User Manual

E-23
Final Checks and User Tips
To complete the installation, perform the following checks and tests to ensure
that the air conditioner operates correctly.
1
Check the following:
 Strength of the installation site
 Tightness of pipe connection to detect gas leak
 Electric wiring connection
 Heat-resistant insulation of the pipe
 Drainage
 Grounding conductor connection
 Correct operation (follow the steps below)
2
Press the button and check the following:
 The indicator on the indoor unit lights up.
 The airflow blade opens and the fan gears up for operation.
3
Press any button and check the following:
 The appropriate indicator lights up and the air conditioner operates
according to the selected mode or function.
4
Press the button and check the following:
 The airflow blades work properly.
After finishing the installation of the air conditioner, explain the following to
the user: (refer to appropriate pages in the User’s Manual.)
1
How to start and stop the air conditioner
2
How to select the modes and functions
3
How to adjust the temperature and fan speed
4
How to adjust the airflow direction
5
How to set the timers
6
How to clean and replace the filters

When you complete the installation successfully, hand over the User’s
Manual and this Installation Manual to the user for storage in a handy and
safe place.
AVXWV@@_IM_E_29819-1_4.14.09.indd 23 2009-4-14 10:15:52