Manual

English 15
Important safety instructions
SAVE THESE INSTRUCTIONSSAVE THESE INSTRUCTIONS
INSTALLING YOUR MICROWAVE OVEN
Place the oven on a at level surface 33.5 inches (85 cm) above the oor. The surface should
be strong enough to safety bear the weight of the oven.
NOT FOR BUILT-IN INSTALLATION
1. When you install your oven, make sure there
is adequate ventilation for your oven by
leaving at least 4 inches (10 cm) of space
behind and on the sides of the oven and
8 inches (20 cm) of space above.
2. Remove all packing materials inside the
oven.
3. Install the roller ring and turntable. Check
that the turntable rotates freely. (Turntable
type model only)
4. This microwave oven has to be positioned so
that the plug is accessible.
4 inches (10 cm)
behind
8 inches
(20 cm) above
4 inches
(10 cm) on
the side
33.5 inches
(85 cm) above
the oor
If the power cord is damaged, it must be replaced by the manufacturer, the
manufacturer’s service agent or similarly qualied persons in order to avoid a hazard. For
your personal safety, plug the power cord into a properly grounded AC socket.
Do not install the microwave oven in hot or damp surroundings such as next to a
traditional oven or radiator. The power supply specications of the oven must be
observed and any extension cable used must have the same specications as the power
cable supplied with the oven. Wipe the interior and the door seal with a damp cloth
before using your microwave oven for the rst time.
CLEANING THE TURNTABLE AND ROLLER
RINGS
Clean the roller rings periodically and wash the turntable as required. You can wash the
turntable safely in your dishwasher.
MS14K6000AS_AA_DE68-04345Q-00_EN.indd 15 6/1/2016 3:52:59 PM