MM-D330D DVD MICRO COMPONENT SYSTEM user manual Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register MM-D330D-ENG-0207.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Safety Information Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Holding discs • Do not touch the playback side of the disc. • Hold the disc by the edges so that fingerprints will not get on the surface. • Do not stick paper or tape on the disc. License • ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc.
Contents 2 3 3 3 3 3 Safety Warnings Accessories Cautions on Handling and Storing Discs License Copyright Copy Protection GETTING STARTED 5 5 6 9 9 9 10 11 Precautions Icons that will be used in manual Disc Types and Characteristics Description Front Panel Top Panel Rear Panel Remote control CONNECTIONS 12 13 14 15 15 Connecting the Speakers Connecting the Video Out to your TV Connecting External Components Connecting the FM Antenna Connecting Headphones SETUP 16 16 17 17 17 17 17 18 18 18 18 18 18
USB Function Recording Function OTHER INFORMATION 33 34 35 Troubleshooting Language code list Specifications 31 33 Getting Started 31 31 01 ADVANCED FUNCTIONS Getting Started Precautions Icons that will be used in manual Make sure to check the following terms before reading the user manual. Icon Term Definition d DVD This involves a function available with DVD-Video or DVD±R/±RW discs that have been recorded and finalised in Video Mode.
Getting Started Disc Types and Characteristics Disc types that can be played Disc Types & Mark (Logo) Region Code Recorded Signals The product and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. Disc Type DVD-VIDEO Region Code 12 cm Area 1 2 The U.S., U.S.
01 • Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played. • MP3 file names should contain no blank spaces or special characters (. / = +). • Use discs recorded with a compression/ decompression data rate greater than 128Kbps. • Only files with the ".mp3" and ".MP3" extensions can be played. • Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc, the disc can be played only up to the blank segment.
Getting Started USB Host Specification USB Host Specification • Supports USB 1.1 or USB 2.0 compliant devices. • Supports devices connected using the USB A type cable. • Supports UMS (USB Mass Storage Device) V1.0 compliant devices. • Supports the device of which the connected drive is formatted in the FAT (FAT, FAT16, FAT32) file system. Non-compliance • Does not support a device that requires installing a separate driver on the PC (Windows). • Does not support connection to a USB hub.
01 Description Getting Started Front Panel 6 1 5V 500mA AUX IN 2 1. 2. 3. 4. 5. 6. 3 PHONES 4 5 WINDOW DISPLAY COMPACT DISC COMPARTMENT USB JACK AUX IN JACK PHONES JACK VOLUME CONTROL BUTTON Top Panel 1. 2. 3. 4. 5. 6. 7. 8. POWER BUTTON USE REC BUTTON FUNCTION BUTTON SKIP/SEARCH FUNCTION BUTTON TUNING MODE OR STOP BUTTON PLAY/PAUSE BUTTON SKIP/SEARCH FUNCTION BUTTON OPEN/CLOSE BUTTON USB REC 1 2 3 4 5 6 7 8 English MM-D330D-ENG-0207.
Getting Started Rear Panel PB Y COMPONENT OUT 5 ONLY FOR SERVICE PR SPEAKERS OUT 8 1 VIDEO OUT 2 3 4 1 2.0 CHANNEL SPEAKER OUTPUT CONNECTORS Connect the front speakers. 2 ONLY FOR SERVICE This jack is just for testing,please don't use it. 3 FM ANTENNA JACK Connect the FM antenna. 4 VIDEO OUT JACK Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack. 5 COMPONENT VIDEO OUTPUT JACKS Connect a TV with Component video inputs to these jacks.
01 Getting Started Remote control Tour of the Remote Control FUNCTION button POWER button MO/ST, B button DISPLAY, A button TIMER/CLOCK button TIMER ON/OFF button TITLE MENU button DISC MENU button REPEAT button DVD* button SOUND, C button EQ, D button SLEEP button Number(0~9) button SYNC *button CD REC SPEED button VOL + button PAUSE button SKIP, RDS DISPLAY* button PLAY button SEARCH button button TUNING RETURN button VOL - button USB REC button SKIP, RDS PTY* button STOP button SEARCH button MENU but
Connections Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers PB Y COMPONENT OUT ONLY FOR SERVICE SPEAKERS OUT 8 PR VIDEO OUT Position of the product Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TV's 6.56 ~ 7.87 feet (2~2.4 m) For 55" TV's 11.
