select Menu > Settings > Display > Greeting > Custom. 2. Enter a custom greeting using your keypad and press . (See “Entering Text” on page 41.
Changing the Display Screen Your new Sprint PCS Phone offers options for what you see on the display screen and when in standby mode. To change the display images on main LCD: 1. Select Menu > Settings > Display > Screen Saver. 2. Select Main LCD. 3. Select Preset Images, My Content, or My Albums and press . 4. Choose the desired image and press to assign. To change the display images on Sub LCD: 1. Select Menu > Settings > Display > Screen Saver. 2. Select Sub LCD. 3.
Changing the Phone’s Menu Style Your Sprint PCS Phone allows you to choose how the menu appears on your display screen. To select the display’s menu style: 1. Select Menu > Options > Menu Style. 2. Select 3x4 Style to view each main menu item as an main menu as a list and press Your Phone’s Settings animated, single screen icon or List Style to view the . Changing the Font Color You can customize your phone’s display font by selecting a color scheme or style to reflect your personality.
Changing the Foreground Choose whether you want your phone’s clock or calendar to display on screen in analog mode, digital mode, or with time and date. To change the appearance on the standby screen: 1. Select Menu > Settings > Display > Set Foreground. 2. Select Digital Clock, Calendar, or Others and press . 3. Press the navigation key left or right to display the available screen locations. 4. Press Assign ( ) to apply the foreground setting.
Display Candidate The Display Candidate allows you to turn on or off preditive text when T9 (English) is selected. When you are entering a word, you can have the most common match displayed automatically after 3, 4, or 5 letters. To turn on or off display candidate: 1. Select Menu > Settings > Display > Text Entry > Your Phone’s Settings Display Candidate. 2. Press the navigation key up or down to select Display On or Display Off and press . To change the prediction start letter: 1.
Location Settings Your Sprint PCS Phone is equipped with a Location feature for use in connection with location-based services that may be available in the future. The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except 911. Note: Turning Location on will allow the network to detect your position using GPS technology, making some Sprint PCS applications and services easier to use.
Messaging Settings Staying connected to your friends and family has never been easier. With your phone’s advanced messaging capabilities, you can send and receive many different kinds of text messages without placing a voice call. (For more information, see “Accessing Messaging” on page 207.
Deleting Old Messages You can delete messages that you’ve already read whenever you like, or you can have your phone delete them automatically for you when your phone's message memory becomes full. To automatically delete read messages: 1. Select Menu > Messaging > Settings > General > Auto-Erase. 2. Select Yes or No and press . Adding a Customized Signature Each message you send can have a customized signature to reflect your personality. To add a customized signature to each sent message: 1.
Managing Preset Messages Your phone is programmed with 10 preset messages to help make sending text messages faster and easier. These messages, such as “Where are you?,” “Let’s get lunch,” and “Meet me at,” can be customized or deleted to suit your needs. You can even add your own preset messages to the list (up to 20 messages total). Your Phone’s Settings To edit or delete a preset message: 1. Select Menu > Messaging > Settings > General > Preset Messages. (The list of preset messages displays.) 2.
Airplane Mode Airplane Mode allows you to use many of your phone’s features, such as Games, Music, Notepad, Voice Memos, etc., when you are in an airplane or in any other area where making or receiving calls or data is prohibited. When your phone is in Airplane Mode, it cannot send or receive any calls or access online information. To set your phone to Airplane Mode: 1. Select Menu > Settings > Others > Airplane Mode. 2. Read the disclaimer and press . 3. Select On, Off or On Power Up and press .
When establishing your Sprint PCS Service, please call Sprint Customer Service via the state Telecommunications Relay Service (TRS) by first dialing . Then provide the state TRS with this number: 866-727-4889. To turn TTY Mode on or off: 1. Press Menu > Settings > Others > TTY Mode from standby mode. (An informational message displays.) Your Phone’s Settings 2. Press . 3. Select TTY Full, TTY+Hear, TTY+Talk, or TTY Off and press Note: .
Phone Setup Options Favorites Your phone offers you the option of assigning favorite or often-used functions. Selecting Favorites ( ) in standby mode will launch your personal favorite list. To assign your shortcut key: 1. Select Favorites ( ). 2. Select the desired location and select Add or Replace ( ). 3. Press the navigation key up or down to highlight the desired function and press .
Auto Answer Mode You may set your phone to automatically pick up incoming calls when connected to an optional hands-free car kit. To set Auto Answer mode: 1. Select Menu > Settings > Others > Call Setup > Auto Answer. 䡲 . Your Phone’s Settings 2. To select an option, highlight it and press Car-Kit/Headset select Yes to answer calls automatically when the phone is connected to a hands-free car kit or a headset (sold separately).
Call Setup Options Call Setup options allow you to set up the following options: 䢇 Abbreviated Dialing allows you to program a five or six digit prefix for commonly used phone numbers. 䢇 Contacts Match allows you to turn on or off the contacts matching feature. 䢇 Restriction allows you to restrict outgoing calls. 䢇 Call Answer allows you to set up how you answer incoming calls. 䢇 Auto Answer allows you to answer incoming calls automatically with the optional hands-free car kit.
Making an Abbreviated Dial Call To make a call: 1. Enter the last four or five digits of the prefix phone number. 2. Abbrev. Dial is displayed in the lower left corner with the prefix digits displayed. If there is more than one Contact entry that matches the last four or five digits, a list is displayed which allows you to select the desired number to call. 3. Press Your Phone’s Settings Note: to make the call.
Restriction Allows you to restrict outgoing call options by selecting one of the following options: 䢇 Allow all to allow outgoing calls to be made (no restrictions). 䢇 Contacts Only to allow only outgoing calls to those saved in the contacts. 䢇 Special# Only to allow only outgoing calls to the numbers set up in the special numbers list. (See “Using Special Numbers” on page 72.) To access call restriction: 1. Select Menu > Settings > Others > Call Setup > Restriction. 2. Enter your lock code. 3.
S ec ti o n 2 C Setting Your Phone’s Security In This Section Accessing the Security Menu ⽧ Using Your Phone’s Lock Feature ⽧ Using Special Numbers ⽧ Erasing Contacts ⽧ Erasing My Content ⽧ Resetting Your Phone ⽧ Security Features for Sprint Vision Your Phone’s Security ⽧ By using the security settings on your Sprint PCS Phone, you receive peace of mind without sacrificing flexibility. This section will familiarize you with your phone’s security settings.
Accessing the Security Menu All of your phone’s security settings are available through the Security menu. You must enter your lock code to view the Security menu. To access the Security menu: 1. Select Menu > Settings > Security. 2. Enter your lock code to display the Security menu. Tip: If you can’t recall your lock code, try using the last four digits of either your Social Security number or Sprint PCS Phone number or try 0000 or NATL(6285).
Unlocking Your Phone To unlock your phone: 1. From standby mode, press , , , or . 2. Enter your lock code. Calling in Lock Mode You can place calls to 911 and to your special numbers when in lock mode. (For information on special numbers, see “Using Special Numbers” on page 72.) To place an outgoing call in lock mode: Your Phone’s Security 䊳 To call an emergency number, special number, or Sprint Customer Service, enter the phone number and press .
Changing the Lock Code To change your lock code: 1. Select Menu > Settings > Security. 2. Enter your lock code. (The Security menu is displayed.) 3. Select Change Lock. 4. Enter your new lock code and press 5. Re-enter your new lock code and press . . Lock Service This setting allows you to lock voice call functions and Sprint PCS Vision/Sprint Power Vision services.
Locking Sprint Power Vision 1. Select Menu > Settings > Security. 2. Enter your lock code. (The Security menu is displayed.) 3. Select Lock Services and press . 4. Select Power Vision and press . 5. Select Lock and press .
Using Special Numbers Special numbers are important numbers that you have designated as being “always available.” You can call and receive calls from special numbers even if your phone is locked. You can save up to ten special numbers in addition to your Contacts entries (the same number may be in both directories). To add or replace a special number: 1. Select Menu > Settings > Security. 2. Enter your lock code. (The Security menu is displayed.) 3. Select Special #. 4.
Erasing Contacts You can quickly and easily erase all of the contents of your Contacts list. To erase all the names and numbers in your Contacts: 1. Select Menu > Settings > Security. 2. Enter your lock code. (The Security menu is displayed.) 3. Select Erase Contacts and press . 4. If you are certain you would like to erase all of your .
Erasing Pic/Video You can use your phone’s security menu to erase all pictures and videos stored in your phone. Note: This process will erase all pictures/videos stored in the phone. None of the pictures or videos saved on the memory card will be erased. To erase all pictures and videos: 1. Select Menu > Settings > Security. 2. Enter your lock code. (The Security menu is displayed.) 3. Select Erase Pic/Video and press . 4.
SM Security Features for Sprint PCS Power Vision Enabling and Disabling Sprint PCS Vision Services You can disable Sprint PCS Vision services without turning off your phone; however, you will not have access to all Sprint PCS Vision services, including Web and messaging. Disabling Sprint PCS Vision will avoid any charges associated with Vision services. While signed out, you can still place or receive phone calls, check voicemail, and use other voice services.
