User Guide

3-6
3. Disassembly and Reassembly
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -
NC10
Part Picture Description
LCD
Ass'y
21. Remove the RHE as shown in the picture.
M2 X L4 (4EA)
[Notice]
When you remove the Rubber-LCD-Cap, be careful not to
scratch the Front..
22. Insert your hand into the gap of the LCD Back and the
LCD front and then separate rst, the upper part of the
LCD Front and second, the both sides of the LCD Front
then nally the bottom part of it.
M2 X L4 (4EA)
23. Remove the both sides of Hinge Cover.
24. Conditions after removing the both sides of Hinge Cover.
Winchester_NC10_Eng.indb 6 2008-09-20 오후 1:36:42