02 Connections Connections Connecting the Video Out to your TV Choose one method for connecting to a TV.
Connections Connecting External Components 500mA AUX IN PHONES Connecting an External Analog Component Analog signal components such as a VCR. 1. Connect AUX IN (Audio) on the player to the Audio Out of the external analog component. 2. Press the F ( ) button to select AUX input. You can select AUX by pressing the FUNCTION button on the remote control. 14 MM-D330D-ENG-0207.
02 Connections Connections Connecting the FM Antenna PB FM Antenna (supplied) ONLY FOR SERVICE SPEAKERS OUT 8 Y COMPONENT OUT PR VIDEO OUT 1. Connect the FM antenna supplied to the FM Antenna jack. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. ✎ NOTE This product does not receive AM broadcasts.
Setup Before Starting (Initial Setting) 1. Press the POWER button when it is plugged in TV for the first time. Initial Setting screen will be displayed. Setting the Setup menu The access step may differ depending on the selected menu. The GUI (Graphical User Interface) in this manual may differ, depending on the firmware version. Initial setting | On-Screen Language Select a language for the on-screen displays. 1 2 English 한국어 3 Nederlands Français Deutsch 4 Italiano Move Select 2.
03 Setup Display Audio You can configure various display optionals such as the TV Aspect. DRC (Dynamic Range Compression) TV Aspect This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. Depending on the type of television you have, you may want to adjust the screen setting.
Setup Security System Initial Setting By using the Initial Setting, you can set language and TV aspect setting. The Parental Lock function works in conjunction with DVDs that have been assigned a rating which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. Parental Rating DivX(R) Registration View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content. Select the rating level you want to set.
Audio CD(CD-DA)/MP3/WMA Playback 2. Place a disc gently into the disc Compartment with the disc's label facing up. Basic Functions 3. Press the OPEN/CLOSE button to close the disc Compartment. Track01 1/17 ✎ NOTE ※ Resume function: When you stop disc play, the product remembers where you stopped, so when you press PLAY button again, it will pick up where you left off. (This function works only with DVDs.) Press the STOP button twice during playback to disable the Resume function.
Basic Functions JPEG File Playback Using the Playback Function Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this product. Forward/Reverse Search dBAD 1. Insert a JPEG disc on the disc Compartment. 2. Press the ◄,► buttons to select the Photos, and then press the ENTER button. Press the buttons for Search Function. 3. Press the ▲▼ buttons to select the folder you want to play, and then press the ENTER button. 4.
04 Using the Disc Menu d dD Press the PAUSE button repeatedly. • The picture moves forward one frame each time the button is pressed during playback. You can view the menus for the audio language, subtitle language, profile, etc. ✎ NOTE 1. During playback, press and hold the DISC MENU button on the remote control. No sound is heard during step motion playback. Basic Functions Step Motion Play 2. Press the ▲▼◄► buttons to make the desired selection, then press the ENTER button.
Basic Functions Repeat Playback A-B Repeat Playback dBAD dB DVD/DivX Repeat You can repeatedly play back a designated section of a DVD or CD. You can repeat the title, chapter or the section(A-B Repeat) of the DVD/DivX. 1. During the DVD disc or CD playback, press and hold the REPEAT button on the remote control. Repeat Off 2. For DVD, press the ▲▼ buttons to select A-. For CD press and hold the REPEAT button appears on the TV. repeatedly until 3.
04 d 03/04 001/001 0:00:21 KO 1/2 EN 02/02 1/1 Change Select D 2/3 KO 1/2 EN 02/02 Change when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified as a Title. ) : Most DVD discs are Chapter( recorded in chapters so that you can quickly find a specific chapter. Playing time( ) : Allows playback of the film from a desired time. You must enter the starting time as a reference.
Basic Functions Selecting the Subtitle Language dD Angle Function d 1. Press the TOOLS button. 2. Press the ▲▼ buttons to select SUBTITLE ( display. ) 3. Press the ◄► buttons to select the desired subtitle language. • Depending on the number of languages on a DVD disc, a different subtitle language is selected each time the button is pressed. This function allows you to view the same scene in different angles. 1. Press the TOOLS button. 2. Press the ▲▼ buttons to select ANGLE ( display. ) 3.