76 Section 2C: Setting Your Phone’s Security
Sec tion 2D Controlling Your Roaming Experience In This Section ⽧ Understanding Roaming ⽧ Setting Your Phone’s Roam Mode ⽧ Controlling Roaming Charges Using Call Guard Roaming Roaming is the ability to make or receive calls when you’re off the Nationwide Sprint PCS Network. Your new digital dual band MM-A940 by Samsung® works anywhere on the Nationwide Sprint PCS Network and allows you to roam on other 1900 and 800 MHz digital networks where we’ve implemented roaming agreements with other carriers.
Understanding Roaming Recognizing the Roaming Icon on the Display Screen Your phone’s display screen always lets you know when you’re off the Nationwide Sprint PCS Network. Any time you are roaming, the phone displays the roaming icon ( ). Tip: Remember, when you are using your phone off the Nationwide Sprint PCS Network, always dial numbers using 11 digits (1 + area code + number). Note: Unless your Sprint PCS Service Plan includes roaming, you will pay a higher per-minute rate for roaming calls.
Checking for Voicemail Messages While Roaming When you are roaming off the Nationwide Sprint PCS Network, you will not receive on-phone notification of new voicemail messages. Callers can still leave messages, but you will need to periodically check your voicemail for new messages if you are in a roaming service area for an extended period of time. To check your voicemail while roaming: 1. Dial 1+area code+your Sprint PCS Phone number. 2. When you hear your voicemail greeting, press . 3.
Setting Your Phone’s Roam Mode Your Sprint PCS Phone allows you to control your roaming capabilities. By using the Roaming menu option, you can determine which signals your phone accepts. Set Mode Choose from three different settings on your digital dualband phone to control your roaming experience. To set your phone’s roam mode: 1. Select Menu > Settings > Roaming > Set Mode. 2. To select an option, highlight it and press 䡲 䡲 䡲 80 Automatic seeks Sprint PCS Service.
Using Call Guard Your phone has two ways of alerting you when you are roaming off the Nationwide Sprint PCS Network: the onscreen roaming icon and Call Guard. Call Guard makes it easy to manage your roaming charges by requiring an extra step before you can place or answer a roaming call. (This additional step is not required when you make or receive calls while on the Nationwide Sprint PCS Network.) To turn Call Guard on or off: 1. Select Menu > Settings > Roaming > Call Guard. 2.
82 Section 2D: Controlling Your Roaming Experience
Sec tion 2E Managing Call History In This Section ⽧ Viewing History ⽧ Call History Options ⽧ Making a Call From Call History ⽧ Saving a Phone Number From Call History ⽧ Prepending a Phone Number From Call History ⽧ Erasing Call History Section 2E: Managing Call History Call History The Call History keeps track of incoming calls, calls made from your Sprint PCS Phone, and missed calls. This section guides you through accessing and making the most of your Call History.
Viewing History You’ll find the Call History feature very helpful. It is a list of the last 20 phone numbers (or Contacts entries) for calls you placed, accepted, or missed. Call History makes redialing a number fast and easy. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list. Each entry contains the phone number (if it is available) and Contacts entry name (if the phone number is in your Contacts).
䢇 䢇 䢇 Save to save the number if it is not already in your Contacts. (See “Saving a Phone Number From Call History” on page 86.) Prepend to add numbers to the beginning of the selected number. (See “Prepending a Phone Number From Call History” on page 87.) Erase to delete the entry. Tip: You can also view the next Call History entry by pressing the navigation key right or view the previous entry by pressing the navigation key left. Making a Call From Call History To place a call from Call History: 1.
Saving a Phone Number From Call History Contacts entries can store up to a total of 5 phone numbers, and each entry’s name can contain twenty characters. To save a phone number from Call History: 1. Use your navigation key to select a Call History entry and press Options ( ). 2. Select Save and press . 3. Select New Entry or Existing Entry and press Note: . If Existing Entry was selected, find the desired contact entry and press OK. Select the desired label and select Done. 4.
Prepending a Phone Number From Call History If you need to make a call from Call History and you happen to be outside your local area code, you can add the appropriate prefix by prepending the number. To prepend a phone number from Call History: 1. Select a Call History entry, select the number or the name and press 2. Press Options ( . ) and select Prepend. 3. Enter the prefix and press . Erasing Call History To erase individual Call History entries, see “Call History Options” on page 84.
88
Sec tion 2F Using Contacts In This Section ⽧ Adding a New Contacts Entry ⽧ Finding Contacts Entries ⽧ Contacts Entry Options ⽧ Adding a Phone Number to a Contacts Entry ⽧ Editing a Contacts Entry’s Phone Number ⽧ Assigning Speed Dial Numbers ⽧ Editing a Contacts Entry ⽧ Selecting a Ringer Type for an Entry ⽧ Dialing Sprint PCS Services Section 2F: Using Contacts Contacts Now that you know the basics that make it easier to stay in touch with people and information, you’re ready to explor
Adding a New Contacts Entry Your phone's contacts list can store up to 500 entries. Contacts entries can store up to a total of five phone numbers, and each entry’s name can contain twenty characters. To add a new entry: 1. Select Menu > Contacts > Add New Entry. Shortcut: Enter the phone number in standby mode and press OK. Proceed with steps 2-5. 2. Enter a name for the new entry and press the navigation key down. (See “Entering Text” on page 41.) 3. Enter the phone number for the entry and press .
Finding Contacts Entries There are several ways to display your Contacts entries: by name, by speed dial number, by group, and by voice dial tags. Follow the steps outlined in the sections below to display entries from the Contacts menu. Finding Names To find Contacts entries by name: 1. Select Menu > Contacts > Find. 2. Scroll through all the entries using your navigation key. – or – 3. Enter the first letter of a name or part of a name (such as “ave” for “Dave”).
Finding Speed Dial Numbers To find phone numbers you have stored in speed dial locations: 1. Select Menu > Contacts > Speed Dial #s. 2. Scroll through speed dial entries using your navigation key. Speed dial numbers are displayed in numeric order. – or – Enter the number of a speed dial location using your keypad. 3. To display an entry, highlight it and press . 4. To dial the entry’s default phone number, press . Finding Group Entries To find entries designated as part of a group: 1.
Contacts Entry Options To access a Contacts entry’s options, display the entry and press Edit ( 䢇 䢇 䢇 䢇 䢇 䢇 䢇 䢇 Tip: ). To select a field, highlight it and press . [Add Photo] to add a photo to the entry. [Add number] to add a phone number to the entry. (See “Adding a Phone Number to a Contacts Entry” on page 94.) [Email] to add an email address to the entry. [URL] to add a web site’s URL. to the entry. [Nickname] to add a nickname to the entry.
Adding a Phone Number to a Contacts Entry To add a phone number to an entry: 1. Display a Contacts entry (see “Finding Contacts Entries” on page 91) and press 2. Press Edit ( . ). 3. Highlight [Add Number], enter the new phone number, and press . 4. Select a label for the number and press 5. Press Done ( . ) to save the new number. Editing a Contacts Entry’s Phone Number To edit an entry’s phone number: 1. Display a Contacts entry (see page 91) and press 2. Press Edit ( ). 3.
7. Press Done ( ) to save the number. Assigning Speed Dial Numbers Your phone can store up to 98 phone numbers in speed dial locations. For details on how to make calls using speed dial numbers, see “Using Speed Dialing” on page 40. Speed dial numbers can be assigned when you add a new Contacts entry, when you add a new phone number to an existing entry, or when you edit an existing number. To assign a Speed Dial number to a new or existing phone number: 1.
Editing a Contacts Entry To make changes to an entry: 1. Display a Contacts entry. 2. Press Edit ( ). 3. Highlight the part of the entry you wish to edit (Name, Group, Ringer, etc.) and press . 4. Add and/or edit the desired information and press 5. Press Done ( . ) to save your changes. Selecting a Ringer Type for an Entry You can assign a ringer type to a Contacts entry so you can identify the caller by the ringer type. (See “Ringer Types” on page 46.) To select a ringer type for an entry: 1.
7. Press Done ( ) to save the new ringer type. Dialing Sprint PCS Services Your Contacts list is preprogrammed with contact numbers for various Sprint PCS Services. To dial a service from your Contacts: 1. Select Menu > Contacts > Services. 2. Select Account Info, Customer Service, or Dir Assist. 3. Press to place the call. To dial a service from standby mode using your keypad: 1. Dial the appropriate service number: 䡲 Customer Service – 䡲 Directory Assistance – 䡲 Account Info.
98 Section 2F: Using Contacts
Scheduler & Tools Sec tion 2G Using the Phone’s Scheduler and Tools In This Section ⽧ Using Your Phone’s Scheduler ⽧ Using Your Phone’s Alarm Clock ⽧ Using Your Phone’s Memo Pad ⽧ Using Your Phone’s Tools Your Sprint PCS Phone is equipped with several personal information management features that help you manage your busy lifestyle.
Using Your Phone’s Scheduler Adding an Event to the Scheduler Your Scheduler helps organize your time and reminds you of important events. To add an event: 1. Select Menu > Tools > Planner > Scheduler. 2. Using your navigation key, highlight the day to which you would like to add an event and press Tip: . Press the navigation key up or down to scroll by week through the Scheduler. 3. Select Add New ( ). 4. Enter a title for the event and press Next ( ). (See “Entering Text” on page 41.) 5.
Scheduler & Tools 8. Select a ringer type for the alarm by highlighting the ringer field and pressing 䡲 Select the desired ringer category and press . Press the navigation key up or down to select the desired ringer and press . 9. Select a time for the event by highlighting the Start time. 䡲 Using your keypad enter the start time and date for the event. 10. Select an end time and date for the event by highlighting the End time. 䡲 Using your keypad enter the end time and date for the event. 11.
