User manual

English 11
Important safety information
• Use a dedicated 120-volt, 60-Hz, 20-amp, AC, fused electrical circuit for this range. A
time-delay fuse or circuit breaker is recommended. Do not plug more than one appliance
into this circuit.
• Do not connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
• This range must be Earth grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electrical shock by providing a path for the electric
current. This range is equipped with a cord having a grounding plug. The plug must
be rmly plugged into an outlet that is properly installed and grounded in accordance
with the local codes and ordinances. If you are unsure whether your electrical outlet is
properly grounded, have it checked by a licensed electrician.
• The range is supplied with a 3-pronged grounded plug. This cord must be plugged into
a mating, grounded 3-prong outlet that meets all local codes and ordinances. If codes
permit the use of a separate ground wire, we recommend that a qualied electrician
determine the proper path for this ground wire.
• Electrical service to the range must conform to local codes. Barring local codes, it
should meet the latest ANSI/NFPA No. 70 – Latest Revision (for the U.S.) or the Canadian
Electrical Code CSA C22.1 – Latest Revisions.
• It is the personal responsibility of the range owner to provide the correct electrical
service for this range.
Installation safety
WARNING
To reduce the risk of re, electric shock, personal injuries, and/or death, obey the following
precautions.
• Have your range installed and properly grounded by a
qualified installer, in accordance with the installation
instructions. Any adjustment and service should be
performed only by qualied gas range installers or
service technicians.
• Do not attempt to service, modify, or replace your
range or any part of your range unless it is specically
recommended in this manual. All other service should
be referred to a qualied technician.
• Always use new exible connectors when installing a gas appliance. Do not use old
exible connectors.
• Make sure the anti-tip device is properly installed on the range. See the installation
instructions for more information.
NX58J7750SS_DG68-00623A-00_EN.indd 11 2015-01-29  12:22:58