04 Basic Functions Sound Mode EQ Your micro-compact system is equipped with a preset equalizer that allows you to choose the most appropriate balance between treble and bass frequencies, according to the type of music you are listening to. 1. Press the EQ button until the required optional is selected. Select... To obtain a... OFF ......................... Normal balance (linear) RANCHA ................. Banlace suitable for Rancha Music. SAMBA.................... Banlace suitable for Samba Music.
Basic Functions Mute Function Display Function This is useful when answering a doorbell or telephone call. You can view all functions available on the display, adjust the brightness of the display. 1. Press MUTE button: 1. Each time you press and hold the DISPLAY button on the remote control, the display mode will change as follows: ‘ MUTE ’ appears in the display. To switch the sound back on, press the MUTE button again or the VOL-, + button.
04 Using buttons on the Remote Control 1. Press the FUNCTION button to select FM. 2. Tune in to the desired station. • Automatic Tuning 1 : Press the STOP button to select PRE 01 and then press TUNING ( ) buttons to select the preset station. • Automatic Tuning 2 : Press the STOP button to select MANUAL and then press and hold ) button to automatically the TUNING ( search for active broadcasting stations.
Basic Functions • CT (Clock Time) : Decodes the real time clock from the FM frequency. Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases. • TA (Traffic Announcement) : When this symbol flashes it shows that the traffic announcement is in progress. ✎ NOTE RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak.
04 For each step, you have a few seconds to set the required optionals. If you exceed this time, you must start again. Timer Function The timer enables you to switch the system on or off at specific times automatically. 1. Switch the system on by pressing the POWER button. 2. Press and hold TIMER/CLOCK button and then press the ENTER button. Result: "CLOCK" is displayed. 3. Press ENTER. Result: The hour flashes. Decrease the hours: ◄ Increase the hours: ► 4.
Basic Functions Sleep Timer Function 8. Press the ENTER ( ) button. You can set the time that the DVD player will shut itself off. Result: CHK REC (Do you want to record?) is displayed. 9. Press the ENTER ( ) button. Result: REC N is displayed, you can press the ◄ or ► button to select the REC Y or REC N, and then press ENTER button. 1). If you select the REC N, it will cancel tuner timing recording even if you have already set the tuner timing recording. 1. Press and hold SLEEP button: 2.
04 Advanced Functions Playing Media Files using the USB Host Feature 2. Connect the external USB storage device you want to record to the USB jack ( ) of the main unit 3. Play a Disc, adjust the Radio frequency or connect the external source to the main unit. CD (See page 19) 500mA PHONES AUX IN 1. Connect the external USB storage device to the USB jack of the main unit. Tuner (See page 27) 2. Select the USB mode by pressing the F( ) button on the main unit.
Advanced Functions 5. To stop recording, press the STOP ( ) button and then automatically create and save as the MP3 file. After the recording, a directory named “RECORDING”(CD), “CD COPY”(MP3 CD), “TUNER RECORDING” or “AUX RECORDING” will be created in your device. ✎ NOTE Do not disconnect the USB or the AC Cord during the recording as this may cause file damage.
05 Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center. 05 Symptom Check/Remedy • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. Playback does not start. • Check the region number of the DVD.
Other Information Information Other Symptom Check/Remedy • The product is not working. (Example: The power goes out or the top panel key doesn't work or a strange noise is heard.) • While “NO DISC” message appears on the display of the product, press and hold the STOP () button on the main unit for longer than 5 seconds with no disc (reset function). • The product is not working normally. The rating level password has been forgotten. Using the RESET function will erase all stored settings.
06 Other Information Specifications General FM Tuner Weight Dimensions Operating Temperature Range Operating Humidity Range Signal/noise ratio Usable sensitivity Total harmonic distortion DVD (Digital Versatile Disc) Disc(1 Disc) CD : 12 cm (COMPACT DISC) CD : 8 cm (COMPACT DISC) Video/Audio Amplifier Component Video 1.78 Kg 200 (W) x 142(H) x 207(D) mm +5°C~+35°C 10 % to 75 % 55 dB 12 dB 0.6 % Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Area Contact Center WebSite ` North America Canada Mexico U.S.A 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
Correct disposal of batteries in this product(optional) (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.