Event Alert Menu When your phone is turned on and you have an event alarm scheduled, your phone alerts you and displays the event summary. To silence the alarm and reset the schedule, press . Viewing Events To view your scheduled events: 1. Select Menu > Tools > Planner > Scheduler. 2. Using your navigation key, highlight the day for which you would like to view events and press . (If you have events scheduled for the selected day, they will be listed in chronological order.
Scheduler & Tools Erasing a Day’s Events To erase a day’s scheduled events: 1. Select Menu > Tools > Planner > Scheduler. 2. Using your navigation key, highlight the day for which you would like to erase events and press Tip: . In the Scheduler view, days with events scheduled are underlined. 3. Press Options ( ) and select Erase All. (An alert will appear notifying you of the number of events to be erased.) 4. Select Yes to confirm or No to Cancel.
5. Select a ringer type for the alarm by highlighting the ringer field and pressing 䡲 . Select the desired ringer category and press . Press the navigation key up or down to select the desired ringer and press . 6. Select a repeating status for the alarm by highlighting the Repeat field. 䡲 Press the navigation key left or right to select Once, Mon to Fri, Sat & Sun, or Daily . 7. Select a snooze interval for the alarm by highlighting the Snooze field.
Scheduler & Tools Using Your Phone’s Memo Pad Your Sprint PCS Phone comes with a memo pad you can use to compose and store reminders and notes to help keep you organized. To compose a note: 1. Select Menu > Tools > Memo Pad . Note: If there are no memos saved yet, the New Memo screen is automatically displayed. 2. Select Add New. ( ) 3. Type your note using the numeric keypad and press . (See “Entering Text” on page 41.) To read a saved note: 1. Select Menu > Tools > Memo Pad. 2.
Using Your Phone’s Tools In addition to helping your be more efficient and organized, your Sprint PCS Phone offers useful and entertaining tools. File Manager The File Manager allows you to manage multiple files and applications for your phone. Files are sorted by type in five different menus. Memory Info is also available in the File Manager to view available memory statistics. To Launch the File Manager: 1. Select Menu > Tools > File Manager. 2.
Scheduler & Tools Using Motion Fun Motion Fun consists of three built-in random generated functions. They are Dice Game, Random Ball, and Beat Box. Each application delivers a fun filled response based on shaking or hitting the phone. Experiment with each of the applications to get unique and different results. To launch the Motion Fun applications: 1. Select Menu > Tools > Motion Fun. 2. Select Dice Game, Random Ball, or Beat Box and press . 3.
Task List This option allows you to manage daily tasks that include dates, times, and priority levels. 1. Select Menu > Tools > Planner > Task List. Note: If there are no tasks saved, the New Task screen is automatically displayed. 2. Select Add New ( ). 3. Enter the task name using the keypad and press . 4. Select a Priority level by highlighting Priority field. 䡲 Press the navigation key left or right to select Low or High. 5. Select a due time by highlighting the Due Time field.
Scheduler & Tools Countdown This option allows you to enter a timer that counts down to an event based on a date and time specified. 1. Select Menu > Tools > Planner > Countdown. Note: If there are no countdowns saved, the New Countdown screen is automatically displayed. 2. Select Add New ( ). 3. Enter the countdown name using the keypad and press . 4. Select a time by highlighting the Time field. 䡲 Using the keypad, enter the time of the countdown. 5. Select a date by highlighting the Date field.
110 Section 2G: Using the Phone’s Scheduler and Tools
Sec tion 2H Voice Services Using Your Phone’s Voice Services In This Section ⽧ Using Voice-Activated Dialing ⽧ Using Call ⽧ Using Send Text ⽧ Using Lookup ⽧ Using Go To ⽧ Using Check - ⽧ Voicemode ⽧ Managing Voice Memos Your Sprint PCS Phone’s Voice Services let you place calls using your voice, store voice reminders, and record memos right on your phone.
Using Voice-Activated Dialing SM In addition to Sprint PCS Voice Command (see page 235), voice recognition allows you to say commands to perform common functions supported by your phone. There is no voice training required to use the voice recognition feature. You simply say the pre-designated command displayed on your screen in a normal tone of voice to perform the desired function. To activate voice recognition: 1. Press and hold . (The phone prompts you to say a command.) 2.
Voice Launch Voice Launch allows you to configure how to launch Voice-Activated dialing. To access voice launch: Voice Services 1. Press Menu > Settings > Voice Service. 2. Select Voice Launch and press . 3. Select Talk Key or Talk Key and Flip Open and press .
If a name has only a single number, or if you know the name but are not sure which number to call, say “Call” followed by the name only. For example, say “Call John.” If the name is recognized and there is only one number for the name, VoiceSignal immediately places the call. If there are multiple numbers stored for the contact, the phone prompts you with “Which Number?” and displays a list of options. You can select an option by saying it or by using your keypad.
Adapting Digit Dial After you adapt Digit Dial, your phone will be customized to your voice. Other people will not be able to use Digit Dial on your phone unless they reset the phone to factory defaults. Note: ONLY adapt Digit Dial if the system is frequently misrecognizing your speech. You can always restore the system to its original factory setting. Adaptation involves recording several digit sequences to teach the system your voice. The adaptation process takes about three minutes.
To adapt Digit Dial to your voice: 1. Menu > Settings > Voice Service. 2. Select Digit Dialing and press . 3. Select Adapt Digits and press to begin. (The phone displays the first digit sequence.) 4. Wait for the beep, and then repeat the digits using a normal tone of voice. (The phone plays back your recording and asks you if the recording sounds “OK.”) 5. If the recording sounds OK (no mistakes and no background noises), say Yes. 6. If you need to re-record the digits to fix any problems, say No.
Note: It is recommended that you perform the complete adaptation of Digit Dial at least once to achieve the maximum benefit of this feature. If a partial adaptation is performed, you can always return later and resume the process from the half-way point. Voice Services Resetting Digit Dial Adaptation 1. Menu > Settings > Voice Service. 2. Select Digit Dialing and press 3. Select Reset Digits and press . . 4. Press the navigation key up or down to select Yes and press .
Using Choice Lists If VoiceSignal is not confident it has recognized a name or number correctly, it might display a choice list and prompt you with “Call?” followed by the first choice on the list. To confirm the choice, say “Yes” or to hear the next choice, say “No.” You can also select the correct choice using your keypad. To cancel the command, say “Cancel,” or to say the name or number again, say “Repeat.
Using Send Text To launch a text message: 1. Press and hold . 2. Say “Send Text” followed immediately by the name of a person in your contact list and, optionally, the type of the number you want to send it to. For example, say “Send Text John Smith.” If you do not specify the number type and there are multiple numbers for the name, VoiceSignal chooses the mobile number by default. If you say the “Send” command without specifying a recipient, VoiceSignal prompts you with “Say the name.
Using Lookup You can look up and display contact information for any person stored in your contact list by saying “Lookup,” followed by the name. To use Lookup : 1. Press and hold . 2. Say “Lookup John Smith.” The entry information for the specified contact is displayed. If you say only “Lookup,” VoiceSignal prompts you with “Say the name.
Using Check - Voice Services You can have the phone play back and display information about its current state, including its phone number, current signal strength, network coverage, and battery level. To see and hear status information: 1. Press and hold . 2. Say “Check” followed immediately by one of the following items: 䡲 Status: plays back and displays ALL status information. 䡲 Signal: plays back and displays current signal strength. 䡲 Network: plays back and displays current network coverage.
For example, say “Check Status.” The phone responds by playing back and displaying the message “Battery…Low.” You can also say “Check” by itself. The phone prompts you to say one of the valid status items. 122 Coverage No Coverage - When handset is scanning. Sprint Coverage - Handset in on a non-roam system. Digital Roam - Handset is on a digital roam system. Signal Strength High - Number of bars displayed is 5-6 or more. Good - Number of bars displayed is 3/4. Low - Number of bars displayed is 0/2.
VoiceMode Adapting VoiceMode Before you can start using VoiceMode for text messaging, you need to adapt VoiceMode to understand your speech patterns. To accomplish this, you must read a series of words on screen and then repeat the words into your phone. The initial process takes about 3 minutes to complete. To adapt VoiceMode: 1. Menu > Settings > Voice Service > VoiceMode. 2. Select Adapt VoiceMode and press 3. Read the instruction screen and press . to begin. 4.
Managing Voice Memos You can use your phone’s Voice Services to record brief memos to remind you of important events, phone numbers, or grocery list items. Recording Voice Memos To record a voice memo: 1. Select Menu > Tools > Voice Memo > Record. 2. Begin recording after the prompt. To end the recording of your memo: 䊳 Press or . To record a conversation during a phone call: 1. During a call, select Options > Voice Memo.
Voice Memo Options To play the voice memos you have recorded: 1. Select Menu > Tools > Voice Memo. . (The phone displays a list of saved memos, with the first one selected.) 3. Highlight the desired memo and press . — or — Press the number corresponding to the memo you want to review. Erasing Voice Memos To erase an individual memo: 1. Select Menu > Tools > Voice Memo. 2. Select Review and press . 3. Highlight the desired memo. 4. Select Options ( ) and press Erase. 5. Select Yes and press .
