er Manual
Table Of Contents
- Important safety instructions
- Introducing your new oven
- Before you begin
- Operating the oven
- Control panel
- Display
- Setting the temperature
- Control Lockout
- Kitchen Timer
- Timed cooking
- Delay Start
- Using the Temp probe
- Twin cooking mode temperature setting ranges
- Oven functions
- Using the healthy cook feature
- Using the gourmet cook feature
- Using the smart control feature
- Using the oven racks
- Using the gliding rack
- Using the divider
- Using the clean feature
- Settings
- Using the Sabbath feature
- Maintaining your appliance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Instrucciones de seguridad importantes
- Introducción a su nuevo horno
- Antes de comenzar
- Funcionamiento del horno
- Panel de control
- Pantalla
- Ajuste de la temperatura
- Traba de controles
- Temporizador
- Cocción por temporizador
- Retrasar el inicio
- Uso de la sonda de temperatura
- Rangos de ajuste de temperatura del modo de cocción doble
- Funciones del horno
- Uso de la función de Cocina sana
- Cómo utilizar la función de cocción gourmet
- Uso de la función de control inteligente
- Uso de las parrillas del horno
- Uso de la parrilla deslizante
- Uso del divisor
- Uso de la función de limpieza
- Configuración
- Uso de la función Sabbath
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía limitada (Estados Unidos)
- Garantía (CANADÁ)
- Consignes de sécurité importantes
- Présentation de votre nouveau four
- Avant de commencer
- Utilisation du four
- Panneau de commande
- Affichage
- Réglage de la température
- Verrouillage des commandes
- Minuterie
- Cuisson minutée
- Mise en marche automatique
- Utilisation de la sonde thermique
- Plages de réglage de la température en mode de cuisson double
- Fonctions du four
- Utilisation de la fonction cuisson santé
- Utilisation de la fonction cuisson gourmet
- Utilisation de la fonction commande intelligente
- Utilisation des grilles du four
- Utilisation de la grille coulissante
- Utilisation de la plaque de séparation
- Utilisation de la fonction nettoyage
- Paramètres
- Utilisation de la fonction sabbat
- Entretien de votre appareil
- Dépannage
- Garantie (États-Unis)
- Garantie (CANADA)
English 59
Troubleshooting
Displayed
Code
Possible cause Solution
C-23
The temp probe sensor is short
when the oven is operating.
Press OFF, and then restart
the oven. If the problem
persists, disconnect all
power to the oven for at
least 30 seconds and then
reconnect the power. If this
does not solve the problem,
call for service.
C-30
The PCB sensor is open when the
oven is operating.
The PCB sensor is short when
the oven is operating.
C-31
This code occurs if the PCB
temperature rises abnormally
high.
Call for service
-dC- This code appears if the divider
is inserted or removed while the
oven is operating.
Make sure the divider is
inserted properly, and then
restart the oven.
If the problem persists,
disconnect all power to the
oven for at least 30 seconds
and then reconnect the
power. If this does not solve
the problem, call for service.
C-70 The steam sensor is open when
the oven is operating
Press OFF, and then restart
the oven. If the problem
presists, disconnect all power
to the oven for at least 30
seconds and then reconnect
the power. If does not solve
the problem, call the service.
The steam sensor is short when
the oven is operating
C-72 There are drain system-related
problems.
C-A2
The cooling motor is operating
abnormally.
Call for service.
Information codes
OVEN
Displayed
Code
Possible cause Solution
C-d0
This code occurs if the control
key is short for 1 minute.
Clean the buttons and make
sure there is no water on/
around them. Turn off the
oven and try again. If the
problem continues, contact a
local Samsung service center.
C-d1
This code occurs if the door lock
is mispositioned.
Press OFF, and then restart
the oven. If the problem
persists, disconnect all
power to the oven for at
least 30 seconds and then
reconnect the power. If this
does not solve the problem,
call for service.
C-F0
This code occurs if
communication between the
Main and Sub PBA is interrupted.
C-F2
This code occurs if
communication between the
Main and Touch is interrupted.
C-20
The oven sensor is open when
the oven is operating.
The oven sensor is short when
the oven is operating.
C-21
This code occurs if the internal
temperature rises abnormally
high.
NV51K7770S_AA_DG68-00857A-03_EN+MES+CFR.indb 59 2018-08-29 2:18:40