User Manual

31
/ 78
!
WARNING
To avoid risk of electrical shock that can cause death or severe personal injury,
disconnect unit from power before servicing unless tests require power.
8. Operation and Functions
8-6. Icemaker in the Icemaker Room (continued)
3) Icemaker Power OFF :
□ How to Start :
Preparation Work INPUT
-
□ How to Proceed :
Ice
Maker
Press power button of the icemaker for 3sec.
or
4) Icemaker Test Mode :
□ How to Start :
□ How to Proceed :
5) Icemaker Errors
□ Error Display :
Preparation Work INPUT
-
Press power button of the icemaker
6 times within 3sec.
• Display : LED light of Icemaker will turn off. And “off” icon of the inner control panel will light up.
• Icemaker stops making ice.
• Display : Icemaker LED will flash red.
• Ice type(cubed/crushed) selector works 3 times.
• Icemaker motor runs 1 cycle.
(Motor On → Heater On → Water Supply → Motor Off)
□ How to End : same as input to start.
□ How to End : by finishing test
• IM Sensor Error : Error code display and icemaker LED flashing
• IM Heater Error : icemaker LED flashing
□ How to Service :
1) Check the wiring connections in each part and at Main PCB.
2) If normal, change the icemaker to new one.
Test Button
Icemaker LED
flashing at test mode or
error condition