126 Section 2H: Using Your Phone’s Voice Services
Sec t ion 2I Using the TransFLASH Card In This Section TransFLASH Card ⽧ Using Your Phone’s TransFLASH Card and Adapter Your Sprint PCS Phone allows you to use a TransFLASH card and an adapter to expand the phone’s available memory space. This highly secure digital card enables images, music, and voice data to quickly and easily be exchanged among SD-compatible devices. This section details the features and options of your phone’s memory card functionality.
Using Your Phone’s TransFLASH Card and Adapter Using the TransFLASH Memory Card Your Sprint PCS Phone is equipped with a 32 MB TransFLASH (Secure Digital) memory card and its adapter to expand the phone’s available memory space. It allows you to easily store images, videos, music files, and voice data in your phone. Inserting the TransFLASH Memory Card To insert the TransFLASH memory card into your phone: 1. Open the TransFlash access panel located on the bottom left side of the phone. 2.
TransFLASH memory Icon Indicators The following icons will appear on your phone’s display screen when a TransFLASH memory card is properly inserted into the TransFLASH memory card slot: Indicates that a TransFLASH memory card has been inserted into your handset. DO NOT remove a TransFLASH memory card while files are being accessed or transferred. It will result in loss or damage of data. TransFLASH Card Note: Make sure your battery is fully charged before using the TransFLASH memory card.
Using the TransFLASH SD Adapter The supplied TransFLASH SD (memory) adapter allows TransFLASH memory cards to be used in SD compatible devices. Before using, you will need to insert the TransFLASH memory card into the TransFLASH SD adapter. To insert the TransFLASH memory card into the TransFLASH SD adapter: 䊳 With the label side of the TransFLASH memory card facing up, insert the card into the supplied TransFLASH SD adapter and gently slide the card until it is fully inserted.
Sec tion 2J Using the Built-in Camera In This Section Taking Pictures ⽧ Storing Pictures ⽧ Recording Videos ⽧ Storing Videos ⽧ Sending Sprint PCS Picture Mail ⽧ Managing Sprint PCS Picture Mail Camera ⽧ SM Your Sprint PCS Phone’s built-in camera gives you the ability to take full-color digital pictures, view your pictures using the phone’s display, and instantly send them to family and friends.
Taking Pictures Taking pictures with your phone’s built-in camera is as simple as choosing a subject, pointing the lens, and pressing a button. You can activate the phone’s camera mode whether the phone is open or closed. To take a picture with the phone open: 1. Twist and turn your screen to a 90 degree angle to activate the camera mode. (Camera options are available through the camera mode Options menu. See “Camera Mode Options” on page 134 for more information.) 2.
䡲 䡲 䡲 䡲 䡲 䡲 Creating Your Sprint PCS Picture Mail Password The first time you use any of the picture management options involving the Sprint PCS Picture Mail Web site, you will need to establish a Sprint PCS Picture Mail password through your phone. This password will also allow you to sign in to the Sprint PCS Picture Mail Web site at www.sprint.com/ picturemail to access and manage your uploaded pictures and albums. To create your Sprint PCS Picture Mail password: 1.
2. Enter a four- to eight-digit password and press . (You will be prompted to confirm your password.) 3. Please wait while the system creates your account. Tip: Write down your Sprint PCS Picture Mail password in a secure place. Once you have received confirmation that your account has been successfully registered, you may upload and share pictures and access the Sprint PCS Picture Mail Web site.
䢇 䢇 䢇 Section 2J: Using the Built-in Camera 135 Camera 䢇 Fun Tools to select from the following options: 䡲 Fun Frames to select your favorite fun picture frame to decorate your picture. 䡲 Color Tones to select a wide variety of color tones for the picture (Auto, Sketch, Emboss, Negative, Sepia, or Monochrome). (The default setting is Auto.
Setting the Flash To activate the flash: 1. From camera mode, select Options ( ) 2. Press the volume key up to select Flash and press 3. Select one of the following options and press 䡲 䡲 䡲 . . Off to deactivate the flash. On This Shot to activate the flash for one shot. Always to activate the flash for all pictures. Setting the Self-Timer To activate the self-timer: 1. From camera mode, select Options ( ). 2. Press the volume key up to select Self-Timer and press . 3.
Taking Multiple Shots This feature allows you to take up to ten continuous shots of one moment. When you take multiple shots, the [ will appear in the viewfinder. ] icon To take multiple shots: 1. From camera mode, select Options ( ). 2. Press the volume key up to select Mult-Shot and press Note: . If your phone’s memory is full, the Mult-Shot option will not appear. . 4. Select one of the following options and press 䢇 䢇 . Series Shot 䡲 Off to deactivate the multiple shots option.
5. Press to take the pictures. (The Multiple Shots folder will display up to four, nine, or sixteen thumbnail pictures per screen.). Note: After taking multiple shots, the pictures are automatically saved in the Memory Card folder. Using the Zoom This feature allows you to zoom in on an object when you take a picture. Depending on your resolution settings, you can adjust the zoom up to 9 levels. To use the zoom: 1. From camera mode, press the volume key up or down. 2. Press to take the picture.
Selecting Camera Settings To select your camera settings: 1. From camera mode, select Options ( ). 2. Press the volume key up to select Settings and press . 3. Select one of the following options and press 䡲 䡲 䡲 䡲 䡲 䡲 Viewing Your Camera’s Status Area Display Section 2J: Using the Built-in Camera 139 Camera 䡲 . Auto Focus to automatically adjust the focus when you depress the camera button. Resolution to select a picture’s file size (2M, 1M, 800, 640, or 320).
Storing Pictures Your phone’s picture storage area is called My Albums. There are three types of folders that can be used separately according to your needs: 䢇 Memory Card 䢇 In Phone 䢇 Online Albums Memory Card Folder If a memory card is installed, the phone will automatically save all new images to the Memory Card. The Memory Card folder allows you to view other pictures, store additional images, or send pictures to the Sprint PCS Picture Mail Web site (www.sprint.
In Phone Folder Options When you are viewing the In Phone folder, press Options ( ) to display the following options: 䢇 Send to send an image to another user using picture mail. 䢇 Upload to upload pictures from the In Phone folder to the Sprint PCS Picture Mail Web site (www.sprint.com/ picturemail). Depending on your settings, you may be prompted to accept a Sprint PCS Vision connection.
Recording Videos In addition to taking pictures, you can also record, view, and send videos to your friends and family with your phone’s built-in video camera. To record a video: 1. Select Menu > Pictures > Camcorder. 2. Select Video Mail (select if you plan on sending the video clip to another user) or Long Video and press (Additional video options are available through the video mode Options menu. See “Video Mode Options” on page 143 for more information.) 3.
6. Select from one of the following options and press 䡲 䡲 䡲 䡲 䡲 䡲 䡲 䡲 : Send Msg to send the video. (See page 145 for details.) Play to play the video that was just captured. Upload to upload the video to online albums. Assign to assign the video as a animated screen saver or ringer. Erase to delete the video. Post to Service to upload a video to a third party online service. Camcorder Mode to return to camcorder mode. Review Videos to review all videos saved in the Memory Card folder.
䢇 Launch to select to select from the following options: 䡲 Review Video (to go to your phone’s In Phone folder. See “In Phone Folder” on page 140 for details.) 䡲 Camera Mode (to switch to Camera mode. See “Taking Pictures” on page 132 for details.) Setting the Movie Light To set the movie light: 1. Select Menu > Pictures > Camcorder. 2. Select Video Mail or Long Video and press 3. Select Options ( . ). 4. Press the volume key up to select Movie Light and press . 5.
Selecting Video Settings To select your camera settings: 1. From camcorder mode, select Options ( ). 2. Press the volume key up to select Settings and press . 3. Select one of the following options and press 䡲 䡲 䡲 Camera 䡲 . Save To to select a where the videos will be saved (Phone or Card). Quality to select the picture quality setting (Fine, Normal, or Economy). Video Length to select between video mail and long video.
Sending Pictures From the In Phone Folder To send pictures from the In Phone folder: 1. Press Menu > Pictures > My Albums > In Phone. 2. Highlight a picture you wish to send and press . (The check box on the upper left corner will be marked. You can select multiple pictures.) 3. Select Options ( ) and press Send. 4. Select To Contacts, Postcard, or Via Bluetooth and press Note: .
Preset Msg or Recent Msg) and select Next ( and exit. (See “Entering Text” on page 41.) ) to save 9. If you wish to include an audio message with the picture, highlight the box next to Audio and select Record ( ). Press to start recording. (Maximum recording time is 30 seconds.) 10. Confirm the recipients, message, audio message, and softkey. Select In Phone and press Next ( 11. Press ). to send the picture.
3. Enter additional recipients or select Next ( ) to continue. 4. Use the navigation key to select one of the following and press 䡲 䡲 䡲 䡲 䡲 䡲 . In Phone Memory Card Online Albums Take New Picture Take New Video Text Only 5. Display the picture you wish to send and press . (You can select multiple pictures.) 6. Select Next ( Tip: ) to continue.
Managing Sprint PCS Picture Mail Using the Sprint PCS Picture Mail Web Site Once you have uploaded pictures from your phone to your online Sprint PCS Picture Mail account at www.sprint.com/ picturemail (see “In Phone Folder Options” on page 141), you can use your personal computer to manage your pictures. From the Sprint PCS Picture Mail Web site (www.sprint.com/ picturemail) you can share pictures, edit album titles, add captions and organize images.
