User Manual
Table Of Contents
- 01 Checking the Components
- 02 Product Overview
- 03 Connecting the Sound Tower
- 04 Connecting an External Device
- 05 Connecting a USB Storage Device
- 06 Using the Remote Control
- 07 Using the Samsung Sound Tower App
- 08 Trouble shooting
- 09 License
- 10 Open Source License Notice
- 11 Important Notes About Service
- 12 Specifications and Guide
ENG - 13
NOTES
• Environmental conditions or other factors with connected devices may have an effect on playback
quality.
• If the ADD STEREO LED is solid red an error has occurred in the Stereo Group connection. Try steps
1 and 2 again.
• Remote Controller, BT PAIRING, GROUP PLAY and Source buttons on the SUB Sound Tower are
disabled while in Stereo Group mode.
• The GROUP PLAY button on the MAIN Sound Tower is not available while in Stereo Group mode.
• In any mode other than “BT” (ex. USB, AUX mode), music is played only from the MAIN Sound Tower
and not the SUB Sound Tower.
• The lighting colors between MAIN Sound Tower and SUB Sound Tower may vary.
• This product does not support aptX audio stream with Stereo mode.
• When using the wireless Stereo mode function, sound from a connected microphone is only output
from the system to which the microphone is connected.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Sound Tower main unit - e.g., microwaves, wireless LAN devices, etc.
Disconnecting the wireless Stereo mode
Press the ADD STEREO button (MAIN or SUB) for at least 5 seconds while the Stereo Group is
connected.
• The speaker will beep and the ADD STEREO LED will turn off.