Managing Online Pictures and Videos From Your Phone You can use your phone to manage, edit, or share pictures you have uploaded to the Sprint PCS Picture Mail Web site at www.sprint.com/picturemail. (See “In Phone Folder Options” on page 141 for information about uploading.) To view your online pictures from your phone: 1. Select Menu > Pictures > My Albums > Online Albums. (Depending on your settings you may be prompted to accept a Sprint PCS Vision connection.
Uploading Pictures To upload pictures: 1. Press Menu > Pictures > My Albums (Thumbnail pictures will display.) 2. Select In Phone or Memory Card and press . 3. Select the picture(s) you wish to upload and press Options ( ). 4. Select Upload. and choose My Uploads or My Albums and press . 5. Select Continue ( ) to start uploading.
Downloading Your Online Pictures From your online Sprint PCS Picture Mail albums display at www.sprint.com/picturemail, you can select pictures to download to your phone. To download pictures from the Sprint PCS Picture Mail Web site: 1. From the online pictures display, select the picture you wish to download and press Options ( ). (See “Managing Online Pictures and Videos From Your Phone” on page 150.) 2. Highlight Save to and press . 3. Select one of the following options and press 䡲 䡲 152 .
Sending Online Sprint PCS Picture Mail To send an album from the online pictures menu: 1. From the online albums display, select an album you wish to send and press Send ( ). (See “Managing Online Pictures and Videos From Your Phone” on page 150.) 2. Select Contacts and press . 3. Highlight a recipient or recipients (up to 25) and press . 4. Press Done ( ) when you are finished selecting 5. Press Next ( ). 6.
Accessing Online Picture Options From Your Phone 1. Select a picture from your online Picture Mail. (See “Managing Online Pictures and Videos From Your Phone” on page 150.) 2. Select Options ( ) to display options. 3. To select an option, highlight it and press 䡲 䡲 䡲 154 . Copy/Move to copy or move pictures to a selected album: ⽧ Copy This to copy the selected picture to the album. ⽧ Copy All to copy all pictures in the current album (or Inbox) to the target album.
To access your online Albums options from your Sprint PCS Phone: 1. Display the album list in the Online Sprint PCS Picture Mail menu. (See “Managing Online Pictures and Videos From Your Phone” on page 150.) 2. Use your navigation key to select an album (or Inbox). 3. Select Options ( ) to display options. 4. To select an option, highlight it and press 䡲 䡲 䡲 䡲 Section 2J: Using the Built-in Camera 155 Camera 䡲 . Send to Contact to send the album to a contact. New Album to create a new album.
Biz-Card Scan Biz Card Scan allows you to take a close up image of the text on a business card and then transfer the information to your Contacts using optical character recognition (OCR). Once the image has been captured, you have the option of scrolling through the available fields of information that were recognized by the OCR process. Note: Under certain circumstances, Biz-Card Scan may not recognize characters based on: letter type, letter color, background color, focal distance, etc.
5. When the image is displayed, you must use your navigation key to scroll up or down to highlight the requested information and press . A small icon indicating your choice will be displayed on-screen. The requested information is: 䡲 Select Name: this is the name of the contact. 䡲 Select Mobile: this is mobile number of the contact. 䡲 Select Work: this is the work number of the contact. 䡲 Select Fax: this is the fax number of the contact.
Printing Pictures Using PictBridge PictBridge is an industry standard established by the Camera & Imaging Products Association (CIPA) that enables a range of digital photo solutions including direct photo printing from a digital camera to a printer without the need for a PC. Printing From Your Phone The MM-A940 comes equipped with a built-in camera that allows you to print images directly to a printer using the PictBridge technology.
8. Press the navigation key down to select Size. Press the navigation key left or right to select one of the following sizes: 䡲 4x6 䡲 Default Note: These sizes are may vary and are dependent on the printer’s capabilities. 9. Press the navigation key down to select Type. Press the navigation key left or right to select one of the following: 䡲 Standard: prints the standard image. 䡲 Index: prints the index information. Camera Note: These options may vary and are dependent on the printer’s capabilities.
Settings and Info The settings and info menu allows you to configure where pictures or videos are saved, view your account information, or set the view between portrait or landscape mode. To access the settings and info menu: 1. Select Menu > Pictures > Settings and Info. 2. Select one of the following options and press 䡲 䡲 䡲 160 . Auto Save to select where to save pictures and videos. The available options are Phone and Memory Card.
Sec tion 2K Using Your Phone’s Built-in Media Player In This Section ⽧ Your Multimedia Channel Options ⽧ Accessing Your Media Player's Channel Listings ⽧ Playing a Video or Audio Clip ⽧ Multimedia FAQs Media Player Your Sprint PCS Vision Multimedia Phone's built-in media player gives you the ability to listen to audio clips and view video clips right from your phone's display.
Your Multimedia Channel Options SM Sprint PCS Vision's Sprint TV offers a variety of accessible audio or video channels, depending on your Sprint PCS Service Plan and multimedia subscriptions. Your subscription options include a comprehensive basic service as well as a full menu of a variety of additional channel options. 䢇 Preview Channel: This free channel lets you sample clips from all of the available channels before you make a decision to subscribe.
Accessing Your Media Player's Channel Listings It's easy to access and view the multimedia channel listings on your MM-A940 by Samsung from the phone's main menu. To access your media player and Channel Listings: 䊳 Section 2K: Using Your Phone’s Built-in Media Player 163 Media Player Select Menu > Media Player > Channel Listing. 䡲 My Channels: These include the complimentary Previews channel that Sprint provides, as well as any available individual channels for which you have purchased access.
Playing a Video or Audio Clip To select and play a media clip: 1. Select Menu > Media Player > Channel Listing. 2. Use your keypad to enter a channel number (or use your navigation key to scroll to a channel and press 䡲 䡲 ). My Channels: If you have selected a channel that you've already signed up for (or if it's a channel with no monthly fee), you will see a list of available clips.
Multimedia FAQs 1. How does my phone's Sprint TV Service differ from Sprint PCS Video Mail? Sprint TV Service lets you access high-quality video and audio clips provided by external sources. Video Mail lets you capture, upload and share videos that you personally create with your phone's built-in camcorder. 2. Will I know if I'm receiving an incoming call while I'm viewing or listening to an audio clip? No. All incoming calls will roll into voicemail while you are playing a clip.
5. Are the videos that I'm viewing “live” videos? It depends on the content provider. Some of the channels available through Sprint TV stream live content. Others provide media on demand with video and audio clips that are refreshed throughout the day, but that are not “live.” 6.
10. What does it mean when the video pauses and I see the word “loading” at the bottom of the screen? This happens when the media player is in the process of loading the data necessary to play the clip. It typically occurs when there is heavy traffic on the network. 11. How can I cancel service if I decide I don't want it? To cancel your Sprint TV Service, visit www.sprint.com and sign on to My PCS with your account number and password.
168
Sec tion 2L Using Bluetooth® Wireless Technology In This Section ⽧ Turning Bluetooth On and Off ⽧ Using the Bluetooth Settings Menu ⽧ Bluetooth Profiles ⽧ Pairing Bluetooth Devices ⽧ Sending a Contact Using Bluetooth Your Sprint PCS Phone features built-in Bluetooth technology, allowing you to share information more easily than ever before.
Turning Bluetooth On and Off By default, your device’s Bluetooth functionality is turned off. Turning Bluetooth on makes your device “discoverable” by other in-range Bluetooth devices. To turn Bluetooth on: 1. Select Menu > Settings > Bluetooth> Enable. 2. Press the navigation key up or down to select On and press to enable Bluetooth. To turn Bluetooth off: 1. Select Menu > Settings > Bluetooth> Enable. 2. Press the navigation key up or down to select Off and press to disable Bluetooth.
Using the Bluetooth Settings Menu The Bluetooth Settings menu allows you to set up many of the characteristics of your phone’s Bluetooth service, including: 䢇 Entering or changing the name your phone uses for Bluetooth communication 䢇 Setting your phone’s visibility (or “discoverability”) for other Bluetooth devices 䢇 Displaying your phone’s Bluetooth address. To access the Bluetooth Settings menu: 1. Select Menu > Settings > Bluetooth. 2.
Bluetooth Settings: Visibility The Visibility section of the Bluetooth Settings menu allows you to manage your availability to other Bluetooth devices. To configure your phone’s visibility (discoverability) to other Bluetooth devices: 1. Select Menu > Settings > Bluetooth > Visibility. 2. Select your desired Visibility setting and press 䡲 䡲 䡲 Note: : Always Visible to allow other Bluetooth devices to detect and identify your phone.
Bluetooth Profiles Section 2L: Using Bluetooth® Wireless Technology 173 Using Bluetooth All of the Bluetooth settings you configure are stored in your phone’s Bluetooth user profile. Different profiles can be used for specific Bluetooth functions. 䢇 Headset Profile – This profile functions as a wireless ear jack. When an incoming call is received, the ringer can be heard through the headset, instead of the handset. The call can then be received by pushing a button.
䢇 OPP: Object Push Profile – This profile is based on the Generic Object Exchange (OBEX) profile which uses predefined object formats. The object formats are vcard, vcal, vmsg and vnote. Pairing Bluetooth Devices Paired Devices The Bluetooth pairing process allows you to establish trusted connections between your phone and another Bluetooth device. When devices are paired, a passkey is shared between devices, allowing for fast, secure connections while bypassing the discovery and authentication process.
Sending a Contact Bluetooth technology allows you to send a contact entry saved in your phone to another Bluetooth enabled device by pairing (establishing a connection) between the two devices. The contact information must be accepted by the other device to allow the contact information to be transferred. To send a contact: 1. Press Contacts. 2. Enter the first few letters of the desired contact entry or press up or down to highlight the desired contact. 3. Press Options > Send Contact.
176 Section 2L: Using Bluetooth® Wireless Technology
Section 3 Sprint PCS Service Features
178
Sprint PCS Service Features: The Basics In This Section ⽧ Using Voicemail ⽧ Using SMS Text Messaging ⽧ Using SMS Voice Messaging ⽧ Using Caller ID ⽧ Responding to Call Waiting ⽧ Making a Three-Way Call ⽧ Using Call Forwarding Now that you’ve mastered your phone’s fundamentals, it’s time to explore the calling features that enhance your Sprint PCS Service. This section outlines your basic Sprint PCS Service features.
Using Voicemail Setting Up Your Voicemail All unanswered calls to your Sprint PCS Phone are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your Sprint PCS Voicemail and personal greeting as soon as your phone is activated. To set up your voicemail: 1. Press and hold . 2.
Sprint PCS Service Voicemail Notification There are several ways your Sprint PCS Phone alerts you of a new message: 䢇 By displaying a message on the screen. 䢇 By sounding the assigned ringer type. 䢇 By the LED blinking red. New Voicemail Message Alerts When you receive a new voice message, your phone alerts you and prompts you to call your voicemail. To call your voicemail: 䊳 Press and hold . To display your Missed Log: 䊳 Note: Press the navigation key up.
Retrieving Your Voicemail Messages You can review your messages directly from your Sprint PCS Phone or from any other touch-tone phone. To dial from your Sprint PCS Phone, you can either speed dial your voicemail or use the menu keys. Using One-Touch Message Access 䊳 Press and hold box.) . (Your phone will dial your voicemail Using the Menu Keys on Your Phone to Access Your Messages 1. Select Menu > Messaging > Voicemail. > Call Voicemail. 2. Press Note: to listen to your messages.
Here’s a quick guide to your keypad functions while listening to voicemail messages. For further details and menu options, see “Voicemail Menu Key” on page 187. Date/Time Send Reply Advance Replay Rewind Forward Erase Call Back Save Cancel Help Skip Voicemail Options Your Sprint PCS Phone offers several options for organizing and accessing your voicemail.
3. Press for Expert Mode. 4. Press to turn Expert Mode on or off. Setting Up Group Distribution Lists Create up to 20 separate group lists, each with up to 20 customers. 1. Press and hold to access your voicemail. (If your voicemail box contains any new or saved messages, press to access the main voicemail menu.) 2. Press to change your Personal Options, following the system prompts. 3. Press for Administrative Options. 4. Press for Group Distribution Lists. 5.
message. Voicemail-to-Voicemail Message Reply Reply to a voice message received from any other Sprint PCS Voicemail user. 1. After listening to a voice message, press . 2. Follow the voice prompts to record and send your reply. Voicemail-to-Voicemail Message Forwarding Forward a voice message, except those marked “Private,” to other Sprint PCS Voicemail users. 1. After listening to a message, press and then . 2. Follow the voice prompts to enter the phone number. 3.
Continue Recording When leaving a voice message, you can choose to continue recording even after you’ve stopped. 䊳 Before pressing to indicate that you are satisfied with the message you recorded, press recording. to continue Extended Absence Greeting When your phone is turned off or you are off the Nationwide Sprint PCS Network for an extended period, this greeting can be played instead of your normal personal greeting. 1. From the main voicemail menu, press for Personal Options. 2.
Sprint PCS Service Voicemail Menu Key Following the prompts on the voicemail system, you can use your keypad to navigate through the voicemail menu. The following list outlines your phone’s voicemail menu structure.
Message Date & Time On/Off Change Pass code Group Distribution List Return to Personal Options Menu Greetings Personal Greetings Name Announcement Extended Absence Greeting Return to Personal Options Menu Expert Mode (On/Off) Place a Call Disconnect Using SMS Text Messaging With SMS Text Messaging, you can use a person’s wireless phone number to send instant text messages from your Sprint PCS Phone to their messaging-ready phone – and they can send messages to you.
Sprint PCS Service Composing SMS Text Messages To compose an SMS Text message: 1. Select Menu > Messaging > Send Message > Text and select the entry method you prefer. 2. Select Contacts, Mobile #, or Email and press . 3. Enter the number or email address or select the contact and select Next ( ). (You may include up to 10 recipients per message.) 4. Compose a message using one of the following methods: 䡲 To type a message, use your keypad to enter your message.
Accessing SMS Text Messages To read a SMS Text Messages: 䊳 When you receive a text message, it will automatically appear on your phone’s main display screen. Use your navigation key to scroll down and view the entire message. To reply to a SMS Text Messages: 1. While the message is open, select Reply ( ). 2. Compose your reply or use the pre-set messages or icons. 䡲 To type a message, use your keypad to enter your message. Use 䡲 to select a character input mode.
Preset messages make sending text messages to your friends, family, and co-workers easier than ever. To add and/or edit preset messages: 1. Select Menu > Messaging > Settings > General > Preset Messages. 2. Select Options ( ) and press Add New. – or – Highlight a message you wish to edit and select Options ( ) and press Erase or select Edit ( ). 3. Enter your new message or changes and press . (See “Entering Text” on page 41.
Using SMS Voice Messaging In addition to sending and receiving SMS Text Messages, your phone is enabled with SMS Voice Messaging. With SMS Voice Messaging, you can quickly and easily send a voice message to other SMS-enabled Sprint PCS Phones or working email addresses without making a phone call. Just record a message and send it directly to the recipient’s phone messaging inbox. Playing an SMS Voice Message To play an SMS Voice message from the main menu: 1. Select Menu > Messaging > VoiceSMS. 2.
Sprint PCS Service Composing SMS Voice Messages To compose an SMS Voice message: 1. Select Menu > Messaging > Send Message > VoiceSMS. 2. Select Mobile # or Email to enter a recipient’s wireless phone number or email address directly or select a contact from your Contacts list. 3. Press and select Contacts Entry. 4. Press Next ( ) when you are finished selecting and entering recipients. 5. Start recording after the beep. (You can record up to two minutes.) 6. To finish recording, press Done ( 7.
Accessing SMS Voice Messages To play an SMS Voice message: 䊳 When you receive a voice message, a pop-up notification will automatically appear on your phone’s main display screen. Use your softkeys to view and play the voice message. To reply to an SMS Voice message: 1. From the SMS Voice inbox, press Reply ( ) and record your message after the beep. 2. Press Done ( ) to send your message.
When you’re on a call, Call Waiting alerts you of incoming calls by sounding one beep. Your phone’s screen informs you that another call is coming in and displays the caller’s phone number (if it is available and you are in digital mode). To respond to an incoming call while you’re on a call: 䊳 Press . (This puts the first caller on hold and answers the second call.) To switch back to the first caller: 䊳 Tip: Press again.
Making a Three-Way Call With Three-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls. To make a Three-Way Call: 1. Enter a number you wish to call and press . 2. Once you have established the connection, enter the second number you wish to call and press . (This puts the first caller on hold and dials the second number.) 3.
Call Forwarding lets you forward all your incoming calls to another phone number – even when your phone is turned off. You can continue to make calls from your phone when Call Forwarding is activated. To activate Call Forwarding: 1. Press . 2. Enter the area code and phone number to which your future calls should be forwarded. 3. Press . (You will see a message and hear a tone to confirm the activation of Call Forwarding.) To deactivate Call Forwarding: 1. Press 2. Press . .
198 Section 3A: Sprint PCS Service Features: The Basics
Sec tion 3B Sprint PCS Vision Sprint PCS VisionSM In This Section ⽧ Sprint PCS Vision Applications ⽧ Getting Started With Sprint PCS Vision ⽧ Accessing Messaging ⽧ Downloading Premium Services Content ⽧ Exploring the Web ⽧ Sprint PCS Vision FAQs Sprint PCS VisionSM offers easy and amazing data services you will really use.
Sprint PCS Vision Applications Here is a brief list of the applications available through your Sprint Power Vision Phone. For more information, please see the Sprint PCS Vision User Guide online at www.sprint.com. Sprint PCS Picture MailSM Take digital pictures with your Sprint Power Vision Picture Phone and send them to email addresses or to other Sprint PCS Vision Phones.
Getting Started With Sprint PCS Vision Your User Name When you buy a Sprint Power Vision Phone and sign up for service, you're automatically assigned a User name, which is typically based on your name and a number, followed by “@sprint.com.” (For example, the third John Smith to sign up for Sprint PCS Vision services might have jsmith003@sprint.com as his User name.) When you use Sprint PCS Vision services, your User name is submitted to identify you to the Nationwide Sprint PCS Network.
䢇 On your Sprint Power Vision Phone. You can find your User name under the Phone Info option in your phone's Settings menu (Menu > Settings > Phone Info > Phone Number). Launching a Sprint PCS Vision Connection To launch a Sprint PCS Vision connection: 䊳 Select Menu > Web. (Your Sprint PCS Vision connection will launch and the Sprint PCS Vision home page will display.) The Sprint PCS Vision Home Page Shortcut: Note: You can also press the navigation key right to launch the Web.
open, you are not currently in an active data session - that is, no data is being sent or received. As soon as you navigate to another page, the active session will launch and you will see the “Connecting...” message. When you first connect to the Web, the Net Guard will appear to confirm that you want to connect. This feature helps you avoid accidental connections. You can disable the Net Guard in the future by selecting Always Auto-Connect when the Net Guard is displayed.
Your Sprint PCS Vision connection is dormant (no data is being sent or received). Though not currently active, when dormant the phone can restart an active connection quickly; voice calls can be made and received. Your phone is not currently able to access Sprint PCS Vision service features. Your phone is connected to a high-speed Sprint Power Vision connection. A high-speed Sprint Power Vision connection is available. The high-speed Sprint Power Vision connection is dormant.
Navigating the Web Softkeys During a Sprint PCS Vision session, the bottom line of your phone's display contains one or more softkeys. These keys are shortcut controls for navigating around the Web, and they correspond to the softkey buttons directly below the phone’s display screen. Tip: Depending on which Web sites you visit, the labels on the softkeys may change to indicate their function. To use softkeys: 䊳 Press the desired softkey button.
Selecting Once you've learned how to use softkeys and scroll, you can start navigating the Web. To select on-screen items: 䊳 Use the navigation key to highlight the desired item, then press the desired softkey button (or press Tip: ). You’ll find that the left softkey is used primarily for selecting items. This softkey is often labeled “OK.” If the items on a page are numbered, you can use your keypad (number keys) to select an item.
Sprint PCS Messaging Sprint PCS Vision Accessing Messaging You can send and receive emails and text messages and participate in Web-based chatrooms right from your Sprint Power Vision Phone. Messaging allows you to stay connected to friends, family, and co-workers 24 hours a day anywhere on the Nationwide Sprint PCS Network. Message Types There are many types of text messaging available on your phone. These include SMS Text and SMS Voice Messaging, Instant Messaging, Email, and Chat.
For information and instructions about reading, replying to, and composing Sprint PCS Mail, please see the Sprint PCS Vision User’s Guide at www.sprint.com. Accessing Additional Email Providers With Sprint PCS Vision, you can use popular email services such as AOL® Mail, Yahoo!® Mail, MSN Hotmail and EarthLink® to keep in touch, even while you’re on the go. To access email providers from your phone: 1. From the Sprint PCS Vision home page, select Messaging > Email. 2.
Accessing Instant Messaging To access instant messaging clients from your phone: 1. From the Sprint PCS Vision home page, select Messaging > IM&Email. 2. Select an email provider, such as AOL Instant Messenger, MSN Messenger, or Yahoo! Messenger. 3. Use your keypad to enter the required sign in information for the selected provider, such as user name and/or password, and select Sign In. (Your IM screen for the selected provider will display.
Accessing Wireless Chatrooms Sprint PCS Vision gives you the ability to join wireless chatrooms from your Sprint Power Vision Phone, to send text messages and icons to chatroom participants, or to launch a one-on-one (private) chatroom. To access a chatroom from the browser: 1. Press the navigation key right to launch the browser. 2. Select Messaging > Chat & Dating >Jumbuck. (You will see a disclaimer for Wireless Chat.) 3. Select I Agree ( ) to accept the disclaimer. 4.
Downloading Premium Services Content Accessing the Download Menus To access the Sprint PCS Vision download menus: 1. Select Menu > My Content. 2. Select the type of file you wish to download (Games, Ringers, Screen Savers, Applications, IM & Email, or Call Tones) and press . 3. Select Get New and press . To access the Sprint PCS Vision download menus from the Web browser: 1. From the Sprint PCS Vision home page, select Downloads. 2.
Selecting an Item to Download You can search for available items to download in a number of ways: 䢇 Featured displays a rotating selection of featured items. 䢇 Categories allows you to narrow your search to a general category, such as Movie/TV Themes for Ringers or College Logos for Screen Savers. (There may be several pages of available content in a list. Select Next 9 to view additional items.) 䢇 Search allows you to use your keypad to enter search criteria to locate an item.
2. Select an option to continue: 䡲 Select Shop ( ) to browse for other items to download. 䡲 Press mode. to quit the browser and return to standby Using My Content Manager Whether you purchase your Premium Services content from your Sprint PCS Phone or from your online account management page at www.sprint.com, all of your purchases are stored in My Content Manager and may be downloaded to your phone from there.
To download purchased content from My Content Manager: 1. From the My Content Manager display (see above), highlight the item you wish to download and press . (The information page for the selected item will display.) 2. Scroll to highlight Download and press . (The item will download automatically. When the New Download screen appears, the item has been successfully downloaded to your phone.) 3.
Web With Web access on your Sprint Power Vision Phone, you can browse full-color graphic versions of your favorite Web sites, making it easier than ever to stay informed while on the go. Follow sports scores and breaking news and weather and shop on your Sprint Power Vision Phone anywhere on the Nationwide Sprint PCS Network.
Opening the Browser Menu The browser menu may be opened anytime you have an active Sprint PCS Vision session, from any page you are viewing. To open the browser menu: 䊳 Press . (The browser menu will display in a dropdown list.) Options available under the browser menu include: 䢇 Home. Returns the browser to the Sprint PCS Vision home page. 䢇 Forward. Returns you to a previously viewed page (after having used the 䢇 䢇 䢇 䢇 䢇 䢇 key). Mark this Page Allows you to bookmark the current site.
䡲 Creating a Bookmark Bookmarks allow you to store the address of your favorite Web sites for easy access at a later time. To create a bookmark: 1. Go to the Web page you want to mark. 2. Press to open the browser menu. 3. Select Mark this Page and press to save the bookmark. 4. Press Note: to exit popup screen. Bookmarking a page does not store the page contents, just its address. Some pages cannot be bookmarked. Whether a particular web page may be marked is controlled by its creator.
Deleting a Bookmark To delete a bookmark: 1. Press to open the browser menu. 2. Select View Bookmarks. 3. Scroll to highlight the bookmark you’d like to delete and press Options ( ). 4. Select Delete and press 5. Select OK ( 6. Press . ) to confirm and remove the bookmark. to exit popup screen. Going to a Specific Web site To go to a particular Web site by entering a URL (Web site address): 1. Press to open the browser menu. 2. Select Go to URL. 3. Select the URL field and press . 4.
Reloading a Web Page To reload (refresh) a Web page: 1. Press to open the browser menu. Sprint PCS Vision 2. Select Refresh this Page. (The browser will reload the current Web page.) Restarting the Web Browser If the Web browser appears to be malfunctioning or stops responding, you can usually fix the problem by simply restarting the browser. To restart the Web browser: 1. Press to open the browser menu. 2. Select More > Restart Browser.
How do I know when my phone is connected to Sprint PCS Vision services? Your phone automatically connects when Sprint PCS Vision service is used or an incoming message arrives. Your phone will also display the indicator. When you enter an area in which Sprint Power Vision service is available, you will see the icon. Can I make calls and use Sprint PCS Vision services at the same time? You cannot use voice and Sprint PCS Vision services simultaneously.
Can I sign out of data services? Section 3B: Sprint PCS Vision 221 Sprint PCS Vision You can sign out without turning off your phone; however, you will not be able to browse the Web or use other Sprint PCS Vision services. While signed out, you can still place or receive phone calls, check voicemail, and use other voice services. You may sign in again at any time. To sign out, go to Settings > Power Vision > Disable PCS Vision in your phone’s menu.
222 Section 3B: Sprint PCS Vision
S ec ti o n 3 C Sprint Power VisionSM In This Section Getting to Know Sprint Power Vision ⽧ Exploring the Sprint Music Store ⽧ Personalizing Your Service With On Demand ⽧ Using Your Sprint PCS Phone as a Modem Sprint Power Vision ⽧ SM SM With Sprint Power Vision enjoy the next generation wireless data experience.
Getting to Know Sprint Power Vision Sprint Power Vision combines unmatched visual and sound clarity with Broadband-like speeds on your wireless phone. Utilizing the fastest commercially available wireless network technology (1xEV-DO) and leveraging continued investment in handset and application development, Sprint Power Vision offers the ultimate in wireless entertainment, real imaging solutions, instant communication, and a personalized information experience at Broadband-like speeds.
SM Exploring the Sprint Music Store Your Sprint Power Vision service allows you to access the Sprint Music Store, an online music distribution site that lets you purchase and download digital music files to play on your Sprint Power Vision Multimedia Phone. Accessing the Sprint Music Store To access the Sprint Music Store: 1. Select Menu > Music. 2. Follow the onscreen instructions to establish your User ID and password.
Purchasing and Downloading Music Now that you’re in the store, you can shop for songs to purchase and download to your phone’s TransFLASH card. To find and download music files from the Sprint Music Store: 1. From the Sprint Music Store opening page, select an option to browse the store: 䡲 Featured Music offers a revolving selection of highlighted songs and artists. 䡲 Categories allows you to choose from categories such as What’s Hot, New Releases, and specific musical genres.
Backing Up Your Downloaded Music Files Sprint recommends you back up your AAC+ music files to your PC so you may access the files in case your TransFLASH card is lost or damaged, or if you install a new TransFLASH card. To back up your downloaded music files: 1. Open the TransFLASH access panel on the bottom left side of the phone and press in on the TransFLASH card to release the locking mechanism. 2. Remove the TransFLASH memory card and insert into the SD card adapter. 3.
Playing Music From the Sprint Music Store The Sprint Music Store not only gives you access to great music, it also gives you a place to listen to and organize your music library. Accessing the Music Player 1. From the Sprint Music Store opening page, use your right navigation key to select the Player tab. 2. From the Player display, select an option: 䡲 䡲 䡲 All My Music to browse through all of your downloaded music. to select a customized playlist you’ve created to organize your music.
Personalizing Your Service With On Demand On Demand acts like a PC browser’s customized home page, displaying a variety of top categories such as News, Sports, Weather, Money, Movies, and more, tailored to your preferred area. These categories and the associated information are updated continuously throughout the day, so you’ll always be up-to-date and in-the-know.
Accessing On Demand Information Finding the information you’re looking for with On Demand is as easy as navigating a Web browser on your PC. (The following examples will illustrate how to access News and Movies information.) To access News information using On Demand: 1. Select Menu > On Demand. (The On Demand menu screen will display.) 2. From the On Demand menu screen, highlight a category (in this case, News) and press . 3.
To access Movie information using On Demand: 1. From the On Demand menu screen, highlight Movie and press . (A list of current movie titles will display.) 2. Select a movie title and press . 3.
Using Your Sprint PCS Phone as a Modem Your Sprint Power Vision Multimedia Phone's data capabilities enable you to use your phone's high-speed data connection as a modem for your desktop or laptop PC. You'll be able to send and receive email, browse the Internet, and access your company's network anywhere on the Nationwide Sprint PCS Network. Note: To use this service, you are required to sign up on a Sprint Power Vision with Phone as Modem plan. Go to www.sprint.
5. Once the connection is established, launch an Internet session, check your email, or do anything else you would do using a traditional data connection. 6. When you’re ready to terminate the data connection, double-click on the Sprint Power Vision Connection Manager icon in the system tray, then click Disconnect to end the session. 7. Disconnect the USB cable from your phone and your PC.
234
Sec tion 3D Sprint PCS Voice CommandSM In This Section Getting Started With Sprint PCS Voice Command ⽧ Creating Your Own Address Book ⽧ Making a Call With Sprint PCS Voice Command ⽧ Accessing Information Using Sprint PCS Voice Command Voice Command ⽧ With Sprint PCS, reaching your friends, family, and coworkers has never been easier – especially when you’re on the go. You can even listen to Web-based information, such as news, weather, and sports.
Getting Started With Sprint PCS Voice Command With Sprint PCS Voice Command: 䢇 You can store all your contacts’ phone numbers, so you can simply say the name of the person you want to call. 䢇 There’s no need to punch in a lot of numbers, memorize voicemail passwords, or try to dial while you’re driving. 䢇 You can call anyone in your address book – even if you don’t remember their phone number. 䢇 You don’t need to worry about losing your contacts or address book.
Creating Your Own Address Book You can program up to 500 phone numbers, and with the advanced technology of Sprint PCS Voice Command, you can have instant access to all of them. 䢇 䢇 Use Voice Recordings. Simply dial and say, “Add name.” You will then be asked to say the name and number you want to add to your personal address book. Your address book can store up to 20 voice recorded names at once. Call Directory Assistance.
Making a Call With Sprint PCS Voice Command To make a call with Sprint PCS Voice Command: 1. Press and you’ll hear the “Ready” prompt. 2. After the “Ready” prompt, simply say, in a natural voice, “Call” and the name of the person or the number you’d like to call. (For example, you can say, “Call Jane Smith at work,” “Call John Baker on the mobile phone,” “Call 5551234,” or “Call Bob Miller.”) 3. Your request will be repeated and you will be asked to verify. Say “Yes” to call the number or person.
Accessing Information Using Sprint PCS Voice Command To access information using Sprint PCS Voice Command: 1. Press . 2. Say “Call the Web” and choose from a listing of information categories like news, weather, and sports. – or – Simply say “Call news room,” “Call the weather,” “Call Sports Central,” etc. Voice Command Note: Sprint PCS Voice Command is not available while roaming off the Nationwide Sprint PCS Network.
240
Section 4 Safety and Warranty Information
242
Section 4A Important Safety Information In This Section General Precautions ⽧ Maintaining Safe Use of and Access to Your Phone ⽧ Caring for the Battery ⽧ Radiofrequency (RF) Energy ⽧ Radiofrequency (RF) Energy ⽧ Owner’s Record ⽧ Phone Guide Proprietary Notice Important Safety Information ⽧ This phone guide contains important operational and safety information that will help you safely use your phone.
General Precautions There are several simple guidelines to operating your phone properly and Speak directly into the mouthpiece. 䢇 Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and remove the battery. 䢇 Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending, or sitting on it.
Maintaining Safe Use of and Access to Your Phone Do Not Rely on Your Phone for Emergency Calls Mobile phones operate using radio signals, which cannot guarantee connection in all conditions. Therefore you should never rely solely upon any mobile phone for essential communication (e.g., medical emergencies). Emergency calls may not be possible on all cellular networks or when certain network services and/or mobile phone features are in use. Check with your local service provider for details.
Note: Always turn off the phone in health care facilities and request permission before using the phone near medical equipment. Turning Off Your Phone Before Flying Turn off your phone before boarding any aircraft. To prevent possible interference with aircraft systems, the U.S. Federal Aviation Administration (FAA) regulations require you to have permission from a crew member to use your phone while the plane is on the ground.
Caring for the Battery Protecting Your Battery The guidelines listed below help you get the most out of your battery’s performance. Recently, there have been some public reports of wireless phone batteries overheating, catching fire or exploding. It appears that many, if not all, of these reports involve counterfeit or inexpensive, aftermarket-brand batteries with unknown or questionable manufacturing standards.
Disposal of Lithium Ion (Li-Ion) Batteries For safe disposal options of your Li-Ion batteries, contact your nearest Sprint authorized service center. Special Note: Be sure to dispose of your battery properly. In some areas, the disposal of batteries in household or business trash may be prohibited.
Radiofrequency (RF) Energy Understanding How Your Phone Operates Your phone is basically a radio transmitter and receiver. When it’s turned on, it receives and transmits radiofrequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital mode. Knowing Radio Frequency Safety The design of your Sprint PCS Phone complies with updated NCRP standards described below.
phone meets strict federal guidelines. Variations in SARs do not represent a variation in safety. All phones must meet the federal standard, which incorporates a substantial margin of safety. As stated above, variations in SAR values between different model phones do not mean variations in safety. SAR values at or below the federal standard of 1.6 W/kg are considered safe for use by the public. The highest reported SAR values of the MM-A940 are: PCS mode (Part 24): Head:0.999 W/kg; Body-worn: 1.
Owner’s Record The model number, regulatory number and serial number are located on a nameplate inside the battery compartment. Record the serial number in the space provided below. This will be helpful if you need to contact us about your phone in the future. Model: Sprint Power Vision Multimedia Phone MM-A940 by Samsung® Serial No.
252 Section 4A: Important Safety Information
Sec tion 4B Manufacturer’s Warranty In This Section ⽧ Manufacturer’s Warranty Your Sprint PCS Phone has been designed to provide you with reliable, worry-free service. If for any reason you have a problem with your equipment, please refer to the manufacturer’s warranty in this section. For information regarding the terms and conditions of service for your Sprint PCS Phone, please visit www.sprint.
Manufacturer’s Warranty STANDARD LIMITED WARRANTY What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.
What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to Purchaser, any defective component part of Product.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of SAMSUNG are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on SAMSUNG.
258 Section 4B: Manufacturer’s Warranty
Index Numerics 3-Way Calling 196 A Abbreviated Dialing 64 Airplane Mode 60 Alarm Clock 103 Answering Calls 32 Auto Answer Mode 63 B Backlight 51 Battery 25–27 Capacity 25 Charging 27 Installing 26 Bluetooth 169–175 Bookmarks Accessing 217 Creating 217 Deleting 218 Browser Menu 215 Index D Dialing Options 31 Display Language 63 Display Screen 18, 52 Downloads Sprint PCS Vision 211 E Email 208 Entering Text 41–44 ABC Mode 43 Emoticons 44 Numbers 44 Preset Messages 44 Symbols 44 T9 Text Input 42 Index C Ca
L Location Settings 56 Lock Code Changing 70 Locking Your Phone 68 M Making Calls 30 Media Player 161–167 Playing Video and Audio Clips 164 Memo Pad 105 Menu Style 53 Messaging Deleting Old Messages 58 Setting Alerts 57 Signature 58 Multimedia Channel Listings 163 Channel Options 162 FAQs 165 My Content Erasing 73 My Content Manager 213 N Net Guard 203 P Phone (Illus.
Sprint PCS Power Vision Security Features 75 Sprint PCS Service Account Passwords 6 Dialing Sprint PCS Services 97 Directory Assistance 8 Setting Up 3 Sprint PCS Vision 199–221 Applications 200 Chat 210 Downloading Content 211 FAQs 219 Home Page 202 Launching 202 Messaging 207 My Content Manager 213 Navigating the Web 205 Net Guard 203 User Name 201 Sprint PCS Voice Command 235–239 Address Book 237 Making a Call 238 Sprint Service Operator Services 9 Storing Pictures 140 U Unlocking Your Phone 69 V Videos
